URBAN VITAMIN 10.000MAH Magnetic Fast Charge Powerbank User Manual
- June 15, 2024
- URBAN VITAMIN
Table of Contents
URBAN VITAMIN 10.000MAH Magnetic Fast Charge Powerbank
Product Information
Specifications
- Battery capacity: 10,000mAh/3.85V/38.5Wh
- Type-C Input: 5V/3A, 9V/2.2A, 12V/1.67A
- Type-C Output: 5V/3A, 9V/2.2A, 12V/1.67A
- Wireless Output: 5W, 7.5W, 10W, 15W
Product Information
The Compton 10,000mAh Magnetic Fast Charge Powerbank is a portable charger
that offers fast charging capabilities and wireless charging functionality. It
features a Type-C In-/output port, an On button, an LED indicator, and a
wireless charging area.
Product Usage Instructions
Charging the Powerbank
- Ensure that the powerbank is fully charged before using it for the first time.
- Connect the included Type-C cable to the Type-C input port of the powerbank.
- Connect the other end of the cable to a compatible power source, such as a power adapter or a computer.
- The LED indicator will light up to show that the powerbank is charging.
- Once the powerbank is fully charged, the LED indicator will turn off.
Using the Powerbank for Wired Charging
- Connect your device to the powerbank using a compatible charging cable.
- Press the On button on the powerbank to initiate the charging process.
- The LED indicator will show the remaining battery level of the powerbank.
- Once your device is fully charged, disconnect it from the powerbank.
Using the Powerbank for Wireless Charging
- Place your wireless charging compatible device on the wireless charging area of the powerbank.
- Ensure that your device is properly aligned with the wireless charging area.
- The powerbank will automatically detect your device and initiate the wireless charging process.
- The LED indicator will show the remaining battery level of the powerbank.
- Once your device is fully charged, remove it from the powerbank.
Important Safety Information
It is important to only use the included accessories or certified and
tested accessories to charge the powerbank. Using third-party accessories can
compromise the safety of the powerbank. Unsafe cables or chargers can also
affect the safety of the powerbank.
Tips for Optimal Charging Experience
- For a better charging experience, it is recommended to use a power adapter with a power output above 20W.
- To ensure a more accurate display of the power level, it is recommended to perform two full charge/discharge cycles when using the powerbank for the first time.
Frequently Asked Questions
-
Q: Can I use third-party accessories to charge the powerbank?
A: It is not recommended to use third-party accessories to charge the powerbank as it can compromise its safety. Please use only the included accessories or certified and tested accessories. -
Q: Can I use the power bank’s wireless charging feature with non-wireless charging compatible devices?
A: Yes, the powerbank is compatible with other devices, but the magnetic function will not work with non-wireless charging compatible devices. Please ensure that your device supports wireless charging before using this feature. -
Q: How can I ensure a more accurate display of the power level?
A: To ensure a more accurate display of the power level, it is recommended to perform two full charge/discharge cycles when using the powerbank for the first time. -
Q: Can unsafe cables or chargers affect the safety of the power bank?
A: Yes, unsafe cables or chargers can compromise the safety of the powerbank. It is important to use only certified and tested accessories to charge the powerbank.
OVERVIEW
SPECIFICATIONS
- Battery capacity 10.000mAh/3.85V/38.5Wh
- Type-C Input 5V/3A, 9V/2.2A, 12V/1.67A
- Type-C Output 5V/3A, 9V/2.2A, 12V/1.67A
- Wireless Output 5W, 7.5W, 10W, 15W
CHARGING
By cable:
- Plug in the supplied Type-C cable to your wall charger. The USB connector goes to your charger, the Type-C goes to your powerbank.
- When fully charged disconnect the powerbank and it’s ready to use.
Imporant: Only use included accessories or certified and tested accessories to charge the powerbank. Using third-party accessories can influence the item’s safety.
TO CHARGE YOUR MOBILE DEVICE USING THE POWERBANK
- By cable:
- Plug your cable into the USB port on the power bank, the other end goes into your device.
- The power bank will take approximately two hours to charge your mobile device to 95%.
- After you have charged your device, recharge the power bank before using it again.
- Wireless:
- Make sure your phone is compatible for wireless charging.
- Switch on the powerbank using the on button
- Put your wireless charging enabled device on the wireless charging surface of the powerbank.
- If your device supports MagSafe, the magnets in your iPhone and inside the item will connect which each other when you put the item on the device. This item is also compatible with other items, the magnetic function just won’t work.
For a better charging experience, please use a power adapter above 20W. For a more accurate display of the power level, it is recommended to perform two charge/discharge cycles.
WARNING!
- Do not vigorously shake, hit or throw the product.
- If the power bank is not used for long time, please charge/discharge it once every three months to ensure the service life of the product.
- Some phone cases may block the wireless charging.
- Do not place other materials, like metal objects, magnets, and magnetic stripe cards, between the mobile device and the wireless charger pad.
- Check your mobile device’s battery percentage using the charging icon displayed on the screen of your phone.
- When the mobile device is not placed on the charging surface accurately, your mobile device may not charge properly.
- If you use the wireless charger in areas with weak network coverage, you may lose your network reception.
- Please do not expose this device to moisture or heat sources.
- This is not a toy, not suitable for children under the age of 7.
- Only use included or certified accessories ( cables, chargers) to use the item. Unsafe cables or chargers can influence the safety of the item.
EU Declaration of Conformity
ENGLISHXD Connects B.V. hereby declares that this product complies with the essential requirements and other relevant provisions of Derective 2014/53/EU. The complete Declaration of Conformity can be found at www.xdconnects.com > search on item number.
XD Connects B.V.
Lange Kleiweg 6-28
2288 GK Rijswijk, The Netherlands
1F, iCentrum, Holt Street,
Birmingham, B7 4BP, England
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>