PHILIPS HD9303 Electric Kettle User Manual

PHILIPS HD9303 Electric Kettle

Product Information

Specifications

• Model: HD9303, HD9306
• Boil-dry protection
• Electromagnetic fields (EMF) compliant
• Warranty: 2 years

Important Safety Information

Read this safety leaflet carefully before you use the appliance, and save the user manual for future reference.

• Danger: Be aware of potential risks.
• Warning: Take precautions to avoid hazards.
• Caution: Pay attention to prevent damage or injury.
• Boil-dry Protection: The kettle automatically switches off if there is no water or not enough water in it. Let it cool down before using it again.
• Electromagnetic Fields (EMF): The appliance complies with applicable standards and regulations regarding exposure to electromagnetic fields.

Warranty and Support

Versuni offers a two-year warranty after purchase on this product. The warranty does not cover defects due to incorrect use or poor maintenance. For more information or to invoke the warranty, visit our website www.philips.com/support.

Your Electric Kettle

Congratulations on your purchase! To fully benefit from Philips’ support, register your product at www.philips.com/welcome.

Overview

HD9303

• a. Lid release button
• b. Spout
• c. Power indicator
• d. Base connector
• e. Base
• f. Power cord
• g. Handle
• h. ON/OFF switch
• i. Lid

HD9306

• a. Spout
• b. Power indicator
• c. Base connector
• d. Base
• e. Power cord
• f. ON/OFF switch
• g. Handle
• h. Lid release button
• i. Lid

Product Usage Instructions

Before First Use

1. Remove any stickers from the base or the kettle.
2. Place the base on a dry, stable, and flat surface.
3. To adjust the cord length, wind part of it around the cord storage facility in the bottom of the base.
4. Pass the cord through one of the slots in the base.
5. Rinse the kettle with water.
6. Fill the kettle with water up to the MAX indication and let the water boil once.
7. Pour out the hot water and rinse the kettle once more.

Using the Kettle

1. Press the lid release button.
2. Fill the kettle with the desired amount of water.
3. Close the lid properly.
4. Place the kettle on its base and plug it into the wall socket.
5. For HD9303, set the ON/OFF switch to I to start boiling.
6. The kettle switches off automatically when the water reaches boiling point.
7. Note: Do not touch the hot kettle immediately after boiling.

Cleaning and Descaling

Cleaning:

1. Unplug the kettle and wait until it cools down.
2. Clean the outside of the kettle with a soft cloth moistened with warm water and mild cleaning agent.

Descaling:

1. Fill the kettle with water up to three-quarters of the maximum level and bring it to a boil.
2. After the kettle switches off, add white vinegar (8% acetic acid) to the maximum level.
3. Leave the solution in the kettle overnight.
4. Empty the kettle and rinse the inside thoroughly.
5. Fill the kettle with fresh water and boil it.
6. Empty the kettle and rinse it with fresh water again.
7. Repeat the procedure if there is still some scale in the kettle.

Storage

Store the mains cord by winding it around the reel in the base of the kettle.

Frequently Asked Questions (FAQ)

Q: How long is the warranty for this product?

A: The warranty for this product is two years.

Q: Can I use the kettle without water?

A: No, the kettle is equipped with boil-dry protection and will automatically switch off if there is no water or not enough water in it.

Q: How do I descale the kettle?

A: To descale the kettle, fill it with water and vinegar, let it sit overnight, then rinse it thoroughly.

PHILIPS and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license.
This product has been manufactured by and is sold under the responsibility of Versuni Holding
B.V., and Versuni Holding B.V. is the warrantor in relation to this product.
2023 © Versuni Holding B.V.
3000.087.1504.2 (25/04/2023)

Important

Read this safety leaflet carefully before you use
the appliance, and save the user manual for future
reference.

Danger
The appliance must not be immersed.

Warning

• Check if the voltage indicated on the appliance corresponds to the local mains voltage before you connect the appliance.
• This appliance is intended to be used in household and similar applications such as:
• staff kitchen areas in shops, offices and other working environments;
• farmhouses;
• by clients in hotels, motels and other residential-type environments;
• bed and breakfast type environments.
• Do not use the appliance if the plug, the mains cord, the base or the appliance itself is damaged.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Keep this appliance and its cord out of reach of children aged less than 8 year.
• If the kettle is overfilled, boiling water may be ejected.
• The kettle is only to be used with the stand provided.
• Do not let the mains cord hang over the edge of the table or worktop on which the appliance stands. Excess cord can be stored in or around the base of the appliance.
• Hot water can cause serious burns. Be careful when the kettle contains hot water.
• Never fill the kettle beyond the maximum level indication.
• Do not touch the body of the kettle during and some time after use, as it gets very hot. Always lift the kettle by its handle.
• Do not open the lid while the water is heating up or boiling. Be careful when you open the lid immediately after the water has boiled: the steam coming out of the kettle is very hot.
• Only use the kettle in combination with its original base.
• This rapid-boil kettle can draw up to 10 amps from the power supply in your home. Make sure that the electrical system in your home and the circuit to which the kettle is connected can cope with this level of power consumption.
• Do not let too many other appliances draw power from the same circuit while the kettle is being used.
• WARNING: Make sure to avoid spillage on the power connector to avoid a potential hazard.
• WARNING: Always follow the instructions and use the appliance properly to avoid potential injury.

Caution

• CAUTION: Surface of the heating element is subject to residual heat after use.
• CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
• Always place the base and the kettle on a dry, flat and stable surface.
• As the kettle make of glass, it has to handle carefully and avoid colliding to the water tap during water filling.
• When the kettle is broken or crack, stop to use immediately.
• The kettle is only intended for boiling water. Do not use it to heat up soup or other liquids or jarred, bottled or tinned food.
• Never fill the kettle below the minimum level to prevent the kettle from boiling dry.
• Depending on the hardness of the water in your area, small spots may appear on the heating element of your kettle when you use it. This phenomenon is the result of scale build-up on the heating element and on the inside of the kettle over time. The harder the water,the faster scale builds up. Scale can occur in different colors. Although scale is harmless, too much scale can influence the performance of your kettle. Descale your kettle regularly by following the instructions given in the chapter “Descaling”.
• Some condensation may appear on the base of the kettle. This is perfectly normal and does not mean that the kettle has any defects.

Boil-dry protection
This kettle is equipped with boil-dry protection. This device automatically switches off the kettle if it is accidentally switched on when there is no water or not enough water in it. The on/off switch will move to off position and power-on light off. Let it cool down. The kettle is ready for use again. Electromagnetic fields (EMF) This appliance complies with the applicable standards and regulations regarding exposure to electromagnetic fields.

Warranty and support

Versuni offers a two-year warranty after purchase on this product. This warranty is not valid if a defect is due to incorrect use or poor maintenance. Our warranty does not affect your rights under law as a consumer. For more information or for invoking the warranty, please visit our website www.philips.com/support.

Your electric kettle

Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.

Overview

HD9303

HD9306

Before first use

1. Remove stickers, if any, from the base or the kettle.
2. Place the base on a dry, stable and flat surface.
3. To adjust the length of the cord, wind part of it around the cord storage facility in the bottom of the base.
4. Pass the cord through one of the slots in the base.
5. Rinse the kettle with water.
6. Fill the kettle with water up to the MAX indication and let the water boil once.
7. Pour out the hot water and rinse the kettle once more.

Use the kettle

1. Press the lid release button.
   The lid opens automatically.

2. Fill the kettle with the desired amount of water.

3. Close the lid properly.

4. Place the kettle on its base and put the plug in the wall socket.

5. For HD9303, set the ON/OFF switch to “I” to switch on the kettle; for HD9306, push the ON/OFF switch downwards to do so.
   The power-on light goes on.
   The kettle starts heating up.

6. The kettle switches off automatically when the water boils.
   The power-on light goes out automatically.
   Note
   Make sure the lid is properly closed to prevent the kettle from boiling dry.

Cleaning and Descaling

Note

• Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the kettle.
• Never immerse the kettle or its base in water.

Clean the kettle

1. Unplug the kettle and wait until it cools down.
2. Clean the outside of the kettle with a soft cloth moistened with warm water and some mild cleaning agent.

Descale the kettle
Regular descaling prolongs the life of the kettle.
In case of normal use (up to 5 times a day), the following descaling frequency is recommended:

• Once every 3 months for soft water areas (up to 18dH).
• Once every month for hard water areas (more than 18dH).

1. Fill the kettle with water up to three-quarters of the maximum level and bring the water to the boil.
2. After the kettle has switched off, add white vinegar (8% acetic acid) to the maximum level.
3. Leave the solution in the kettle overnight.
4. Empty the kettle and rinse the inside thoroughly.
5. Fill the kettle with fresh water and boil the water.
6. Empty the kettle and rinse it with fresh water again.
7. Repeat the procedure if there is still some scale in the kettle.

Note

• You can also use an appropriate descaler. In that case, follow the instructions of the descaler.

Storage

Store the mains cord by winding it round the reel in the base of the kettle.

Replacement

If the kettle, the base or the mains cord of the appliance is damaged, take the kettle, the base or the mains cord to a service centre authorised by Philips for repair or replacement to avoid a hazard.

Recycling

Do not throw away the product with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment.
Follow your country’s rules for the separate collection of electrical and electronic products. Correct disposal helps prevent negative consequences for the environment and human health.

Troubleshooting

If your kettle does not function properly or if the kettle quality is insufficient, consult the table below. If you are unable to solve the problem, contact a Philips service center or the Consumer Care Center in your country.

scale in the kettle. Descale the kettle.
There is no water or not enough water in the kettle, and the boil- dry protection is activated. Add more water to the kettle.

The kettle does not work.

| Make sure the plug is properly connected to the power socket.
Make sure the power cord is not damaged.
Make sure the kettle is not boiling dry.

There is unpleasant smell in the water.

| Follow steps 5 and 6 in “Before first use” section. If the problem still exists, add water to the maximum level and pour two spoons of baking soda into the kettle, then boil the water and rinse the kettle.
There is some scale in the water, and the water is turbid.|

The water hardness is high in the area you live. Descale the kettle.

References

• Support Home | Philips
• Product registration | Philips

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>