PA-40 4G on Board Compact Black SCOUT Instructions

: June 15, 2024
: SCOUT

Table of Contents

PA-40 4G on Board Compact Black SCOUT
Product Information
- Specifications
Product Usage Instructions
Frequently Asked Questions (FAQ)
Q: How can I hide the SIM Injector?

PA-40 4G on Board Compact Black SCOUT

Product Information

Specifications

Product Name: 4G onBoard Compact
Manufacturer: Scout S.r.l.
Country of Origin: Italy
Connectivity: 4G/WiFi
Power Input: +/- 12V DC
Recommended Mounts:
- PA-40 (code: PF AC NBASE013)
- PA-83 (code: PF AC NBASE017)
- PA-42 (code: PF AC NBASE016)
Optional Accessory: PI-5 (code: PF AC AMP06)
Manufacturer’s Address: Via E. Fermi 90, 41010 Limidi di Soliera MO, Italy
Website: scoutantenne.com
Email: scout@scoutantenne.com

Product Usage Instructions

Installation Scheme

The installation scheme may vary depending on the type of vessel. Follow the steps below:

Position the dome in a suitable location.
Connect the Ethernet cable from the dome to the SIM Injector.
If desired, connect an Ethernet cable from the SIM Injector to the LAN.
Connect the power cable to the +/- 12V DC power source.

Mounting the SIM Injector

Use one of the recommended mounts (PA-40, PA-83, or PA-42) to securely install the SIM Injector. Follow the manufacturer’s instructions provided with the mount.

Optional Accessory: PI-5

If you wish to install the SIM Injector in a hidden position, you can use the optional accessory PI-5. Follow the steps below:

Drill a mounting hole of M21 with a cutoff of 19.2mm.
Attach the PI-5 using the provided screws.
Connect the flexible tape with SIM card connector to the SIM Injector.
Secure the IP67 cap to protect the SIM card slot.

Frequently Asked Questions (FAQ)

Q: Can I use this product on any type of vessel?

A: Yes, the positioning of the dome may vary depending on the type of vessel.

Q: What is the recommended power source for this product?

A: The product requires a +/- 12V DC power source.

Q: How can I hide the SIM Injector?

A: You can use the optional accessory PI-5 to install the SIM Injector in a hidden position, such as behind a wall or panel.

Installation

Recommended mounts

(code: PF AC NBASE013)
(code: PF AC NBASE017)
(code: PF AC NBASE016)

Optional

The PI-5 is the suggested optional for installing the SIM injector in a hidden position (e.g. behind a wall/panel). The PI-5 provides a 20cm length flexible tape with SIM card connector and a secure IP67 cap to protect the SIM card slot. Requested mounting hole of M21 with cutoff 19.2mm. (code: PF AC AMP06)