Tongli SR2415 Galaxy Rocket Four Axis Aircraft Instruction Manual

AGE 14+

GALAXY ROCKET FOUR AXIS AIRCRAFT

OPERATION MANUAL

Thank you for choosing our product. Please read this manual carefully before flying.
Retain this manual for future reference.
As inconsistent with the specification in pictures please prevail in kind.

IMPORTANT NOTICE

• This product is suitable for people over 14 years old. Please ensure that it is operated in a safe environment. Please use it correctly in strict accordance with the safety precautions and operating instructions. Any modification, disassembly or improper use may cause unpredictable hazards or accidents. Please do not despise it.

• Scope of responsibility of the company: improper assembly by users, unsafe environment, unauthorized modification, disassembly and other illegal operations.

• This product is a high-tech operation consuming commodity. If it is disassembled, refitted and used, it may cause damage to parts. If it is defective due to any improper operation, it will not be able to replace new products or return them within the warranty conditions. In case of operation and maintenance problems, our agent or after-sales service will provide technical guidance and special price parts supply services.

• The aircraft is a dangerous commodity. When flying, please keep away from people and obstacles. Improper assembly or damage of parts, poor electronic control equipment and improper operation within a safe distance (more than 4m) may lead to flight out of control, resulting in unpredictable damage and unexpected accidents. Pilots must pay attention to safe flight and understand the flight requirements and responsibilities in detail.

• This product is suitable for indoor and outdoor use. It is strictly prohibited to use in areas with high voltage hazards and prohibited by the state.

• When this product is not used for a long time, please turn off the power and take out the battery to prevent the danger of battery leakage.

• Clean this product with a clean soft cloth.

• Avoid exposure to the sun or heat.

• Avoid using when the wind force exceeds Grade III.

• Do not immerse the toy in water, otherwise the electronic parts will be damaged.

• Check the plug and other accessories regularly. If any damage is found, please stop using it immediately until it is completely.

The company has the final interpretation right of this instruction manual

LIST OF ACCESSORIES

Rocket X1       Remote control X1          Spare blade X4

USB charger X1             Screwdriver X1

Battery module X1            Instruction manual X1

NAMES OF CONTROLLER

1. One button calibration

2. One click tumble

3. Right trim

4. Front trim

5. Forward and backward
   Left and right side flight

6. Rear fine adjustment

7. Power switch

8. Short press to avoid obstacles
   Press again to exit obstacle avoidance

9. Rise and fall
   Left and right rotation

10. One touch takeoff and landing
    Long press the emergency stop

11. Left trim

12. Speed exchange

13. Headless mode
    Long press return

DRONE BATTERY INSTALLATION

• Install the drone battery module in the direction shown in the figures to the drone battery holder.(Figure 1)
• The battery module finished installation. (Figure 2)

CONTROLLER BATTERY BATERY INSTALLATION

• Click the button on the battery cover with a screwdriver to take out the battery cover. (Picture 1)
• Install 3×1.5V AA batteries into the battery compartment according to their polarity (Picture 2)
• Put on the battery cover (Picture 3)

Note: Batteries should be inserted with the correct polarity.

WARNING

• Do not mix different types of batteries.
• Do not mix old and new batteries.
• Install batteries with correct polarity.

CHARGING BATTERIES

• Connect one end of the USB charging cable to the adapter power port, and then connect the other port to the battery charging port. When charging correctly, the USB charging cable indicator is always on.
• The USB charging line indicator is off, indicating that the charging is complete (the charging time is about 50 minutes)

1. AC adapter
   3.7V 800mA

• Do not put the battery in a place with high temperature and heat, such as open fire or electric heating device, otherwise damage or explosion will occur.
• Do not hit or strike hard object surfaces with batteries.
• Do not disassemble the battery.
• Do not immerse the battery in water. The battery should be stored in a dry place.
• Do not leave when charging.
• Do not put the battery on inflammable materials such as blankets for charging.
• Do not charge the battery when it is hot after the aircraft is in operation.
• Please use the original USB charging cable to charge the battery.

READY TO FLY AND CLOSE

TURN ON

Place the aircraft on the horizontal plane, turn on the fuselage power switch, the light flashes and is in standby mode.

Note: the tail of the aircraft is aimed at the operator

OPPOSITE FREQUENCY

Turn the light of the aircraft to the lowest point, and then press the remote control lever to reset the light to the lowest point, and then turn it to the longest point.

HORIZONTAL CALIBRATION

Move the left and right control levers of the remote control at the same time at the angle of 45 ° to the left or 45 ° to the right. The light of the fuselage lashes and turns to be normally on. At the same time, after the buzzer of the remote control “drops”, the horizontal calibration is completed.

TURN ON THE DRONE

Method 1:After the aircraft is unlocked, push the left joystick of the remote control upward to rotate the propeller slowly, and then push the propeller upward again to accelerate rotation and fly off the ground.

Method 2:When the aircraft is at a standstill after frequency matching, press the “one button take-off” button on the remote control. After the aircraft propeller rotates slowly, it will automatically rise to an altitude of about 1.2m and hover.

TURN OFF THE DRONE

Method 1:Push the left joystick of the remote control to the lowest position until the aircraft lands on the ground. Push it for another 3-4 seconds, and then the propeller stops rotating. Press and hold the switch to turn off the aircraft.

Method 2:When the aircraft is in flight, press the “one button down” button, and the aircraft will slowly descend to the ground to wait for the propeller to stop rotating, and then long press the switch to shut down the aircraft.

FLIGHT OPERATION INSTRUCTIONS

Push the accelerator up or down,
the quadcopter flies upward or downward.

Push the accelerator left or right,
the quadcopter turns to left or right.

Push the direction control stick up or down,
the quadcopter flies forward or backward.

Push the direction control stick left or right,
the quadcopter flies to left side or right side.

FINE-TUNING OPERATION INSTRUCTIONS

Forward/Backward fine-tuning

When the quadcopter keeps flying forward / backward, you can adjust it by pressing fine-tuning button down/up.

Sideward fly fine-tuning

When the quadcopter keeps flying to left/ right side, you can adjust it by pressing fine-tuning button right / left.

HIGH AND LOW SPEED SWITCHING

During the flight of the aircraft, press this function key to switch the forward, backward, left and right flight speeds. The Drone is in low gear by default. Press this function key to switch to medium gear, and the buzzer of the remote control sends out two beeps. Press this function key again to switch to high gear, and the buzzer of the remote control sends out three beeps. Press this function again to switch to low gear, and the remote control sends out one beep.

3D EVERSION

Press the roll button for a short time, the buzzer of the remote control will give out a “beep” sound, push the right operating lever, and the aircraft will roll along with the pushing direction. At the same time, the sound will disappear and enter the normal mode.

Note: When the battery is fully charged, the rollover effect is the best. There is no way to roll under the status of low electricity.

HEADLESS MODE INSTRUCTIONS

When taking off, the remote control must be facing the tail of the Drone. After taking off, press the remote control headless mode button to enter headless mode. The light of the fuselage flickers, and the remote control buzzer makes a beep. Then press the button of headless mode to exit headless mode.

Note: When the direction of the remote control changes, you need to recalibrate the headless.

LOW BATTERY MODE

During the flight, the aircraft indicator flashes slowly, and The remote control emits a beep, indicating that the battery is low. Need to end the flight.

OBSTACLE AVOLDANCE MODE

• Press the button to turn on the obstacle avoidance mode, and press again to turn off the obstacle avoidance mode. Avoid obstacles on 2 sides and retreat in the opposite direction of the obstacle.
• It is recommended to turn on the obstacle avoidance function in an indoor flight environment with a length and width of 6 x 6 meters or more.
  When the UAV turns on the obstacle avoidance mode, the speed will slow down and the fast gear cannot be turned on. Therefore, it is recommended to fly indoors when the obstacle avoidance mode is turned on.

ONE KEY START / LANDING

• After unlocking the aircraft, long press the one button take-off function button of the remote control, and the aircraft will automatically rise to about 1.5 meters and hover.
• When the DRONE is flying at high altitude, long press the one button landing function button of the remote control, the aircraft will slowly land. During the descent process, the aircraft can be controlled by the steering rod and the right operating rod to land to the designated point, and then the propeller will stop rotating.

EMERGENCY STOP

In case of emergency during the flight, press the emergency stop button to stop the aircraft so as not to cause harm.

REMOTE CONTROL PHOTO/VIDEO

• When we short press the photo button on controller, the LED on the backside of drone flash 1 times.
• When we long press the video button on controller, the LED on the backside of drone flash quickly, that means the drone is recording video. Long press again the LED on the backside of drone reminds on, that means the drone stop recording video.

RECTIFICATION PROCEDURES

• The drone has entered into low voltage protection.
• When the power of the remote Control is weak, the power light indicator will blink.

|

• Charge up the drone.
• Change the batteries of the remote control.

The flight response of the drone is not sensitive|

• The power of the remote control is weak.
• There is an interference with the same frequency as that of the remote control.

|

• Change the batteries.
• Change to a place where there is no interference with the same frequency.

The drone is flying towards its side in one direction during hovering|

• The drone is not calibrated level to the ground.

|

• Re-adjust the calibration until the drone is level to the ground. For further details, see on Page 4 for details (Function of horizontal adjustment).

In the headless state, it is biased towards the front direction|

• Many collisions may cause head biasness.

|

• Re-define the front direction. For further details, see on Page 6 for details (Headless Function).

Fixed high instability / up and down movement|

• The drone is not calibrated level to the ground.
• Unstable air pressure under the severe weather condition.
• Violent collision resulting in data disorder of gyroscope.

|

• Re-adjust the calibration until the drone is level to the ground. For further details, see on Page 4 for details (Function of horizontal adjustment).
• Avoid to fly under the severe weather condition.
• Make horizontal adjustment again, see on Page 4 for details(For further details).

FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Cations to this device not explicitly approved by manufacturer could Caution: Any changes or modivoid your authority to operate this equipment.
RF Exposure Information
The device was evaluated to meet general RF exposure requirements. This equipment should be installed and used with a minimum distance of 0 mm between the radiator and your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>