Ronix 5003 Dual Bevel Sliding Miter Saw Instruction Manual
- June 1, 2024
- Ronix
Table of Contents
Ronix 5003 Dual Bevel Sliding Miter Saw
Technical Specification
- Model: 5003
- Blade Diameter: 255mm
- Bevel Type: Dual Bevel
- Operation: Sliding Miter Saw
Includes
- Wrench
- Carbon Brush
- Dust Bag
- Vise Screw
- Angle Handle
- Extension Board
User Manual
Comprehensive user manual for proper usage and maintenance.
Parts List
- Safety Button
- Handle
- Fixed Guard Sliding Lever
- Release Locking Handle Movable Fence
- On/Off Switch
- Movable Guard
- Laser Switch Fence Movable Base
- Sliding Base
- Fixed Base
- Holder
- Gradient Base
- Base Locking Holder
- Adjustment Handle
Note: Safety precautions and proper handling
instructions are crucial for safe operation.
Safety Instructions
- Safety is a combination of common sense, staying alert, and understanding the tool’s operation.
- Avoid plugging in the saw until all setup steps have been completed.
- Check for damaged parts, misalignment, jamming, breakage, improper mounting, and other issues before use.
- Make the workshop childproof to prevent accidents.
- Avoid operating the tool under the influence of substances that impair judgment.
Product Usage Instructions
- Ensure the work area is clear and well-lit.
- Familiarize yourself with the parts and controls of the mitre saw.
- Securely position and clamp the workpiece before cutting.
- Select the appropriate angle and bevel settings for your cut.
- Wear appropriate safety gear, including eye protection and hearing protection.
- Start the saw following the manufacturer’s instructions.
- Avoid distractions and maintain focus on the cutting task.
- After use, turn off the saw and wait for the blade to come to a complete stop before moving the workpiece.
- Clean the saw and store it properly after use.
TECHNICAL SPECIFICATION
- Model 5003
- Power 1800W
- Voltage 220-240V
- Frequency 50-60Hz
- No load speed 5000RPM
- Disk diameter 255mm
- Max Cutting Capacity at 0°/90° 310×89mm
- Max Cutting Capacity at 45°/90° 218×89mm
- Max Cutting Capacity at 0°/45° 310×48mm
- Max Cutting Capacity at 45°/45° 218×48mm
- Weight 19.2Kg
- Includes: Wrench, Carbon Brush, Dust Bag, V is Screw, Angle Handle, Extention Board.
PART LIST
Safety is a combination of common sense, staying alert and knowing how your compound miter saw works.
WARNING: TO AVOID MISTAKES THAT COULD CAUSE SERIOUS INJURY, DO NOT PLUG IN THE SAW UNTIL THE FOLLOWING STEPS HAVE
BEEN READ AND UNDERSTOOD
- Read and become familiar with this entire instruction manual. learn the tool’s applications, limitations, and possible hazards.
- Avoid dangerous conditions. Do not use power tools in wet areas or expose them to rain. Keep work areas well-lit.
- Do not use power tools in the presence of flammable liquids or gases.
- Always keep your work area clean, uncluttered and well-lit. Do not work on floor surfaces that are slippery with sawdust or wax.
- Keep by standers at a safe distance from the work area, especially when the tool is operating. never allow children near the tool.
- Do not force the tool to do a job for which it was not designed.
- Dress for safety. Do not wear loose clothing, gloves, neckties or jewellery (rings, watches) when operating the tool. they can get caught and draw you into moving parts always wear non-slip footwear. And tie back long hair.
- Wear a face mask or dust. The sawing operation produces dust.
- Always remove the power cord plug from the electrical outlet when making adjustments, changing parts, cleaning or working on the tool.
- Keep guards in place and working order.
- Avoid accidental start – UPS. Make sure the power switch is in the OFF position before plugging in the power cord.
- Remove adjusting tools. Always make sure all tools are removed from the saw before turning it on.
- Never leave a running tool unattended. Turn the power switch to OFF Do not leave the tool until it has come to a complete stop.
- Never stand on a tool. Serious injury could result if the tooltips are accidentally hit. Do not store anything above or near the tool.
- Do not overreach. Keep proper footing and balance at all times. Wear oil-resistant rubber-soled footwear. Keep the floor clear of oil, scrap, and other debris.
- Maintenance tools Properly. always keep tools clean and in good working order. Follow instructions for lubricating and changing accessories.
- Check for damaged parts. Check for alignment of moving parts, jamming, breakage, improper mounting, or any other conditions that may affect the tool’s operation. any part that is damaged should be properly repaired or replaced before use.
- Make the workshop childproof. Use padlocks, and master switches and always remove starter keys.
- Do not operate the tool if you are under the influence of drugs, alcohol or medication that could affect your ability to use the tool properly.
255mm DUAL BEVEL SLIDING MITER SAW
QR SCAN
FAQ
- Q: What should I do if I notice any damaged parts on the miter saw?
- A: If any part is damaged, it should be properly repaired or replaced before further use to ensure safe operation.
- Q: Can I operate the mitre saw under the influence of medication?
- A: It is advised not to operate the tool if you are under the influence of drugs, alcohol, or medication that could affect your ability to use the tool properly for safety reasons.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>