SEALEY AP28102BR Add On Mid Box 2 Drawer Retro Black Instructions

SEALEY AP28102BR Add On Mid Box 2 Drawer Retro Black Instructions

Product Information

Specifications

• Model no: AP28102BR
• Dimensions (W x D x H): 712 x 457 x 270mm
• Medium drawer (x2): 570 x 400 x 60mm

Introduction:
Thank you for purchasing the Add-On Mid-Box 2 Drawer Retro in Black with Red Anodised Drawer Pulls. This product is manufactured to a high standard and, if used according to the provided instructions and properly maintained, will give you years of trouble-free performance.

Safety:
Please read the following safety instructions carefully:

• Ensure Health and safety, local authority, and general workshop practice regulations are adhered to when using this product.
• Use caution when handling and assembling the metal components as they may have sharp edges or corners. Wear protective gloves.
• It is important to use common sense and caution while operating this product.

Assembly:
To connect the Mid-Box to the Top Chest and Rollcab, please follow these steps:

1. Place the mid-box onto the roll cab.
2. Fit the connectors into the rectangular holes on the mid-box and fasten them with the provided screws.
3. Place the top chest onto the mid-box and fit the connectors into the top chest. Fasten them with the provided screws.

Operation:
Refer to the provided figures for visual guidance on operating the product.

1. Fig.1:
2. Step 5.1.1
3. Step 5.1.2
4. Step 5.1.3
5. Fig.2:
6. Step 5.2.1
7. Step 5.2.2
8. Step 5.2.3
9. Step 5.2.4
10. Fig.3:
11. Step 5.3.1
12. Step 5.3.2
13. Step 5.3.3

Environmental Protection:
To protect the environment, please follow these guidelines:

• Recycle unwanted materials instead of disposing of them as waste.
• All tools, accessories, and packaging should be sorted and taken to a recycling center for proper disposal.
• When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

Important Notes:

• It is our policy to continually improve products, and therefore, we reserve the right to alter data, specifications, and parts without prior notice.
• No liability is accepted for incorrect use of this product.
• The warranty is valid for 12 months from the purchase date, and proof of purchase will be required for any claims.

Contact Information:
Sole UK Distributor, Sealey Group Kempson Way, Suffolk Business Park, Bury St. Edmunds, Suffolk. IP32 7AR

• Phone: 01284 757500
• Fax: 01284 703534
• Website: www.sealey.co.uk
• Email: sales@sealey.co.uk

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble-free performance.

IMPORTANT :
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

• refer to the instruction manual
• to wear protective

SAFETY

• WARNING! Ensure Health and safety, local authority, and general workshop practice regulations are adhered to when using this product.
• WARNING! Use caution when handling and assembling the metal components. The metal may have sharp edges or corners, the use of protective gloves is recommended.
  • DO NOT open more than one drawer at a time.
  • DO NOT step on the drawers.
  • DO NOT let children play with the roll cab or top chest.
• Ensure all drawers are fully closed and the self-locking catch is activated, before moving the toolbox. Secure the brakes when the rollcab is in the desired position.
• Keep the work area clean, and uncluttered, and ensure there is adequate lighting.
• Keep the mounting frame clean and tidy with good workshop practice.
  • DO NOT use in damp work areas.
• WARNING! The warnings, cautions, and instructions referred to in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood that common sense and caution are factors that cannot be built into this product but must be applied by the operator.

INTRODUCTION

Retro-styled tool chests with modern-day functionality. Features drawers with ball bearing slides and red anodized ‘Lift & Latch’ drawer pulls preventing inadvertent opening. Heavy-duty chrome plated side handles on the chest and stainless handle on the roll cab for easy maneuverability. The top chest is further enhanced with chrome-plated supports on the clamshell lid for easy opening, providing additional storage. Rollcab features stylish heavy-duty castors, two with brakes. All drawers are fitted with liners and lock on one key turn.

SPECIFICATION

• Model no: ………………………………………………….AP28102BR
• Dimensions (W x D x H): …………………….712 x 457 x 270mm
• Medium drawer (x2): ……………………………570 x 400 x 60mm

Assembly

• For connection to the Top Chest and Rollcab see Fig. 4
• Place the mid-box onto the roll cab. Fit the connectors into the rectangular holes and fasten with the screws provided.
• Place the top chest onto the top of the mid-box and fit the connectors into the top chest and fasten with the screws provided.

Operation

To open drawers

• To open: lift the drawer front whilst pulling it out (fig.1).
• To close: shut the drawer firmly until the latch engages.
• If the drawer does not latch, the hook (fig.1) may be misaligned or binding. Bend the hook gently until it is parallel to the drawer edge and engages when closed.

To remove drawers

• Pull the drawer out almost fully.
• Locate the black locking levers (figs. 2 & 3).
• Facing the drawer; lift one lever (fig.2), and push the other lever down (fig.3).
• With both levers deployed, the drawer can be pulled out from the slides.

To replace drawers

• Extend the drawer runners from the cabinet.
• Engage the slides on either side of the drawer carefully into the runners.
• Push the drawer closed squarely until the drawer is closed fully, engaging the locking levers as it goes.

Environmental Protection

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories, and packaging should be sorted, taken to a recycling center, and disposed of in a manner that is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable) into approved containers and dispose of the product and the fluids according to local regulations.

NOTE : It is our policy to continually improve products and as such we reserve the right to alter data, specifications, and parts without prior notice.

IMPORTANT : No liability is accepted for incorrect use of this product.

WARRANTY : The guarantee is 12 months from the purchase date, proof of which will be required for any claim.

Sole UK Distributor, Sealey Group. Kempson Way, Suffolk Business Park, Bury St. Edmunds, Suffolk. IP32 7AR 01284 757500 01284 703534  www.sealey.co.uk  sales@sealey.co.uk

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>