SIEMENS QA115AFCN Plug On Neutral Electronic Circuit Breakers Instructions

June 15, 2024
SIEMENS

SIEMENS QA115AFCN Plug On Neutral Electronic Circuit Breakers

Specifications

  • Combination Type AFCI:

    • 1-pole: QA115AFCN, QA120AFCN
    • 2-pole: Q215AFCN, Q220AFCN
  • Dual Function:

    • 1-pole: Q115DFN, Q120DFN
  • GFCI Class A 5mA:

    • 1-pole: QF115AN, QF120AN, QF130AN

Product Usage Instructions

Installation

  1. Ensure power to the panel is turned off.
  2. Remove the panel cover.
  3. Identify the appropriate breaker based on your requirements (AFCI, Dual Function, or GFCI).
  4. Connect the ground and neutral conductors in the load centre.
  5. Attach the Plug-On Neutral Terminal to the panel neutral.
  6. Install the breaker into the panel by aligning the terminal with the corresponding slot and pressing firmly until it snaps into place.
  7. Connect the load conductor to the breaker.
  8. Replace the panel cover.
  9. Turn on the power and test the circuit.

Maintenance

  • To ensure optimal performance, it is recommended to periodically check the connections and tighten any loose screws.
  • If any issues or abnormalities are observed, contact Siemens Technical Support for assistance.

FAQ

  • Q: Can I install a Plug-On Neutral Electronic Circuit Breaker without connecting it to the panel neutral?
  • A: No, the Plug-On Neutral Terminal must be connected to the panel neutral for proper operation.
  • Q: How much wire bending space is provided by the small footprint of the Plug-On Neutral Electronic Circuit Breakers?
  • A: The small footprint provides over 4 inches of wire bending space, allowing for easier installation and routing of wires.
  • Q: How can I contact Siemens Technical Support for assistance?
  • A: You can reach Siemens Technical Support by calling 1-800-333-7421 or emailing info.us@siemens.com.

Introductions

  • Siemens Plug-On Electronic Breakers are the perfect wiring solution made easier.
  • The design allows for the same reliable installation method.
  • The small footprint allows for over 4 inches of wire-bending space.
  • The neutral clip is the same, trusted connection as the line side clip.

Simple. Spacious. Secure

  • The CAFCI plug-on breakers now have a single load lug(s) only with the neutral lug removed.
  • These breakers can be installed in the same manner as the thermal magnetic breakers.
  • This allows the installer to land ground and neutral conductors in the load centre before installing the breaker and load conductor.

Our offering

  • 1 and 2-pole CAFCI
  • 1-pole Dual Function (CAFCI/GFCI)
  • 1-pole GFCI

Features

  • Load lug(s) only on the CAFCI breakers
  • Trusted Plug-On Neutral connection
  • LED indicators for troubleshooting
  • Insta-wire connectors

Technical Data

  • 10,000 AIC
  • 120V
  • UL Listed
  • HACR and SWD-rated

Combination Type AFCI

1-pole| QA115AFCN
QA120AFCN
2-pole| Q215AFCN
Q220AFCN
Dual Function
1-pole| Q115DFN
Q120DFN
GFCI Class A 5mA
1-pole| QF115AN
QF120AN
QF130AN

Time Current Characteristic Curves

1-pole Combination Type AFCI

SIEMENS-QA115AFCN-Plug-On-Neutral-Electronic-Circuit-Breakers-
FIG-1 SIEMENS-QA115AFCN-Plug-On-
Neutral-Electronic-Circuit-Breakers-FIG-2

1-pole Dual Function AFCI/GFCI

SIEMENS-QA115AFCN-Plug-On-Neutral-Electronic-Circuit-Breakers-
FIG-3

1-pole GFCI

SIEMENS-QA115AFCN-Plug-On-Neutral-Electronic-Circuit-Breakers-
FIG-5 SIEMENS-QA115AFCN-Plug-On-
Neutral-Electronic-Circuit-Breakers-FIG-6

2-pole Combination Type AFCI

SIEMENS-QA115AFCN-Plug-On-Neutral-Electronic-Circuit-Breakers-
FIG-7 SIEMENS-QA115AFCN-Plug-On-
Neutral-Electronic-Circuit-Breakers-FIG-8

Wiring Diagrams

SIEMENS-QA115AFCN-Plug-On-Neutral-Electronic-Circuit-Breakers-
FIG-9 SIEMENS-QA115AFCN-Plug-On-
Neutral-Electronic-Circuit-Breakers-FIG-10

Dimensional Drawings

SIEMENS-QA115AFCN-Plug-On-Neutral-Electronic-Circuit-Breakers-
FIG-11 SIEMENS-QA115AFCN-
Plug-On-Neutral-Electronic-Circuit-Breakers-FIG-12

CONTACT

Published by Siemens 2020

Printed in USA-CP

  • Order No. CMFL-PONCB-0320
  • All Rights Reserved
  • © 2020, Siemens Industry, Inc.
  • usa.siemens.com/afci.

The technical data presented in this document is based on an actual case or on as-designed parameters, and therefore should not be relied upon for any specific application and does not constitute a performance guarantee for any projects. Actual results are dependent on variable conditions. Accordingly, Siemens does not make representations, warranties, or assurances as to the accuracy, currency or completeness of the content contained herein. If requested, we will provide specific technical data or specifications to any customer’s particular applications. Our company is constantly involved in engineering and development. For that reason, we reserve the right to modify, at any time, the technology and product specifications contained herein.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals