proxicast ANT-140-020-25 25 ft SMA Male to N Male Coax Cable Instruction Manual
- June 6, 2024
- proxicast
Table of Contents
- Applications
- Product Features
- General Description
- Ordering Information
- Specifications
- Signal Attenuation Including Connectors
- Mechanical Dimensions
- Additional Product Images
- Installation Instructions
- Contact Information
- Important Notice
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ANT-140-020-25
25 ft SMA Male to N Male Coax Cable (240 size)
Applications
- 3G/4G/LTE Antennas
- Cellular Modems, Routers & Amplifiers
- GPS Receivers
- ADS-B Receivers
- HAM Radio Equipment
- NOT for use with TV or WiFi Applications
Product Features
- SMA Male Connector
- N Male
- 50 Ohm Solid Copper Core
- Thin and Flexible
- Gold Plated Signal Pins
- PE Outer Jacket – 0.240-inch Diameter
- Heat Shrink Tubing on Connectors
- Low Signal Loss at Common Wireless Frequencies
General Description
Proxicast’s ANT-140-020-25 SMA to N coax cable is the perfect solution for
extending 3G/4G/LTE, GPS, ADS-B, or other antennas with N Female connectors up
to 25 ft from their radio source. It can also be used to connect to inline
lightning arresters, amplifiers, or other equipment with N-Female connectors.
All of Proxicast’s coax extension cable assemblies are constructed with top-
quality extremely low-loss cable and gold plated connectors. Each cable
assembly is fully tested.
CFD240 coax is the same diameter as RG8X but has far superior performance
characteristics, matching or exceeding LMR240 cable.
The cable’s tough polyethylene jacket withstands abrasions and provides
excellent moisture resistance. This cable assembly can be used indoors or
outdoors.
For cellular (700 – 2700 MHz) applications, Proxicast recommends 195-size coax
for assemblies up to 10 ft, 240-size up to 25 ft, and 400-size up to 75 ft. It
is acceptable to use a thick cable for the long portion of a cable run and a
short thin cable to connect to equipment or antennas, just minimize the total
cable length and number of connectors.
All outdoor coax connections must be weather-proofed to prevent damage caused
by moisture entering the connectors. Use our Pro-Grade Self-Bonding Silicone
Tape (ANT-900-002) for fast & easy connection sealing.
NOTE: This cable assembly has a standard SMA connector, not the reverse
polarity SMA connector typically found on WiFi equipment. Standard and reverse
SMA connectors will not mate; nor will they mate with the “F” connectors found
on most consumer video equipment (TV, cable boxes, etc.).
Ordering Information
| Part No. | Description |
|---|---|
| ANT-140-020-25 | Proxicast 25 ft Low-Loss Coax Extension Cable (50 Ohm) – SMA |
Male to N Male
Specifications
| Parameter | Rating |
|---|---|
| Connector 1 | SMA Male (Inline Plug) |
| Connector 2 | N Male (Inline Plug) |
| Cable Length | 25 ft (7.62m) |
Coax Type
| Low-loss CFD240-E1 (0.240 inch / 6.1 mm diameter) Meets or exceeds
specifications of LMR2402 Not rated for direct burial or plenum applications
Jacket Material| Polyethylene (PE)
Color| Black
Impedance| 50 Ohm
Capacitance| 79.0 pF/ft
Velocity of Propagation| 84%
Minimum Bend Radius| 0.75 inch (19.1 mm)
Operating Temperature| -40°F to +185°F| (-40°C to +85°C)
Signal Attenuation Including Connectors
| Frequency (MHz) | Loss (dB) |
|---|---|
| 700 | 1.9 |
| 900 | 2.1 |
| 1700 | 3.0 |
| 1900 | 3.2 |
| 2400 | 3.6 |
| 2700 | 3.8 |
| 5000 | 5.3 |
| 5800 | 5.7 |
Operation outside the parameter ranges given above may cause permanent damage.
¹CFD is a trademark of Raison Enterprise Co. Ltd. (Commate)
²LMR is a trademark of Times Microwave Corporation
Mechanical Dimensions
CFD240 Coaxial Cable
Additional Product Images
Installation Instructions
- Observe minimum bend radius during installation and handling
- Do not cut or splice
- Minimize the number of connectors and total length of the cable run
- Fully tighten coax connectors to antenna connectors
- Weather seal outdoor coax connections
- Install in-line lightning protection if required by local building, fire, insurance or safety codes
- Not rated for direct burial or plenum applications
Contact Information
For the latest specifications, additional product information, worldwide sales, and information about Proxicast:
Web:www.proxicast.com Tel:
1-877-777-7694
Email:sales@proxicast.com
1-412-213-2477
Proxicast • 312 Sunnyfield Drive, Suite 200 • Glenshaw, PA 15116 USA
For technical questions and application information:
Email:support@proxicast.com
Important Notice
The information contained herein is believed to be reliable. Proxicast makes
no warranties regarding the information contained herein. Proxicast assumes no
responsibility or liability whatsoever for any of the information contained
herein.
Proxicast assumes no responsibility or liability whatsoever for the use of the
information contained herein. The information contained herein is provided “AS
IS, WHERE IS” and with all faults, and the entire risk associated with such
information is entirely with the user. All information contained herein is
subject to change without notice.
The information contained herein or any use of such information does not
grant, explicitly or implicitly, to any party any patent rights, licenses, or
any other intellectual property rights, whether with regard to such
information itself or anything described by such information. Proxicast
products are not warranted or authorized for use as critical components in
medical, life-saving, or life-sustaining applications, or other applications
where a failure would reasonably be expected to cause severe personal injury
or death.
Data Sheet: Rev B 12/29/18
© Copyright Proxicast, LLC. All rights reserved.
Disclaimer: Subject to change without notice
www.proxicast.com •
1-877-777-7694
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>