Vanguard Scout Vera-Fi Audio Entry Level Loudspeaker Owner’s Manual

September 25, 2024
Vanguard Scout

Vera-Fi Audio Entry Level Loudspeaker

Specifications

  • Drivers:
    • 1 x 5.25 treated paper cone woofer
    • 1 x 25mm silk dome tweeter
  • Sensitivity: 84.5dB
  • Power Handling: 50W
  • Nominal Impedance: 8 ohms

Product Usage Instructions

Installing and Removing Grill

The grill is held on by pins. To remove, gently hold the grill
and pull straight away from the speaker. To install, align the pins
and push into place.

Connecting Your Speakers

Ensure proper speaker connections by matching positive and
negative terminals on both the speaker and amplifier. Use quality
speaker cables for optimal performance.

Placement and Positioning

Speaker placement is crucial for optimal sound quality. Place
the speakers on a solid surface to prevent vibration. Consider
using speaker stands for the best acoustics. Position tweeters at
ear level for the best listening experience. To reduce bass
resonance, block the rear port with foam if needed.

FAQ

What does the warranty cover?

The Vanguard Scout comes with a 3-year limited warranty covering
parts and labor for production and material defects. It does not
cover accidents, abuse, poor maintenance, transportation costs to
repair center, self-repair attempts, or modifications to the
speaker.

How should I clean the speakers?

Clean the speakers only with a dry, cotton, or microfiber cloth.
Avoid using liquids or excess moisture on the speakers.

Where can I get service or repairs?

If any issues arise, contact Vera-Fi Audio for a Return
Merchandise Authorization (RMA) number and repair address. Retain
the original packaging for any potential returns.

Installing and Removing Grill
The grill is held on by pins. Gently hold the grill and pull straight away from the speaker to remove. To install, align the pins and push into place.
Warranty And Contact Information
Vanguard Scout comes with a 3-year limited warranty that includes parts and labor for production and material defects. This warranty does NOT cover:
Accidents, abuse, poor maintenance, or otherwise inappropriate use
Transportation cost to repair center Any attempts to self repair, or otherwise modify the
speaker
Should any issues arise, please contact us for an Return Merchandise Authorization (RMA) number and address for repair. Please retain original packaging.
Verafiaudiollc.com

Email: Phone:

verafiaudiollc@gmail.com 818-584-6870

Owner’s Manual Vera-Fi Audio LLC

Thank you for your purchase of the Vanguard Scout!
Please read and follow all instructions for proper care, best performance and reliability of your loudspeakers.
Attention!
Do not expose to excess moisture or liquids. Keep in a dry location and do not place liquids on or near the speakers.
Keep away from sources of heat or prolonged exposure to direct sunlight.
Clean only with a dry, cotton or microfiber cloth. No user-serviceable parts inside. Please refer any and all
service to qualified service personnel by contacting Vera-Fi Audio
Connecting Your Speakers
Scout comes standard with a single set of 5-Way binding posts for each speaker that accept either banana plugs, pins, spades, or bare/tinned wire. When using bare or tinned wire, ensure that only the necessary amount of wire is exposed and in all manner of connections maintain proper distancing between conductors. Shorted cables across the terminals could damage your amplifier or speakers. Attach positive (+) to the red terminal and negative (-) to the black terminal. This connection should correlate to the connections from your amplifier for proper phase.

Placement and Positioning
Speaker placement is a personal preference and is room dependent for best acoustics. For best performance the speakers should be placed on a solid surface that will not vibrate or resonate, speaker stands being the best option. Tweeters should be at ear level at your listening position. Should bass be overpowering due to being close to a wall, you can block the rear port with foam to reduce resonance and room interaction.
Specifications

Drivers:

1 x 5.25″ treated paper cone woofer 1x 25mm silk dome tweeter

Sensitivity: Power Handling: Nominal Impedance:

84.5dB 50W 8

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals