VEVOR WMCPSF02 Wood Stove User Manual
- June 15, 2024
- VEVOR
Table of Contents
VEVOR WMCPSF02 Wood Stove
Product Information
Specifications
Model Series| Fire Box Size (mm)| Diameter of Exhaust Pipe (inch)| Length of
Exhaust Pipe (ft)| Gross Weight (kg)
---|---|---|---|---
WMCPSF02| N/A| 7| N/A| N/A
Product Description
The Wood Stove, model WMCPSF02, is a versatile and efficient heating solution
for your home. It is designed to provide warmth and comfort while minimizing
the environmental impact. The stove features a sturdy construction and comes
with various components for easy assembly and operation.
Product Components
The Wood Stove (model WMCPSF02) comes with the following components:
- Chimney exhaust pipe (7)
- Pipe Holder (7)
- Chimney connecting seat (1)
- Bottom plate (1)
- Folding leg (2)
- Side plate (2)
- Top plate (2)
- Screw (8)
- Chimney cap (1)
- Chimney connecting seat fixing screw (5)
- Grill (2)
- Carry bag (1)
Product Usage Instructions
- Take out the furnace body (Figure 2).
- Open the support legs (Figure 3).
- Open the front and rear bezels (Figure 4).
- Insert the side plates (Figure 5).
- Install Chimney connecting seat screws and cover the top plate 1&2. Note: First install all screws (do not tighten), after all screws are installed and then tightened (Figure 6).
- The pipe with the damper should be kept on at the time of ignition (Figure 7).
- Insert the adapter (the shortest pipe) and install the first chimney with an air conditioner. Please make sure that the internal valve plate is open during ignition. If the flame is out or there is heavy smoke spilling out, please check that the internal valve plate is open.
- Assemble the remaining chimneys. Fasten the pipe holder at the junction of the two chimneys.
- Install a spark-proof chimney at the top.
- To prevent the chimney from shaking, a drawstring can be tied to the ring of the top chimney to fix it.
- Install baking pans on both sides to the left and right sides of the stove.
- The air conditioner at the wood injection port can adjust the firepower.
Frequently Asked Questions
-
Q: Where can I find technical support for the Wood Stove?
A: For technical support or any product-related questions, please contact our customer service team at [email protected]. -
Q: Is there a warranty for the Wood Stove?
A: Please visit our support page at https://www.vevor.com/support for information on our E-Warranty Certificate and support options. -
Q: Where is the Wood Stove manufactured?
A: The Wood Stove is made in China. -
Q: How can I contact the authorized distributors for the Wood Stove?
A: The authorized distributors for the Wood Stove are as follows:- Australia: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia
- USA: VEVOR STORE INC, 9448 RINCHMOND PL #E RANCHO CUCAMONGA, California, 91730 United States of America
- United Kingdom: Pooledas Group Ltd Unit 5 Albert Edward House, The Pavilions Preston, United Kingdom
- Germany: SHUNSHUN GmbH
We continue to be committed to providing you tools with at a competitive price. “Save Half”, “Half Price” or any other similar expressions used by us only represent an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and do not necessarily mean covering all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are saving half in comparison with the top major brands.
Safety & Warning
- Read and understand this entire manual before assembling, installing, operating, or servicing this product. Failure to follow these warnings and instructions can cause death, personal injury or damage to valuable property.
- While assembling this product, keep the work area clean and well-lighted, and keep spectators and children out of the work area.
- When using the stove, please be sure to check whether it is deformed or damaged. Especially if there is a crack or breakage on the glass, never use it.
- When the stove is used once, the color of the stainless steel grid will change. This has nothing to do with badness. It is recommended to burn at a high temperature for 2 hours after the first use.
- When setting the stove, please set it in a flat place.
- When assembling the product, the hand clips and sharp parts may be disassembled up and down. Please be sure to wear gloves for assembly.
- Please pay attention to the use of stoves in tents or extended spaces. Please keep the air well-ventilated.
- Carbon monoxide is a colorless and transparent gas that must be discharged safely to avoid accumulation in a closed environment.
- It is best to place a carbon monoxide detector in the space of the stove. Never let children and pets near the stove, it will be very hot.
- Try to install safety protection devices, and be careful not to let children touch their hands.
- When using the stove, please put it on a fire-resistant floor to prevent the tent floor from catching fire. Please add fuel carefully when opening the fuel injection port.
- Every time you operate the parts of the high-temperature furnace, please use heat-resistant gloves to avoid burns.
- Fuel, propane, fuel nozzle, paint, thinner and combustible materials should be stored away from the stove and ventilation pipes. This kind of combustible material is recommended to be 6 feet (about 180 cm) away from the furnace.
- The furnace may be overturned under special circumstances such as collision, earthquake, and fuel input. Please pay attention to the stove carefully to prevent it from tipping over!
- Don’t touch the heater with your hands when using it, it will cause serious burns.
- Please wait for the stove to cool sufficiently before storing it to prevent burns. Please pay attention. Pots, vermicelli, pots and other objects heated on the stove should be prevented from being stable and falling off! Don’t use the fuel tank to make a fire. Fuel such as fuel tanks and ignition devices containing combustible gas may explode in the furnace, causing serious injury, injury, death, and fire.
- During the use of the furnace, it needs to be confirmed continuously. Don’t leave the burning furnace unattended for a long time.
- When storing the stove, carefully observe the surroundings to prevent Mars from igniting the surrounding environment
- It’s better to have a fire extinguisher of suitable size nearby. To decide the size, please discuss it with the local fire department.
- Pay attention to the choice of fuel. Or paint-treated wood will discharge harmful toxins when it burns. Please pay attention when there are no toxic chemicals in the fuel. This product should be installed with a chimney and used. Please keep the fuel injection port closed except for injection.
- When installing the chimney, please pay attention to whether the abnormal airflow at least 3m in the sky is suitable for the surrounding environment. After use, please wipe off the flow, dust, food, and other leaves and store them after wiping off.
- In the manufacturing process, small scratches in the assembly process have no style in the use of products, so they have nothing to do with product quality.
Specifications
| Model Series | WMCPSF02 |
|---|---|
| Fire Box Size(mm) | 320×205×160 |
| Diameter of Exhaust Pipe (inch) | 2.4 |
| Length of Exhaust Pipe (ft) | 6.8 |
| Gross Weight (kg) | 5.9 |
| MEAS(mm) | 375×265×225 |
Product Description
Part
| Description|
Qty
---|---|---
1| Chimney exhaust pipe| 7
2| Pipe Holder| 7
3| Chimney connecting seat| 1
4| Bottom plate| 1
5| Folding leg| 2
6| Side plate| 2
7| Top plate| 2
8| Screw| 8
9| Chimney cap| 1
10| Chimney connecting seat fixing screw| 5
11| Grill| 2
12| Carry bag| 1
Assembly Instructions
-
Take out the furnace body.
-
Open the support legs.
-
Open the front and rear bezels.
-
Insert the side plates.
-
Install Chimney connecting seat screws and Cover the top plate 1&2.
NOTE: First install all screws (do not tighten), after all screws to be installed and then tightened.
-
Insert the adapter(the shortest pipe) and install the first chimney with an air conditioner. Please make sure that the internal valve plate is open during ignition. If the flame is out or there is heavy smoke spilling out, please check that the internal valve plate is open.
-
Assemble the remaining chimneys. Fasten the pipe holder at the junction of the two chimneys.
-
Install a spark-proof chimney at the top.
-
To prevent the chimney from shaking, a drawstring can be tied to the ring of the top chimney to fix it.
-
Install baking pans on both sides to the left and right sides of the stove.
-
The air conditioner at the wood injection port can adjust the firepower.
Contact Information
-
Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia.
-
Imported to USA: VEVOR STORE INC, 9448 RINCHMOND PL #E RANCHO CUCAMONGA, California, 91730 United States of America.
-
Pooledas Group Ltd
Unit 5 Albert Edward House, The Pavilions Preston, United Kingdom. -
SHUNSHUN GmbH
Römeräcker 9 Z2021, 76351 Linkenheim-Hochstetten, Germany.
Support and E-Warranty Certificate
https://www.vevor.com/support
Made In China.