BERMOODA User Manual
- June 7, 2024
- bermooda
Table of Contents
USER MANUAL
P.S. -WE’RE IN YOUR CORNER
SCAN ME
howdy@bermooda.com Customer Support: RGB
Corner Lamp
or email howdy@bermooda.com
#DREAMTEAM #VIBES #FIVESTARSUPPORT
WE’RE HAPPY TO HELP
SCAN ME
howdy@bermooda.com Customer Support: RGB
Corner Lamp
CUSTOMER SUPPORT:howdy@bermooda.com
PARTS
1. LAMP BASE | 3. LEG #2 | 5. ALLEN WRENCH | 7. REMOTE CONTROL |
---|---|---|---|
2. LEG #1 | 4. SCREW X4 | 6. POWER ADAPTER |
STEP 1
Gently pull the wire cord from the Leg #1
Attach connector to Lamp base
**STEP 2
**
Slide the Legs over the Lamp base until they meat at the lamp’s stem
Gently place the lamp on its side and tighten 2 Screws on to each Leg
STEP 3
Plugin and enjoy the vibes!
REMOTE MANUAL
Simple & Intuitive RGB Remote
To Pair 2+ Lamps to One Remote Press & Hold Yellow
Color until the lamp flashes. To Unpair, Press & Hold Blue on Color Ring
ADVANCED SETTINGS
BASIC FUNCTIONS
| ON/OFF| | Speed+
Speed-
---|---|---|---
| Carousel/Pause
| Color Picking Ring
| Rx Signal| | In Operating Status: Brightness+/-
In Shutdown Status: IC Qty +/-
****| Mode+
Mode-
ADVANCED INSTRUCTIONS
TO PAIR 2+ LAMPS TO ONE RGB REMOTE , TURN ON THE LAMPS THAT YOU WANT TO BE PAIRED TO THIS REMOTE, THEN PRESS & HOLD YELLOW UNTIL WHITE LIGHT FLASHES. FLASHING WHITE LIGHT INDICATES THAT THE OPERATION WAS SUCCESSFUL.
TO UNPAIR THE LAMP(S), MAKE SURE EACH LAMP THAT YOU WANT TO UNPAIR IS IN THE «ON» STATE, THEN PRESS & HOLD BLUE ON THE COLOR RING UNTIL IT FLASHES. ONCE IT FLASHES, THE REMOTE IS SUCCESSFULLY DISCONNECTED FROM EACH OF THE UNITS. FOR ADDITIONAL TROUBLESHOOTING/SUPPORT PLEASE EMAIL HOWDY@BERMOODA.COM