Freshin DL-Sensor-AU Motion Sensor LED Down Light Instruction Manual
- June 15, 2024
- Freshin
Table of Contents
MOTION SENSOR LED DOWN LIGHT
INSTALLATION INSTRUCTIONS Model: DL-Sensor-AU
The Downlight offers 3 color temperatures in one fitting
WARNING: THIS FITTING MUST BE INSTALLED BY A LICENSED ELECTRICIAN !
Specifications
Rated Voltage: AC240V~50Hz
Model| Wattage| CCT| Cut-out Size| Lumen|
Induction Distance| IP Rating
---|---|---|---|---|---|---
DL-Sensor-AU| 9W| 3000K
4000K
5700K| 90mm| 750Im
850Im
810Im| Max. 8m| IP40 (IP44 for front)
Safety Tips
- Always ensure the power is OFF and the LED downlight has cooled down before performing any maintenance, cleaning or making any adjustment to the recessed luminaire.
- The external flexible cable or cord of this luminaire cannot be replaced; if the cable or cord is damaged, the luminaire shall be destroyed.
- The luminaire must not be used if the protective shield has been cracked.
- Replace any cracked protective shield before using the luminaire.
- The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced. There are no serviceable parts, do not attempt to dismantle or open the product.
- To avoid injury or damage to the luminaire, ensure that power leads and screws are secure before connecting the power.
- Ensure that the fitting does not come in contact with corrosive chemicals/solvents or abrasive cleaners efc.
- To clean, wipe with a soft damp clean cloth.
Do NOT soak or immerse the product in water or other liquids.
Installation
Before installation, please make sure the power is off
-
Before installation, plug the downlight into a socket outlet to ensure it is working correctly.
-
Select the colour temperature via the switch on the back of the downlight. (Fig. 2)
Note: The downlight must be turned off before using the switch to change the color temperature. -
Cut an installation hole of 90mm into the ceiling. (Fig. 1)
-
Insert the plug into the socket outlet and ensure it is fully plugged in. (Fig. 2)
-
Push the springs up and put the downlight up through the cut out hole and into the ceiling. (Fig. 3)
-
After the installation, switch on the LED downlight and test all the lighting functions.
-
Aclosed luminaire that allows building insulation to come into contact with s sides and to cover it.
-
Type IC-4 recessed luminaire can be used together with building insulation that can safely be exposed continuously to temperatures up to 90°C may abut and cover the luminaire; RISK OF FIRE – Required clearance from structural members and building elements
SCB =50 mm
HCB =50 mm
Sensor Specification
| Item | Parameter |
|---|---|
| Standby Power | <0.5W |
| Block Time | 0.2s |
| Detection Angle | 1000 |
| Time Delay | 70±10s |
| Detection Distance | Max. 8m |
| installation Height | 1.8m – 2.5m |
No Manual Override
Sensor Operates Day and Night
Sensor Information:
Recommended Height of Installation: 1.8~2.5m
Detection Distance: Max. 8m
Height: 1.8M = 4 meter detection range
Height: 2.5M = 8 meter detection range
*Note: The detection distance will vary with change of installation
height
Any questions or suggestions are welcomed
****Phone:+61 478169288
Email: customerservice@freshin.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>