DOMETIC EM12-150 Battery Monitor Instruction Manual

June 15, 2024
Dometic

DOMETIC-EM12-150-Battery-Monitor-10

DOMETIC EM12-150 Battery Monitor

DOMETIC-EM12-150-Battery-Monitor-product

Specifications

Important Notes

  1. Installation and setup must be performed by a qualified technician.
  2. Avoid contact with other electronic devices to prevent damage from static discharge.

Battery monitor

Short Operating Manual

Copyright
© 2023 Dome tic Group. The visual appearance of the contents of this manual is protected by copyright and design law. The underlying technical design and the products contained herein may be protected by design, patent or be patent pending. The trademarks mentioned in this manual belong to Dome tic Sweden AB. All rights are reserved.

List of Figures

DOMETIC-EM12-150-Battery-Monitor-01

Important notes

  • Please read these instructions carefully and follow all instructions, guidelines, and warnings included in this product manual in order to ensure that you install, use, and maintain the product properly at all times. These instructions MUST stay with this product.
  • By using the product, you hereby confirm that you have read all instructions, guidelines, and warnings carefully and that you understand and agree to abide by the terms and conditions as set forth herein. You agree to use this product only for the intended purpose and application and in accordance with the instructions, guidelines, and warnings as set forth in this product manual as well as in accordance with all applicable laws and regulations. A failure to read and follow the instructions and warnings set forth herein may result in an injury to yourself and others, damage to your product or damage to other property in the vicinity. This product manual, including the instructions, guidelines, and warnings, and related documentation, may be subject to changes and updates. For up-to-date product information, please visit documents.dometic.com.

Related documents

Find the installation and operating manual online on https://documents.dometic.com/?object_id=87605.

Safety instructions

WARNING! Electrocution hazard

  • Installation and removal of the device may only be carried out by qualified personnel.
  • Do not disconnect any cables when the device is in use.
  • If this device’s connection cable is damaged, the connection cable must be replaced by the manufacturer, a service agent or a similarly qualified person in order to prevent safety hazards.
  • This device may only be repaired by qualified personnel. Improper repairs can lead to considerable hazards.
  • When the device gets disassembled: Detach all connections. Ensure that no voltage is present on any of the inputs and outputs.

WARNING! Fire hazard

  • Do not place the device on highly flammable surfaces.
  • Do not cover the vents.
  • Avoid the contact with direct heat sources.

WARNING! Health hazard

  • This device can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the device in a safe way and understand the hazards involved.
  •  Electrical devices are not toys. Always keep and use the device out of the reach of very young children.
  • Children must be supervised to ensure that they do not play with the device.
  • Cleaning and user maintenance shall not be made by children without supervision.

CAUTION! Electrocution hazard

  • Do not operate the device if it is visibly damaged.
  • Observe that parts of the device may still conduct voltage even if a fuse has blown.
  • Do not use the device in wet conditions or submerge in any liquid. Store in a dry place.
  • Only use accessories that are recommended by the manufacturer.
  • Do not modify or adapt any of the components in any way.

CAUTION! Damage hazard

  • Before start-up, check that the voltage specification on the data plate is the same as that of the power supply.
  • Ensure that other objects cannot cause a short circuit at the contacts of the device.
  • Ensure that the negative and positive poles never come into contact.

Installing the device safely

WARNING! Electrocution hazard

  • Lay the cables so that they cannot be damaged by the doors or the hood.
  • Crushed cables can lead to serious injury.

CAUTION! Suffocation hazard
Install the device in a well ventilated area.

CAUTION! Risk of injury

  • Ensure that the device is securely fastened so that it cannot get loose under any circum-stances (e. g. sudden braking, accidents) and cause injury to the occupants of the vehicle.
  • When positioning the device, ensure that all cables are suitably secured to avoid any form of trip hazard.

NOTICE! Damage hazard

  • Do not place the device near heat sources (heaters, direct sunlight, gas ovens, etc.).
  • Set up the device in a dry location where it is protected against splashing water.
  • Use ductwork or cable ducts if it is necessary to lay cables through metal panels or other panels with sharp edges.
  • Do not lay the cables so that it is loose or heavily kinked.
  • Do not pull on the cables.
  • Do not place the device near AGM or EFB batteries because they produce flammable, corrosive and explosion gas while working.

Safety precautions when handling batteries

WARNING! Risk of injury

  • Batteries contain aggressive and caustic acids. Avoid battery fluid coming into contact with your body. If your skin does come into contact with battery fluid, wash that part of your body thoroughly with water. If you sustain any injuries from acids, contact a doctor immediately.
  • When working on batteries, do not wear any metal objects such as watches or rings. Lead acid batteries can cause short circuits which can cause serious injuries.
  • Only use insulated tools.
  • Do not place any metal parts on the battery.
  • Wear goggles and protective clothing when working on batteries. Do not touch your eyes when working on batteries.
  • Do not use defective batteries.

WARNING! Health hazard
Keep the battery out of the reach of children.

CAUTION! Electrocution hazard

  • Keep the battery away from water.
  • Avoid short circuits.
  • Avoid clothing rubbing against the battery.
  • Wear antistatic clothing when handling the battery.

CAUTION! Explosion hazard

  • Do not place the battery in a area with flammable liquids or gases.
  • Never attempt to charge a frozen or defective battery. Place the battery in a frost-free area and wait until the battery has acclimatised to the ambient temperature. Then start the charging process.
  • Do not smoke, use an open flame, or cause sparking near the engine or a battery.
  • Keep the battery away from heat sources.

NOTICE! Damage hazard

  • Only use rechargeable batteries.
  • Prevent any metal parts from falling on the battery. This can cause sparks or short-circuit the battery and other electrical parts.
  • Ensure that the polarity is correct when connecting the battery.
  • Follow the instructions of the battery manufacturer and those of the manufacturer of the system or vehicle in which the battery is used.
  • If the battery has to be removed, first disconnect the ground connection. Disconnect all connections and all consumers from the battery before removing it.
  • Only store fully charged batteries. Recharge stored batteries regularly.
  • Do not carry the battery by its terminals.

Safety precautions when handling lithium batteries

CAUTION! Risk of injury
Only use batteries with integrated battery management system and cell balancing.

NOTICE! Damage hazard

  • Only install the battery in environments with an ambient temperature of at least 0 °C.
  • Avoid deep discharge of the batteries.

Intended use

  • The battery monitor is intended to measure the current information about the battery charging and discharging current from a 12 V LifePO4.
  • The battery monitor is not intended to be used with AGM, Gel and Wet batteries.
  • This product is only suitable for the intended purpose and application in accordance with these instructions.
  • This manual provides information that is necessary for proper installation and/or operation of the product. Poor installation and/or improper operating or maintenance will result in unsatisfactory performance and a possible failure.

The manufacturer accepts no liability for any injury or damage to the product resulting from:

  • Incorrect assembly or connection, including excess voltage
  • Incorrect maintenance or use of spare parts other than original spare parts provided by the manufacturer
  • Alterations to the product without express permission from the manufacturer
  • Use for purposes other than those described in this manual

Dome tic reserves the right to change product appearance and product specifications.

Target Group

The mechanical and electrical installation and setup of the device must be performed by a qualified technician who has demonstrated skill and knowledge related to the construction and operation of automotive equipment and installations, and who is familiar with the applicable regulations of the country in which the equipment is to be installed and/or used, and has received safety training to identify and avoid the hazards involved.

Operation

NOTICE! Damage hazard
Avoid any contact with other electronic devices. Static discharge can damage the device.

  • Switching the energy meter on or off:

Making settings

  • Calibrate the display by charging the battery.

Note False data
If other devices are connected to one of the batteries, the state of charge value may be in-correct.

Disposal

  • Recycling packaging material: Place the packaging material in the appropriate recycling waste bins wherever possible.

Recycling products with non-replaceable batteries, rechargeable batteries or light sources:

  •  If the product contains any non-replaceable batteries, rechargeable batteries or light sources, you don’t have to remove them before disposal.
  • If you wish to finally dispose of the product, ask your local recycling center or specialist dealer for details about how to do this in accordance with the applicable disposal regulations.
  • The product can be disposed free of charge.

A complete list of Dome tic companies, which comprise the Dome tic Group, can be found in the public filings of: DOMETIC GROUP AB Hemvärnsgatan 15 SE-17154 Solana Sweden

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals