Scout Security SAMC01W-V3 HD Camera Installation Guide

HD CAMERA
INSTALL GUIDE

Package Contents

HD Camera x 1
USB Cord x 1
Magnet Plate x 1
Power Adapter x 1
Adhesive x 1
Install Guide x 1

1. Infrared LED
2. Lens
3. Microphone
4. Speaker
5. USB Power Input
6. Status Light
7. Setup Button
8. Magnetic Base

Kinetic Secure Home App

1. Access or download your Go Kinetic app in the Apple App Store or Google Play Store. Scan this QR code to get started:http://onelink.to/jdz9j8
2. Log in to your Go Kinetic app if you are an existing customer; create your password if you are a new customer.
3. Locate Kinetic Secure Home under the services tab.
4. You can also download the Kinetic Secure Home mobile app for iOS or Android directly from the Apple App Store or Google Play Store.

Setup Instructions

1. Insert the USB into the camera power port and wait 30 seconds for the camera to initialize. The indicator light will blink.
2. Press and hold the RESET button. The camera will sound the voice prompt “Ready to Setup.”
3. In the Kinetic Secure Home app, tap “Add New Device,” then select HD Camera.
4. Make sure your phone is connected to your home’s WiFi. When prompted, input your WiFi password into the Kinetic Secure Home app. The app will then generate a QR code on your device.
5. Use the camera to scan this code. The camera will sound the voice prompt “QR Code Scanned.”
6. The camera will reboot to connect to your home WiFi. This process will take up to two minutes. When the camera’s connection is successful, it will say “Setup Completed.”
7. Name your camera in the Kinetic Secure Home app.
8. Repeat these steps for each additional camera, as prompted in the Kinetic Secure Home app.

Questions?

If you have questions or need help at any time during installation:
Search our knowledge base articles by visiting us online: www.GoKinetic.com
Call our Support Team: 800-347-1991

Camera Placement

1. The camera has a 125 ft. range and should be installed within 125 ft. of your WiFi router or WiFi extender.
2. The camera swivels on its magnetic base to your preferred viewing angle. The live view can be rotated 180 degrees, allowing for ceiling mounting.
3. The camera has a 110-degree field of view. To prevent false motion alerts, it should not point towards windows.

Light Explanation

Yellow (solid) – Power on, initializing
Yellow (flashing) – Ready to connect
Yellow & Blue (flashing) – Connecting to the application
Blue (flashing) – Finishing setup
Blue (solid) – Setup complete, camera connected successfully

FCC WARNING

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.

FCC RADIATION EXPOSURE STATEMENT
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>