nave 2088022 TESSILE Floor Lamp User Manual
- May 15, 2024
- nave
Table of Contents
nave 2088022 TESSILE Floor Lamp
Product Information
Specifications
- Model: 20880xx
- Input Voltage: 220-240V~
- Frequency: 50Hz
- Dimensions: 150cm x 36cm x 180cm
- Power: 1x E27 max. 40W
Product Usage Instructions
Safety
Before using the product, ensure that it is suitable for your intended use. Follow these safety guidelines:
- Complete installation before connecting to the mains.
- Disconnect the mains voltage or mains plug before starting any work.
- Avoid pulling the cable to unplug the mains plug, always handle the plug directly.
- Avoid hazards from electrically conductive objects or media.
Installation
Follow these steps for installation:
- Disconnect the mains voltage or mains plug before starting work.
- Avoid bending or crushing the cable excessively.
- Ensure the electrical installation maintains protection against electric shock.
Cleaning and Care
Follow these guidelines for cleaning and maintenance:
- Use a soft, dry cloth for regular cleaning.
- For severe soiling, use a soft and slightly damp cloth.
- Avoid using solvents for cleaning to prevent damage to the product.
Cleaning the Lampshade
To clean the lampshade:
- Use a lint-free cloth or lint roller to gently wipe the fabric.
- For deeper cleaning, use a vacuum cleaner with an upholstery brush attachment set to the lowest suction level.
- In case of severe soiling, carefully remove the lampshade for cleaning with warm water and a soft brush.
FAQ
Q: Can the product be used in commercial settings?
A: The product is intended for use in private households only and not for commercial use.
Q: What should I do with the product at the end of its life?
A: Follow the disposal regulations in your country. Disconnect the product from the power supply, dismantle it, and then dispose of it properly.
2088022, 2088023
PRODUCT OVERVIEW
Intended use
Other uses or modifications of the product are considered improper and can lead to risks such as injury and damage. The manufacturer accepts no liability for damage resulting from improper use.
- The product is approved for use in all EU countries.
- The product is intended for use indoors.
- The product is intended for use in private households only and not for commercial use.
- Do not connect the product to the mains when it is in its packaging.
- Before using the product, make sure that it is suitable for your intended use.
Safety
Fully complete the installation of the product, before connecting to the mains.
Warranty/Guarantee
Information on the warranty can be found in our General Terms and Conditions
on the Internet at www.naeve.de.
Scope of delivery
- Operating instructions
- Lights
Installation
DANGER
Electric shock
- Disconnect the mains voltage or mains plug before starting work.
- Do not unplug the mains plug by pulling the cable, always take hold of the mains plug directly.
- Make sure that no hazards can be caused by electrically conductive objects or media.
- Make sure that the type of electrical installation does not reduce the protection against electric shock (protection class, protective insulation).
- Make sure that the cable is not bent excessively or crushed.
Non-compliance with these instructions will result in serious or fatal injury.
Cleaning and care
DANGER
Electric shock
- Disconnect the mains voltage or mains plug before starting work.
- Do not unplug the mains plug by pulling the cable, always take hold of the mains plug directly.
- Make sure that no moisture from gets into connection compartments or on live parts.
Non-compliance with these instructions will result in serious or fatal injury.
NOTE
Damage to the product
- Do not use any solvents for cleaning.
- Non-compliance with this instruction can cause damage to property.
- Use a soft, dry cloth for cleaning.
- In case of severe soiling, use a soft and slightly damp cloth to clean the product.
Cleaning the lampshade
- To clean, use a lint-free cloth or a lint roller and wipe the fabric gently, to ensure that you do not rub dirt into the lampshade.
- To clean, use a vacuum cleaner set to the lowest suction level with an upholstery brush attachment.
- In case of severe soiling, remove the lampshade and clean it carefully with warm water, a soft brush and a little washing-up liquid. Once the dirt is removed, rinse the lampshade with clean water and allow it to dry at room temperature (not in direct sunlight).
Repairs and spare parts
NOTE
Unsuitable parts
- Use original spare parts and accessories from the manufacturer only.
- Non-compliance with this instruction can cause damage to property.
- In case of complaint, contact your responsible specialist dealer or contact our service hotline directly.
- Telephone number: +49 (0)7947 9100-0
- E-mail: info@naeve.de
For technical questions, please state the seven-digit item number as well as the five-digit order number (for example 1234567 / 16999). The order number can be found on the type plate.
Disposal
Do not dispose of old appliances with household waste!
If the product can no longer be used, every consumer is legally obliged to
dispose of old appliances separately from household waste, e.g. at a
collection point in their municipality/district. This ensures that old
appliances are disposed of properly.
Dispose of the product in accordance with the applicable regulations,
standards and safety instructions in your country.
- Disconnect the product from the power supply.
- Disassemble the product.
- Dispose of the product.
References
- Näve Leuchten: Ihr Partner für Lampen, Leuchten, LEDs und mehr
- Näve Leuchten: Ihr Partner für Lampen, Leuchten, LEDs und mehr
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>