Leica Q2 Traveller Kit Instruction Manual

Leica Q2 Traveller Kit

Specifications

• Type: WLAN
• Frequency band (central frequency): Bluetooth 2402 – 2480 MHz
• Maximum power (dBm e.i.r.p.): 20

Product Information

Dear Customer, We are confident that you will enjoy taking photographs with your new Leica Q2. Please read this manual thoroughly to familiarize yourself with the full scope of functions your camera has to offer.

Before using your camera for the first time, please check that
the accessories supplied are complete.

Please visit the Leica Camera AG website for information on the extensive range of Leica replacement parts/accessories: us.leica- camera.com/Photography/Leica-Q/Technical-Equipment

Only the accessories specified and described in this manual or by Leica Camera AG must be used with the camera (battery, charger, mains plug, mains cable, etc.). These accessories should only be used with this product. Third-party accessories may result in malfunctions or damage to the product.

Product Usage Instructions

Foreword

We recommend reading this manual thoroughly to familiarize yourself with the full scope of functions your Leica Q2 camera has to offer.

Scope of Delivery

Before using the camera, please ensure that all the accessories supplied are complete.

Legal Information

Please read the Legal Information section before using your camera for the first time to prevent inadvertent damage to the product and possible injuries.

Regulatory Information

The manufacturing date of your camera can be found on the stickers in the Warranty Card and/or on the packaging. The date format is year/month/day.

Specific regional approvals for this device can be found in the camera menu. Select Camera Information in the main menu and then select Regulatory Information from the submenu.

The CE mark on our products documents compliance with the fundamental requirements of applicable EU directives.

Declaration of Conformity (DoC): Leica Camera AG declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Customers can
download a copy of the original DoC from our DoC server at www.cert.leica- camera.com. For further questions, please contact Leica Camera AG at Am Leitz-Park 5, 35578 Wetzlar, Germany.

Disposal of Electrical and Electronic Equipment

This device contains electric and/or electronic components that must not be disposed of in general household waste. Instead, it should be disposed of at a recycling collection point provided by your local authority. Any standard or rechargeable batteries used in this device must be removed and disposed of separately in accordance with local regulations.

For further information, please contact your local administration, local waste collection company, or the store where you purchased this device.

FAQs

Q: Can I use third-party accessories with my Leica Q2 camera?

A: No, only the accessories specified and described in the manual or by Leica Camera AG must be used with the camera.
Third-party accessories may result in malfunctions or damage to the product.

Q: Where can I find the manufacturing date of my camera?

A: The manufacturing date can be found on the stickers in the Warranty Card and/or on the packaging. The date format is year/month/day.

Q: How do I dispose of the camera and its components?

A: This device contains electric and/or electronic components that must be disposed of at a recycling collection point provided by your local authority. Remove and dispose of any batteries separately in accordance with local regulations.

LEICA Q2
Instruction manual

EN FOREWORD

SCOPE OF DELIVERY

Foreword/Scope of delivery

Dear Customer, We are confident that you will enjoy taking photographs with your new Leica Q2. Please read this manual thoroughly to familiarize yourself with the full scope of functions your camera has to offer.
Your Leica Camera AG

Before using your camera for the first time, please check that the accessories supplied are complete.
­ Leica Q2 with attached lens hood ­ Lithium-ion battery Leica BP-SCL4 ­ Leica BC-SCL4 charger, incl. mains cable (US, EU) ­ Lens hood cap ­ Thread protection ring ­ Accessory shoe cover ­ Carry strap ­ Quick Start Guide ­ CE flyer ­ Creative Cloud flyer ­ Test certificate

Subject to changes in design and production. 2

Replacement parts/accessories

REPLACEMENT PARTS/ACCESSORIES

Please read the chapters “Legal information”, “Safety

EN

remarks”, and “General information” before using your

Please visit the Leica Camera AG website for information on the

camera for the first time. Knowledge of the content will

extensive range of Leica replacement parts/accessories:

prevent inadvertent damage to the product, possible

us.leica-camera.com/Photography/Leica-Q/Technical-Equipment injuries and other risks.

Only the accessories specified and described in this manual or by Leica Camera AG must be used with the camera (battery, charger, mains plug, mains cable, etc.). These accessories should only be used with this product. Third-party accessories may result in malfunctions or damage to the product.

3

EN LEGAL INFORMATION

REGULATORY INFORMATION

Legal information

LEGAL INFORMATION
· Compliance with copyright laws is mandatory. The recording and publication of pre-recorded media like tapes, CDs or other published or broadcast material may breach copyright laws.
· The following applies for all video material created with this camera: This product is governed by the AVC Patent Portfolio license and is meant for private use by a consumer only. The device may furthermore be used for purposes for which the consumer receives no remuneration, e.g. (i) encoding in accordance with the AVC Standard (“AVC Video”) and/or (ii) decoding of AVC Video that was encoded by a consumer in accordance with the AVC Standard within the scope of personal use and/or which the consumer has received from the provider, who is in possession of a license to offer AVC Video. No license is granted or implied for any other use. Any other use, specifically the provision of AVC video in exchange for remuneration, may require a separate license agreement with MPEG LA, L.L.C. Please visit the MPEG LA, L.L.C. website at: www.mpegla.com for more information.

You will find the manufacturing date of your camera on the stickers in the Warranty Card and/or on the packaging. The date format is year/month/day.
Specific regional approvals for this device can be found in the camera menu. Select Camera Information in the main menu Select Regulatory Information from the submenu

4

The CE mark on our products documents compliance with the fundamental requirements of applicable EU directives.

English

Declaration of Conformity (DoC) Hereby, “Leica Camera AG” declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Customers can download a copy of the original DoC to our RE products from our DoC server: www.cert.leica- camera.com In case of further questions, please contact: Leica Camera AG, Am Leitz-Park 5, 35578 Wetzlar, Germany

Product dependent (see technical data)

Type WLAN

Frequency band (central frequency)
2412 ­ 2462 MHz/ 5180 ­ 5240 MHz/ 5260 ­ 5320 MHz/ 5500 ­ 5700 MHz

Maximum power (dBm e.i.r.p.) 20
20

Bluetooth

2402 – 2480 MHz

20

Legal information

DISPOSAL OF ELECTRICAL AND ELEC-

EN

–

TRONIC EQUIPMENT
(Applies within the EU and for other European countries with active waste separation policies.)

This device contains electric and/or electronic components which must not be disposed of in general household waste. Instead, it should be disposed of at a recycling collection point provided by your local authority. This service is free of charge. Any standard or rechargeable batteries used in this device must be removed and disposed of separately in accordance with local regulations.

Further information on the subject is available from your local administration, your local waste collection company, or in the store where you purchased this device.

5

EN IMPORTANT NOTES REGARDING THE USE OF

identifier for a WLAN network). Do not attempt to connect to

Legal information

WLAN/BLUETOOTH® (LEICA FOTOS)

such a network, as this could be construed as unauthorized access.

Please read the important notes on specific functions of Leica

· We recommend disabling the WLAN function while on an

FOTOS on p. 132.

aircraft.

· Appropriate measures must be taken to ensure security and

protect against disruptions to the systems in place where

devices or computer systems are in use that require more

stringent security than WLAN devices.

· Leica Camera AG shall not accept liability for damages arising

from the use of the camera for purposes other than as a WLAN

device.

· It is assumed that the WLAN function will be used in countries

where this camera is sold. There may be a risk of breaching

statutory wireless communication regulations when using the

camera in other countries. Leica Camera AG shall not accept

liability for such breaches.

· Please note that there is a risk of unauthorized third party

interception of wirelessly communicated data. We highly

recommend that you activate encryption in the wireless access

point settings to ensure data safety.

· Avoid using the camera in areas where it can be exposed to

magnetic fields, static electricity or other interferences, e.g.

near a microwave oven. RF transmissions may otherwise not

reach the camera.

· Using the camera near devices like microwave ovens or wireless

phones that use the 2.4 GHz RF band may negatively affect the

performance of both devices.

· Do not attempt to connect to wireless networks you are not

authorized to use.

· The device will automatically search for wireless networks, once

the WLAN function is enabled. A list, including networks you are

not authorized to access, will be displayed (SSID: Network 6

EN 7

Legal information

EN SAFETY REMARKS

· Take care not to soil or scratch the sensor for lens detection in the bayonet. You must similarly prevent direct contact of the

Safety remarks

GENERAL INFORMATION

bayonet with grains of sand or similar particles, as these could cause irreparable damage. This component must only be

· Do not use your camera in the immediate vicinity of devices that generate powerful magnetic, electrostatic or electromagnetic fields (e.g. induction ovens, microwave ovens, television sets or computer screens, video game consoles, cell phones, broadcasting equipment). Their electromagnetic fields can interfere with recordings.
· Strong magnetic fields, e.g. from speakers or large electric motors can damage the stored picture data or disrupt recording.
· Switch off the camera, remove the battery briefly, replace it and switch the camera back on in case of a camera malfunction due to the effects of electromagnetic fields.
· Do not use the camera in the immediate vicinity of radio transmitters or high-voltage power lines. Their electromagnetic fields may interfere with recordings.
· Always store small parts e.g. the accessory shoe cover as follows:
­ out of the reach of children ­ in a safe location, where they will not get lost or stolen
· State-of-the-art electronic components are sensitive to static discharge. You can easily pick up charges of several 10,000 volts by simply walking on synthetic floor coverings. A static discharge can occur when you touch the camera and especially if it is placed on a conductive surface. A static discharge on the camera housing poses no risk for the electronics. Despite built-in safety circuits, you should avoid direct contact with external camera contacts like those in the flash shoe.

cleaned with a dry cloth (in system cameras). · Use a cotton or linen cloth instead of a microfiber cloth from an
optician’s (synthetic) when cleaning the contacts. Make sure to discharge any electrostatic charge by deliberately touching a heating or water pipe (conductive, grounded material). Dirt deposits and oxidation on the contacts can be avoided by storing your camera in a dry location with the lens cap and the flash shoe/viewfinder cap (in system cameras) attached. · Only use accessories specified for this model to prevent faults, short circuits or electric shock. · Do not attempt to remove parts of the housing (covers) yourself. Repairs must be done at authorized service centers only. · Protect the camera against contact with insect sprays and other aggressive chemicals. Petroleum spirit, thinner and alcohol must not be used for cleaning. Some chemicals and liquids can damage the camera housing or the surface finish. · Rubber and plastics are known to expel aggressive chemicals and should therefore not be kept in contact with the camera for extended periods of time. · Prevent any sand or dust or water penetration into the camera, e.g. during snowfall or rain or on the beach. Be extra careful when changing the lens (in system cameras) and when inserting or removing the memory card and rechargeable battery. Sand and dust can damage the camera, the lens, the memory card and the battery. Moisture can cause malfunctions and irreparable damage to the camera and memory card.

8

LENS

· The battery must be removed from the camera or charger and

EN

Safety remarks

· A camera lens can have the effect of a magnifying glass when exposed to direct frontal sunlight. The camera must therefore be protected against extended exposure to direct sunlight.
· Attaching the lens cap and keeping the camera in the shade or ideally in its camera case, will help prevent damage to the interior of the camera.

must be replaced immediately in case of a strange smell, discoloration, deformation, overheating or leakage. Continued use of the battery may result in overheating, which can cause fire and/or explosion! · Never throw batteries into a fire as they may explode. · Keep the battery away from sources of heat in case of leakage or if you smell burning. Leaked fluid can catch fire!

RECHARGEABLE BATTERY

· The use of other chargers not approved by Leica Camera AG can cause damage to the batteries ­ and in extreme cases ­ cause

· Improper use of the batteries or the use of unapproved battery types may result in an explosion!
· Do not expose the rechargeable battery to sunlight, heat, humidity or moisture for prolonged periods of time. Likewise, the batteries must not be placed in a microwave oven or a high-pressure container as this would pose a fire or explosion

serious or life-threatening injuries. · Make sure that the power socket is freely accessible at all times. · Do not attempt to open the battery or the charger. Repairs must
only be carried out by authorized service centers. · Keep batteries out of the reach of children. Batteries can cause
suffocation when swallowed.

hazard.

· Do not under any circumstances charge or insert a damp or wet

battery into the camera!

· A safety valve in the battery ensures that any excess pressure

caused by improper handling is discharged safely. It is neverthe-

less important to dispose of a bloated battery immediately. It

may pose an explosion hazard!

· Keep the battery contacts clean and easily accessible. Although

lithium-ion batteries are secured against short circuits, they

should still be protected against contact with metal objects like

paper clips or jewelry. A short-circuited battery can get very hot

and cause severe burns.

· When a battery is accidentally dropped, make sure to check the

housing and the contacts immediately for any damage. A

damaged battery can damage the camera.

9

EN FIRST AID

MEMORY CARD

Safety remarks

· Battery fluid may cause blindness if it comes into contact with the eyes. Rinse the eyes thoroughly with clean water immediately. Avoid rubbing. Seek medical attention immediately.
· Leaked battery fluid poses an injury hazard when it comes in contact with clothing or skin. Rinse the affected areas thoroughly with clean water.

· Never remove the memory card during a datasave or card reading process. The camera must not be switched off or be subjected to impact or vibrations while working.
· Do not open the cover/remove the memory card or the battery while the status LED is lit, which indicates memory access. Data on the card may otherwise be destroyed and camera malfunctions may occur.
· Do not drop or bend memory cards as this will cause damage

and result in the loss of stored data.

CHARGER

· Do not touch the connections on the reverse of the memory card and keep them clean and dry.

· Using the charger in the vicinity of broadcasting receivers may

· Keep memory cards out of the reach of children. Swallowing a

interfere with reception. Ensure a distance of at least 1 m (3 ft)

memory card may cause suffocation.

between the charger and the receiver.

· When the charger is in use, it may emit a buzzing sound ­ this is normal and not a malfunction.
· Disconnect the charger from the mains when it is not in use, as

SENSOR
Cosmic radiation (e.g. during flights) may cause pixel defects.

it consumes electricity (a very small amount), even if no battery

is inserted.

· Always keep the charger contacts clean, and never short circuit

them.

10

CARRY STRAP

EN

Safety remarks

· Carry straps are usually made of very robust material. You should therefore keep it out of the reach of children. A carry strap is not a toy and poses a strangulation risk.
· Use the carry strap only for its intended purpose on a camera or on binoculars. Any other use poses the risk of injury and may possibly result in damage to the carry strap and is therefore not permitted.
· Carry straps should also not be used for cameras/binoculars during sports activities that pose a risk of entanglement (e.g. when mountain climbing and similar outdoor activities).

Please read the section about “Care/Maintenance” for more information about what to do in case of problems.

11

EN GENERAL INFORMATION

RECHARGEABLE BATTERY

General information

· The battery must have a temperature between + 10°C and +

CAMERA/LENS
· Make a note of the serial numbers of your camera (engraved in the base of the camera housing) and lenses, as this information will be extremely important in case of loss.
· Make sure to always have a lens or the camera bayonet cover attached to prevent dust or other foreign bodies penetrating the camera.
· That is why you should always replace lenses quickly and in a dust-free environment.
· Never store the camera bayonet cover or the lens back cover in a pants pocket, as they will attract lint and dust, which could then be accidentally introduced into the camera.
· Leica releases firmware updates for lenses at irregular intervals. You can download any new firmware version from our homepage and transfer it to your lens. Please read the section “Installing firmware” (p. 130) for more information.

30°C for charging, as the charger will otherwise not switch on or will switch off again. · Lithium-ion batteries can be charged at any time, regardless of their current charge level. A partially charged battery will charge to full capacity faster than a fully discharged one. · The rechargeable batteries come only partly charged ex works and should therefore be charged fully before their first use. · A new battery only reaches its full capacity after it has been fully charged and ­ by using it in the camera ­ depleted 2 to 3 times. This depletion process should be repeated roughly every 25 cycles. · Battery and charger heat up during the charging process. That is normal and not a malfunction. · Rapid flashing of the two LEDs (> 2 Hz) when charging commences indicates a charging error (e.g. maximum charging time exceeded, voltages or temperatures outside permitted ranges or a short circuit). Disconnect the charger from the

mains and remove the battery. Ensure that the above tempera-

LCD PANEL

ture conditions are met and then restart the charging process.

· Condensation may form on the LCD panel if the camera is exposed to great temperature fluctuations. Wipe the screen carefully with a soft, dry cloth.
· The screen image will initially be slightly darker than normal if the camera is very cold when it is switched on. The normal level of brightness will be reached as soon as the LCD panel warms up.

Please contact your dealer, the Leica office in your country or Leica Camera AG if the problem persists. · Rechargeable lithium-ion batteries generate power by way of internal chemical reactions. These reactions are influenced by ambient temperature and humidity. To ensure a maximum service life of the battery, it should not be exposed to extreme temperatures (high or low) for extended periods of time (e.g. in a parked car in the summer or winter).

· However, every battery has a limited service life! After several

hundred charging cycles, this limitation will become evident as

the operating times get significantly shorter.

12

· The replaceable battery supplies power to a backup battery,

MEMORY CARD

EN

General information

which is permanently installed in the camera. This backup battery retains the date and time for up to 2 months. Once the backup battery is depleted, it must be replenished by inserting a charged main battery. The backup battery will recover its full capacity after approx. 60 hours with the rechargeable battery in place. The camera does not have to be switched on for the process. The time and date will have to be set again after a full depletion of the backup battery. · As the battery capacity deteriorates or if using an older battery, warning messages may appear and some functions may be restricted or blocked entirely. · Remove the battery if the camera will not be used for an extended period of time. Make sure to switch the camera off via the main switch before removing the battery. Leaving the battery in the camera will result in a deep discharge after a few weeks. Voltage levels will decrease significantly, as the camera uses a low idle current to maintain settings. · Dispose of damaged batteries in accordance with the relevant regulations at an approved collection point for proper recycling. · The date of manufacture can be found on the battery. The date format is week/year.

· The range of available SD/SDHC/SDXC cards on the market is too extensive for Leica Camera AG to test for compatibility and quality. Generally, any type of memory card may be used without any damage to the camera or memory card. As some “no name” cards may not fully comply with the SD/SDHC/SDXC standards, Leica Camera AG cannot provide any guarantee of function.
· We recommend formatting memory cards from time to time, because fragmented residual data from deleted files may block some of the storage capacity.
· Generally, it is not necessary to format (initialize) memory cards that have been previously used. Formatting will, however, be necessary if you insert an unformatted memory card or a card that was formatted in another device (e.g. a computer) for the first time.
· We recommend backing up your data on a PC, because electromagnetic fields, static electricity and any memory card or camera defects could result in permanent damage or loss of your data.
· SD, SDHC, and SDXC memory cards come with a write protection slider to prevent accidental overwriting. This slider is located on the non-beveled side of the card. All data on the card

is protected when the slider is set to its lower position, marked

LOCK.

13

EN SENSOR

FIRMWARE UPDATE

General information

· Any dust or dirt particles stuck to the glass cover of the sensor may result in noticeable dark stains or specks on the pictures.
DATA
· All data, including personal information, may be changed or deleted due to incorrect or accidental operation, static discharge, accidents, malfunctions, repairs and other measures.
· Please note that Leica Camera AG does not accept liability for direct or consequential damage due to the manipulation or destruction of data and personal information.

Leica is constantly working on developing and optimizing the Leica Q2. As many functions on digital cameras are controlled purely electronically, improvements and extensions to the range of functions may need to be installed on the camera at a later date. Leica releases what are known as firmware updates at irregular intervals. Cameras are always supplied from the factory with the latest firmware. Otherwise you can download it from our website yourself and transfer it to your camera. You will receive a newsletter informing you of the availability of a new firmware update if you register your camera on the Leica Camera homepage. Visit the download section or the “Customer Area” for information about how to register or how to get firmware updates for your Leica Q2. Additionally, you can find information about changes or additions to the manual at: https://owners.leica-camera.com Select menu item “Firmware” (see p. 14) to check whether your camera and lenses are running the latest firmware version.

14

Safety remarks

WARRANTY

EN

In addition to your statutory warranty rights regarding your dealer, you will receive an additional Leica Camera AG product warranty valid from the date of purchase at an authorized Leica retailer. For more information regarding the warranty scope, services and limitations, please visit: warranty.leica- camera.com

Leica Q2 comes with splash water and dust protection. The camera was tested under controlled laboratory conditions and is classes as IP52 in accordance with DIN EN 60529. Please note: The splash water and dust protection coating is not permanent and will diminish over time. The user manual contains instructions on how to clean and dry the camera. The warranty does not cover liquid damage. Any attempt to open the camera casing by an unauthorized retailer or service partner will cause an immediate expiration of the splash water and dust warranty.

15

EN Definition of the various categories of information found in this manual Note Additional information Important Failure to observe the instructions may result in damage to the camera, the accessories or the pictures. Attention Non-compliance may result in personal injury
19

PART DESIGNATIONS

Part Designations

45

7

6

8

3

2

9

1
26 27 28 29

1

14
15 16

10 11
12

17

13

25 24

18

4

20 19

21

23

22

20

CAMERA
I1 Strap lugs I2 Main switch I3 Shutter button I4 Thumbwheel I5 Thumbwheel button I6 Shutter speed setting dial I7 Accessory shoe I8 Microphone I9 Self- timer LED/AF assist light 1 0 Viewfinder eyepiece 1 1 Eye sensor
1 2 Diopter setting wheel 1 3 Zoom/Lock button 1 4 PLAY button 1 5 FN button 1 6 MENU button 1 7 LCD panel 1 8 Status LED 1 9 Directional pad 2 0 Center button 2 1 Speaker 2 2 Battery compartment 2 3 Battery release lever 2 4 Tripod thread 2 5 Memory card slot

LENS “Summilux 28 f/1.7 ASPH.”

EN

Part Designations

26 Alignment point for macro function 27 Macro setting ring 28 Focus ring 29 Aperture setting ring 30 Thread protection ring 31 AF/MF lock release 32 Focus tab

21

EN DISPLAYS
The images displayed on the LCD panel and in the viewfinder are identical.

Displays

PHOTO

WHEN TAKING A PICTURE All displays/values refer to the actual settings

1 23 4 5

67 89

IN PLAYBACK MODE All displays/values refer to the displayed image

1 23 4 5

7 8 20

21

17 16

18 r 1
L J

19

15

14

13

10 11
12

19

17 16 15

14

13

21

22

I1 Focus mode

I2 White balance mode

I3 File format/compression level/resolution

I 4 I 5
I 6 I 7 I 8

– Exposure metering method
Picture mode (Picture sequence) Flash mode/flash exposure compensation Color rendering (Film Style) Stabilization activated

I9 Battery capacity

1 0 Leica FOTOS enabled (Bluetooth) 1 1 Automatic storage of the recording location (Exif data)
(Only while connection to Leica FOTOS is active)

1 2 Remaining number of exposures incl. trend detection via
bar chart = remaining capacity of the inserted memory

card

1 3 Shutter speed 1 4 Light balance 1 5 Exposure value 1 6 ISO Sensitivity 1 7 Exposure mode 1 8 AF Field 1 9 Exposure compensation scale 2 0 Icon for marked picture 2 1 File number of the picture shown

Activated Capture Assistants

EN

Displays

AFs AWB i& (Io}) 0

D I26

27

25

23

STD (1aa D
999-9000
1111 22
23 24

I]] isol D

F2 2 – 3 – 2 -1 ; ., · 2 · 3 l/125s

58

22 Automatic magnification as Focus Assist for manual
focusing (+3x or +6x magnification available)
23 Horizon display 24 Focus Peaking (identification of in sharp edges in the object) 25 Grid lines 26 Histogram 27 Clipping identification of underexposed or overexposed
object sections

23

EN VIDEO

Displays

WHEN TAKING A PICTURE All displays/values refer to the actual settings

28 29 30

35

31

36

33

38 39 40

34

41

42

IN PLAYBACK MODE All displays/values refer to the displayed image

m 28 29 30
AFs AWB

48 31 32 DD 09 BWcill (ull,)
L1010078
44

PLAY

33
‘ -3 -2 -1 0 ·1 ·2 ·3 46

82 45
47

48

49

50

24

2 8 Focus mode

EN

2 9 White balance mode

Displays

3 0 Video resolution

3 1 Color rendering (Video Style)

3 2 Stabilization activated

3 3 Light balance

3 4 Exposure compensation scale

3 5 Microphone recording level

3 6 Battery capacity

3 7 Histogram

3 8 Video mode

3 9 ISO Sensitivity

4 0 Exposure value

4 1 Shutter speed

4 2 Total remaining memory capacity/recording time

4 3 Length of recording

4 4 File name

4 5 Number of pictures on the memory card

4 6 Video editing function

4 7 Exiting video playback

4 8 Elapsed playback time

4 9 Playback status bar

5 0 Playback volume

25

EN PREPARATION
ATTACHING THE CARRY STRAP

PREPARING THE CHARGER

Use the mains cable with the matching regional plug to connect the charger to mains electricity.

Preparation

Attention Once you have attached the carry strap, please make sure that the clips are mounted correctly to prevent the camera from falling.

Note The charger will automatically adapt to local mains voltage.

26

Preparation

CHARGING THE BATTERY
The camera is powered by a lithium-ion battery.
INSERTING THE BATTERY IN THE CHARGER

CHARGE STATUS INDICATORS ON THE CHARGER

EN

.

The status LED indicates a correct charging process.

Slide the battery into the charger with the groove facing up until the contacts meet
Press down on the battery until you can hear and feel it clicking into place
Ensure that the battery is fully inserted into the charger
REMOVING THE BATTERY FROM THE CHARGER
Tilt the battery up and lift it out at an angle

Display

Charge status

CHARGE flashes green battery is charging

80% lights up orange 80%

CHARGE continuous 100% green light

Charge time*
approx. 2 h approx. 3½ h

Disconnect the charger from mains electricity when the charging process is complete. There is no risk of overcharging.

• for a completely discharged battery 27

Preparation

EN INSERTING/REMOVING THE BATTERY
Ensure that the camera is switched OFF (see p. 34) INSERTION

REMOVAL
1 2
3

Push the battery into the slot with the groove pointing towards the LCD panel until you hear and feel it clicking into place

Turn the battery release lever · Battery is pushing out slightly.
Press down on the battery lightly · The battery unlocks and pushes out fully.
Removing the battery
Important Removing the battery while the camera is switched on may result in the loss of custom settings or damage to the memory card.

28

CHARGE STATUS INDICATOR ON THE LCD PANEL

INSERTING/REMOVING THE MEMORY CARD

EN

Preparation

You can see the charge level of the battery on the LCD panel if you

press the center button.

AFs ::”” 1,1,1 [,]) D

STD (10,Y [run

I]] ,so400 ,2.8 ., ., ., , ., ., ., 1/125s 245

Display

Charge status

The camera will save exposures to an SD (Secure Digital), SDHC (High Capacity) or SDXC (eXtended Capacity) memory card.
Notes · SD/SDHC/SDXC memory cards are available from various
suppliers in various sizes and with differing read/write speeds. Memory cards with high storage capacities and high read/write speeds offer quick storage and rendering. · Memory cards with a capacity of less than 1GB are not supported. Memory cards with capacities between 1GB and 2GB must be formated before first use. · Check the memory card for correct alignment if you are having difficulties inserting it into the camera.

liiiiCi

approx. 88 – 100%

lfilD

approx. 63 – 87%

IIlD

approx. 47 – 62%

ID

approx. 36 – 46%

D

approx. 26 – 35%

D

approx. 0 – 25%
The battery needs charging or replacing

29

EN

Ensure that the camera is switched OFF (see p. 34)

INSERTION

OPENING THE COVER OVER THE MEMORY CARD SLOT

Preparation

Slide the cover as shown in the illustration until you hear a click · The cover lifts automatically.
CLOSING THE COVER OVER THE MEMORY CARD SLOT

Push the memory card into the slot with the contacts pointing towards the LCD panel until you hear and feel it clicking into place
REMOVAL

Close and hold down the cover Slide the cover as shown in the illustration until it audibly clicks
into place

Push down on the card until you hear a click · The card pushes out slightly.
Remove the memory card

30

Preparation

ATTACHING/REMOVING THE LENS HOOD

ATTACHING

EN

This camera comes with a matching lens hood. It is pre-mounted ex works. The use of the lens hood is recommended to reduce vignetting.

REMOVAL

Unscrew the lens hood in counter-clockwise direction Screw on the thread protection ring

Unscrew the thread protection ring in counter-clockwise direction (Fig, 1)
Screw on the lens hood in clockwise direction to the stop (Fig. 2)
Notes · The lens hood cover supplied will only fit the lens hood and
cannot be used as lens cover on its own. · A matching lens front cap E49 (Order No. 14001) is available as
an optional accessory for use of the camera without a lens hood: https://store .leica-camera.com

31

Preparation

EN DIOPTER SETTINGS
The viewfinder has a diopter setting function with a range between +3 and -4 diopter to allow glasses wearers the use of the camera without eyeglasses (Diopter adjustment).
Push the diopter setting wheel into its groove until you hear an audible click · This unlocks the diopter setting wheel and it pushes out a little.
Look through the viewfinder Turn the diopter setting wheel until you see the image in the
viewfinder and the displays in perfect focus Push the diopter setting wheel back into its groove until it
audibly clicks into place
32

EN 33

Preparation

Camera operation

EN CAMERA OPERATION
OPERATING ELEMENTS MAIN SWITCH
The main switch switches the camera on and off. SWITCHING THE CAMERA ON

SWITCHING THE CAMERA OFF

Notes · Once switched on, the camera will be ready to use after approx.
1 s. · The LED lights up briefly and the displays in the viewfinder
appear.

Note The function Auto Shutdown (see p. 49) deactivates the camera automatically if no operation occurs within a preset time. Use the
main switch to deactivate the camera if this function is Off to
prevent inadvertent exposures and battery discharge when the camera is not in use.

34

SHUTTER BUTTON

Notes

EN

· Press down the shutter button in a smooth motion until you hear

the click of the shutter to prevent camera shake.

· The shutter button remains locked

Camera operation

­ if the memory card inserted and the internal buffer memory

are (temporarily) full.

­ if the battery has exceeded its performance limits (capacity,

temperature, age).

­ if the memory card is write-protected or damaged.

­ if image numbering on the memory card has reached its limit.

­ if the camera prompts for language, date and time settings at

The shutter button works in two stages. 1. Tapping (= Pressing the shutter button to the 1st pressure
point) ­ activates the camera electronics and rangefinder display ­ saves the metered exposure value in aperture priority

first use or after a reset. ­ if the sensor is too hot.
· When the shutter button is released, camera electronics and viewfinder displays remain active for the time set in the main menu item Power Saving.

mode, i.e. the shutter speed calculated by the camera

­ restarts a self-timer delay in progress (activation via app)

­ reverts the camera back to picture mode:

­ if playback mode is set (activating via app using Visoflex)

­ if menu control is active

­ if the camera is in Standby mode

2. Press down fully

­ to take the picture

· The data is then transferred to the memory card.

­ starts a preselected self-timer delay

35

Camera operation

EN SHUTTER SPEED SETTING DIAL

THUMBWHEEL

The shutter speed setting dial has no stop, which means it can be turned in either direction from any position. It will click at each engraved position and for intermediate values. Intermediate positions outside the click positions must not be used. Please read the section “Exposure” (see p. 69) for details about exposure settings.

­ A: Automatic shutter speed control ­ 2000 – 1+: Fixed shutter speeds

­ Menu navigation ­ Exposure compensation value selection ­ Enlarging/reducing viewed pictures
THUMBWHEEL BUTTON

­ Confirming the selection ­ Direct access to menu functions
36

DIRECTIONAL PAD/CENTER BUTTON
u
0
0
0 0 0
DIRECTIONAL PAD ­ Menu navigation ­ Setting selected menu items/functions ­ Scrolling through the picture memory ­ Moving the focal point (Field or Spot AF)
CENTER BUTTON ­ Accessing the status display ­ Accessing the video function ­ Accessing the submenu ­ Applying menu settings ­ Confirming a deletion ­ Display of picture data during review

PLAY BUTTON/FN BUTTON/MENU BUTTON

EN

Camera operation

[PLAYi
G
[MENU] PLAY BUTTON ­ Activation and deactivation of the (continuous) review/playback
mode ­ Return to full-screen display
FN BUTTON ­ Direct access to menu functions
– – ­ Direct access to delete function
MENU BUTTON ­ Accessing the Favorites or Main menu ­ Exiting the currently displayed (sub) menu

37

Camera operation
Cl II Cl
i’I ~ Cl

EN TOUCH SCREEN TOUCH CONTROL
Tap briefly
Touch and hold, drag and drop

Double tap
horizontal/vertical swipe

In picture mode ­ Set the exposure metering field position
(tap the desired location) ­ Changing to video mode (horizontal swipe) ­ Changing to review mode (vertical swipe)
In Playback/Review mode ­ Changing to picture mode (vertical swipe) ­ Scrolling through the picture memory (horizontal swipe) ­ Zooming in/out of viewed pictures (two-finger pinch/spread) ­ Setting an image area for viewfinder live zoom
(double tap)
Note A light touch is enough, do not press down.

Two-finger pinch

Two-finger spread

38

MENU CONTROL
Menu sections: Main menu and Favorites Main Menu:
– – – ­ contains all menu items
Favorites:
-­ your custom list (see p. 44 for details on how to manage this

CONTROL ELEMENTS

The following elements are used for menu control.

0

I 5
4 1111 1111111

14

Camera operation

EN

list)

15

Note

The favorites menu can only be displayed if it has at least one

16

19 20

menu item assigned.

14 PLAY button 15 FN button 16 MENU button

I5 Thumbwheel button I4 Thumbwheel 1 9 Directional pad 2 0 Center button

39

Camera operation

EN STRUCTURE OF THE MENU SCREEN MAIN MENU

51 52

53 54

55

– – 51 Menu section: Main Menu/Favorites
52 Menu item name 53 Setting of the menu item 54 Reference to the submenu 55 Scrollbar: current position in the menu list

SUBMENU

Drive Mode

56

Single

57

iITl Continuous Low Speed

~ Continuous Medium Speed

llEi Continuous High Speed

58

~ Continuous Super Speed

lffil Interval

~ Exposure Bracketing

56 Current menu item 57 Submenu item 58 Reference to further submenus
Note In some cases, an additional scale for value settings or selectable function options is displayed.

40

SHOW MENU PAGES

SHOW SUBMENU

EN

Camera operation

DISPLAY “HOME” SCREEN (INITIAL MENU CONTROL SCREEN)
In picture mode ­ if there are no menu items assigned to the favorites menu:
Press the MENU button 1x · Main Menu appears on screen.
­ if at least one menu item was assigned to the favorites menu:
– Press the MENU button 1x -· The Favorites menu appears.
Getting back to the main menu ­ if the favorites menu consists of one page:
Press the MENU button 1x ­ if the favorites menu consists of 2 pages:
– Press the MENU button 2x
or Select Main Menu (last item in the favorites menu)
In Playback/Review mode Tap the shutter button
· back to picture mode Press the MENU button
· The Home screen is displayed

Favorites Drive Mode Focusing AF Mode [xposure Meter1rg Film Slye U’.’.:ier Pr·ufll~ le1ca F[TOS Man Menu

C
·

Press the center button or Press the directional pad to the right or Press the thumbwheel button

41

EN MENU NAVIGATION

CONFIRM SELECTION

Camera operation

NAVIGATING WITHIN THE MENUS

Press the center button or

Screen by screen navigation
To scroll forward Press the MENU button
· Continuous scrolling will return the main menu to Screen 1 after Screen 5.
· Back to the favorites menu: Press the shutter button Press the MENU button
To scroll backward
Press the directional pad left
Line by line navigation (Function/function option selection) Press the directional pad up/down or

Press the thumbwheel button · The screen image changes back to the active menu item. The set function variant is shown on the right in the relevant menu line.
Note
· No confirmation is needed for the selection of On or Off. An
automatic save is done.
GO BACK ONE STEP Press the directional pad left or Press the MENU button 1x
EXITING THE MENU You can exit the menus and submenus at any time – with/without applying the settings made.

Turn the thumbwheel (to the right = down, to the left = up) · Once the last menu item has been reached scrolling up or

Return to the superordinate menu item Press the directional pad left

down, the display will automatically jump to the previous or

Go to picture mode

next screen.

Press the shutter button

Note · Some menu items can only be accessed under specific

Go to playback mode

circumstances. The text in the relevant line is displayed in gray Press the PLAY button

to signify the existence of a submenu.

42

OPERATING THE KEYBOARD/NUMBER PAD
Rename Profile l

To change the character type (letters/numerals)

EN

Use the directional pad to select the IG key
Press the center button

Camera operation

IAJserll

To enter the selected character

q w e

·~a

d IB

l o F

z X C

1G123

E

y u g h V b n

0 p
k I
mlC –
123
ID v

IA Input line IB Keyboard/Number pad IC “Delete” button (deletion of the respective last value) ID Press “Confirm”
(to apply individual values and the complete settings)
IE Return to previous menu level IF Shift key (toggles between upper and lower case letters) IG Changing the character type

Using button control

Press the center button or Press the thumbwheel button To save
Use the directional pad to select the ID key
Press the center button
Using touch control Press the button of your choice To save
Select button ID
To exit the menu
Select button IE

To move left or right

Press the directional pad left/right

To go up or down

Press the directional pad up/down

To toggle between upper and lower case letters

Use the directional pad to select “Shift” FI
Press the center button
43

EN

USING THE MENU BAR (DIRECT ACCESS)

Camera operation

Using button control Press the directional pad left/right or Turn the thumbwheel
Using touch control Select the desired function or swipe

FAVORITES MENU
Assign you most frequently used menu items to a favorites menu (up to 15 items) for quick and easy access. The available functions are shown in the list on p. 148.

Fav ori t es

Drive Mode

Focusing

AF 1ode

Ex~ sur2

Metering

F1lrr Styl=

User Pref de

Le1ca FOTOS

Man Menu

C
·

44

Camera operation

MANAGE FAVORITES MENU
Select Customize Control in the main menu Select Edit favorites in the submenu
Customize Control Edit Favor,tes F”J 3utton R1Qht Whnl R1JU.nn

Note

EN

· The favorites menu will be deleted completely if all menu items are
set to Off.

Select the desired menu item

Edit Favorites

I Drive Mode

lrterval

Off

f”xrw;urf’ Rr<1r:<f’Lr,J

Ott

Self Tirrer

Off

F CLS1ny

Os

FOCLS Mode

Ott

/i.F Mode

Off

F CLS Ass st

Off

· · Select On or Off · A warning message appears when the favorites menu has reached the maximum of 15 menu items and no further items can be added.

45

Camera operation

EN

DIRECT ACCESS TO MENU FUNCTIONS
You can assign specific menu functions to the following operating elements for extra quick direct access to menu items in recording mode. The available functions are shown in the list on p. 148.

– DYNAMIC DIRECT ACCESS
The two following buttons additionally allow a quick assignment of menu functions from a custom list of items.
­ FN button (factory setting: Self Timer) ­ Thumbwheel button (factory setting: ISO)

I 5

13

4 1111 1111111

Creating the custom list

Select Customize Control in the main menu

Select FN button/Right setting wheel button in the submenu

15

0

Select On or Off for each menu item · You can activate a maximum of 8 menu items for this list.

13 Zoom/Lock button 15 FN button

I5 Thumbwheel button I4 Thumbwheel

Changing the assignment via the custom list Press and hold the FN button/thumbwheel button
· The direct access list you have created will appear on the LCD panel.
· This list can be modified at any time via the menu item Customized Control.
Select the menu item you want by pressing the center button · You will not be prompted to acknowledge your selection. The change is applied immediately.

Accessing the assigned menu function Press the FN button/thumbwheel button briefly
· The submenu appears on the LCD panel. · Settings can be done via key control or using gesture control
on the LCD panel.
46

STATIC DIRECT ACCESS
The two following operating elements can only be assigned one of the preset functions via menu control. A custom list is not available. ­ Zoom/Lock button ­ Thumbwheel
ZOOM/LOCK BUTTON
Factory setting: Digital Zoom Alternatively, you can assign automatic exposure metering and/or
— metering memory lock to the Zoom/Lock button.
Select Customize Control in the main menu Select Zoom/Lock button in the submenu Select Digital Zoom, AEL/AFL, AEL or AFL

THUMBWHEEL
Factory setting: Automatic You can assign the exposure compensation function to the
– thumbwheel permanently. Select Customize Control in the main menu
Select Wheel Assignment in the submenu Select Exp. Comp.
· Exposure compensation will be done automatically if Automatic
-is selected. – The thumbwheel has varying functions depending on the exposure
mode (see p. 70) when it is set to Auto.

– Off · – – P nofunction

Automatic Mode shift

Exp. Comp. Exposure

compensation

Camera operation

EN

Accessing the assigned menu function Press the Zoom/Lock button briefly

A no function S no function

Shutter speed
Exposure compensation

Exposure compensation
Exposure compensation

M no function

Shutter speed

Exposure compensation

Accessing the assigned menu function Turn the thumbwheel to the left/right

47

Camera default settings

EN CAMERA DEFAULT SETTINGS

TIME

– For details on how to navigate in the menus and for inputs see
chapter “Menu control” (p. 39).
· The two menu items Language and Date & Time appear automatically when switching the camera on for the first time, when activating the camera after a factory reset (see p. 128) or after a firmware update.

– – Select Date & Time in the main menu
Select Time Setting in the submenu Select the desired display format
(12 Hours, 24 Hours) Set the time
· (Select am or pm for the 12-hour format)

MENU LANGUAGE
Factory setting: English
-Available menu languages: German, French, Italian, Spanish,
Portuguese, Russian, Japanese, Korean and Traditional or Simplified Chinese
Select Language in the main menu Select your language

-TIME ZONE
Select Date & Time in the main menu Select Time zone in the submenu Select your time zone/current location
· The Greenwich Mean Time offset is shown on the left of the line
· Major cities in the relevant time zones are shown on the right

· Aside from a few exceptions (button names, short names), the DAYLIGHT SAVING TIME

language will be changed for all information.

Select Date & Time in the main menu

DATE/TIME

Select Daylight Saving Time in the submenu
· Select On or Off.

DATE
You can choose one of 3 options.
Select Date & Time in the main menu Select Date Setting in the submenu Select the desired date format
(Day/Month/Year, Month/Day/Year, Year/Month/Day) Set the date

48

Camera default settings

POWER SAVE MODE (STANDBY MODE)

SUPER SAVE MODE

EN

The camera will switch to the power-saving standby mode after a preset time to extend battery life if this function is activated.

The camera will switch to standby mode within a few seconds to maximize battery capacity.

The device has three power save levels.
­ Super Save mode: Activates device standby mode in seconds
­ Standard Save mode: Activates device standby mode in minutes
­ Automatic LCD panel shutdown (see p. 52)

Select Power Save in the main menu
···- Select Power Save Mode
Select the desired setting (Off, 3 s, 5 s, 10 s)
STANDARD SAVE MODE

Select Power Save in the main menu Select Auto Power Off Select the desired setting
-(Off, 2 min, /5 min, /10 min)

Note The camera can be reactivated from standby mode at any time by pressing the shutter button or by switching the main switch off and on again.

49

Camera default settings

EN LCD PANEL/VIEWFINDER (EVF) SETTINGS
The camera comes equipped with a 3″ liquid crystal color panel, which is protected by a glass cover made of extremely hard and scratch-resistant Gorilla® glass. The following functions can be configured and used individually:
­ Use of the LCD panel and EVF (electronic viewfinder) ­ Eye sensor sensitivity ­ Brightness ­ Color rendering ­ Information display ­ Automatic LCD panel shutdown (standby mode)

– LCD PANEL/EVF USE
You can preset the situations in which EVF and LCD panel should be used. Factory setting: Auto

EVF

LCD panel

Auto The eye sensor in the viewfinder automatically toggles the camera between LCD panel and EVF.
· Pictures · Playback · Menu control

LCD

· Pictures

· Playback

· Menu control

EVF · Pictures · Playback · Menu control

EVF · Pictures

· Playback

Extended

· Menu control

Select Display Settings in the main menu Select EVF-LCD in the submenu Select a setting
-Note
Select EVF if you want to keep the LCD panel switched off (e.g. on
-dark environments).

50

Camera default settings

– EYE SENSOR SENSITIVITY
You can adjust the eye sensor sensitivity to ensure that the changeover functions reliably if you wear eyeglasses. Factory setting: Low
Select Display Settings in the main menu Select Eye Sensor Sensitivity in the submenu Select a setting

BRIGHTNESS

EN

You can adjust brightness for best visibility in various lighting conditions. Brightness is set individually for the LCD panel and the viewfinder. The setting can be selected via key control or touch control.

– LCD PANEL
Select Display Settings in the main menu Select LCD Brightness in the submenu Select the desired brightness of Automatic Confirm selection
EVF Select Display Settings in the main menu Select EVF Brightness in the submenu Look through the viewfinder Select the desired brightness
– Confirm selection
Note An Automatic setting is not available here.
51

EN COLOR RENDERING

INFORMATION DISPLAYS

Camera default settings

Color rendering can also be adjusted. Brightness is set individually for the LCD panel and the viewfinder. The setting can be selected via key control or touch control.

The picture data can be displayed in picture mode and in review mode.
DISPLAY OPTIONS

Select one of the three available display options.
­ No picture data ­ With picture data ­ Video mode with picture data
(available only in recording mode)

Press the center button · The display cycles through the display options.

LCD PANEL
Select Display Settings in the main menu Select LCD Color Adjustment in the submenu Select the desired color setting Confirm selection
EVF
Select Display Settings in the main menu Select EVF Color Adjustment in the submenu Look through the viewfinder Select the desired color setting Confirm selection

AUTOMATIC LCD PANEL SHUTDOWN The LCD panel deactivates automatically to save power
— Select Power Save in the main menu
Select All Displays Auto Off Select the desired setting
(30 s, 1 min, 5 min)

52

ACOUSTIC SIGNALS

AUTOFOCUS CONFIRMATION

EN

Camera default settings

Some functions can be acknowledged with acoustic signals. The following special functions can be configured separately: ­ Electronic shutter sound ­ AF confirmation
ACOUSTIC SIGNALS As a warning signal, e.g. when the user attempts to configure unavailable settings.

A signal sound can be selected for successful AF settings.
— Select Acoustic Signals in the main menu
Select AF Confirmation in the submenu Select On Select Volume in the submenu Select Low/High
SILENT PHOTOGRAPHY When pictures should be taken as quietly as possible.

— Select Acoustic Signals in the main menu
Select Acoustic Signals in the submenu
Select On
Select Volume in the submenu Select Low/High
ELECTRONIC SHUTTER SOUND

Select Acoustic Signals in the main menu Select Electronic Shutter Sound/AF Confirmation/Acoustic Signals in
· the submenu
Select Off for each of these menu items

— Select Acoustic Signals in the main menu
Select Electronic Shutter Sound in the submenu Select On Select Volume in the submenu Select Low/High

53

Basic picture settings

EN

BASIC PICTURE SETTINGS
– PHOTO – – – FILE FORMAT
Choose the JPG format JPG or the standardized raw data format DNG (= digital negative). These can be used individually or simultaneous-
– – ly.
Factory setting: DNG + JPG
– Select Photo File Format in the main menu
Select the desired format
—(DNG, DNG + JPG, JPG)

JPG RESOLUTION

The JPG format setting offers 3 image resolution (number of pixels) options. L-JPG (47 MP), M-JPG (24 MP) and S-JPG (12 MP). You can therefore adjust your settings to the intended use and available memory card capacity. When the Digital Zoom function (see p. 90) is selected, then images will be saved with the following actual resolutions.

28 mm

Digital Zoom 35 mm

Digital Zoom 50 mm

Digital Zoom 75 mm

L-JPG

47 MP

30 MP

15 MP

7 MP

M-JPG

24 MP

15 MP

8 MP

3 MP

S-JPG

12 MP

8 MP

4 MP

2 MP

Select JPG resolution in the submenu

Notes · The standardized DNG (Digital Negative) format is generally used
for the storage of raw data. · When picture data is saved in DNG and in JPG format simultane-
ously, then the camera will use the resolution setting for the JPG
– – format is used for the JPG file (see next section), i.e. the two files – may have differing resolutions.
· The DNG format always uses the highest resolution (47.4 MP), no matter what JPG setting is selected.
– – · The remaining number of pictures shown in the LCD panel will

Select the desired resolution

not necessarily change after every picture taken. A counter

change depends on the subject; very fine image structures

result in higher data quantities, while homogeneous surfaces

mean less data.

54

IMAGE PROPERTIES

COLOR SATURATION

EN

Basic picture settings

One of the many advantages of digital photography is that it is very easy to change key image properties. You can manipulate contrast, sharpness and color saturation before the picture is taken.
– Note
The functions and settings described in this section apply for pictures taken in JPG format only.

The saturation factor in color images determines, whether colors in the picture appear “pale” and pastel-like or “bright” and colorful. While you can’t do anything about weather conditions (clear/ misty), you can change the way an image is rendered.

CONTRAST

The contrast setting, i.e. the difference between light and dark image sections, determines whether an image comes across as “flat” or “brilliant”. Increasing or decreasing this difference impacts on contrast, meaning that some image sections are rendered with more or less light.

SHARPNESS
The impression of sharpness in a picture is largely determined by edge sharpness, i.e. by how slight the transition area between light and dark is at edges in the picture. Expanding or reducing these areas will therefore change the impression of sharpness.

55

Basic picture settings

EN

FILM STYLE

Three pre-configured color profiles are available: Factory setting: Standard

­ STD
– ­ VIV
­ NAT

Standard Vivid Natural

– Select Film Style in the main menu – Select a profile

CUSTOMIZING PHOTO PROFILES For each profile, the settings for contrast, sharpness and saturation can be adjusted individually.
Select Film Style in the main menu Select Film Style Settings in the submenu
– Select a profile from the submenu
Select Contrast/Sharpness/Saturation in the submenu Select a level
—- – (Low, Medium low, Standard, Medium high, High)

MONOCHROME IMAGES
You can choose to save your images in color or monochrome, provided you take the pictures in JPG format. Two pre-configured monochrome profiles are available: ­ BWn Monochrome
-­ BW11111 Monochrome HC
Select Film Style in the main menu Select a profile
CUSTOMIZING PHOTO PROFILES For each profile, the settings for contrast and sharpness can be adjusted individually.
Select Film Style in the main menu Select Film Style Settings in the submenu
– Select a profile from the submenu
Select Contrast/Sharpness in the submenu Select a level
—- – (Low, Medium low, Standard, Medium high, High)

56

— – WORKING COLOR SPACE
Various color spaces can be selected for JPG files depending on the desired purpose. Factory setting: sRGB

sRGB (Standard RGB)

recommended for simple print

Adobe RGB

recommended for sophisticated image editing, e.g. color correction

ECI RGB v2.0

recommended for the professional pre-press stage

IMAGE STABILIZATION
The less favorable the lighting conditions during recording, the
– slower will be the required shutter speeds for correct exposure.
Visual image stabilization is a great tool for preventing out-of-focus images due to blurring. Factory setting: Auto
··- Select Visual Image Stabilization in the main menu
Select a setting (On, Off, Auto)

Basic picture settings

EN

Select Color Management in the main menu Select the desired setting in the submenu

57

Basic picture settings

EN

VIDEO
FILE FORMAT Videos are recorded in MP4 format.
VIDEO RESOLUTION Video can be recorded in the formats C4K (Cinema4K) (4096 x 2160 pixel), +4 (3840 x 2160 pixel) or Full HD (1920 x 1080 pixel). Video can be recorded with different frame rates if 4 K or Full HD is
. – selected.
­ 4k: 24 fps (frames per second), 30 fps
-­ Full HD: 24 fps, 30 fps, 60 fps, 120 fps

MICROPHONE The sensitivity of the integrated microphone can be set. Factory setting: Medium
– Select Video Settings in the main menu
Select Microphone Gain in the submenu Select the desired level
— – (High, Medium, Medium low, Low, Off)
Note The Autofocus function and manual focal length adjustments generate noise that may be picked up in the recording.
WIND NOISE REDUCTION Factory setting: On

You can therefore adjust your settings to the intended use and
— available memory card capacity.
Select Video Resolution in the main menu Select the desired resolution
(C4K/24p, 4K/30p, 4K/24p, Full HD/120p, Full HD/60p, Full HD/30p, Full HD/24p)

Select Video Settings in the main menu Select Wind Noise Reduction in the submenu
· Select On or Off.
VIDEO STABILIZATION The stabilization function helps to reduce blurring for handheld recordings.

Note The max. length for an uninterrupted video recording depends on the selected resolution.

Select Video Settings in the main menu Select Video Stabil. in the submenu
· Select On or Off.

58

IMAGE PROPERTIES
The color space is set to sRGB for video recording. Other image properties can be set for video recordings.

EXPOSURE CONTROL

EN

Apertures, exposure and ISO sensitivity are controlled automatically in video recordings.

Basic picture settings

VIDEO PROFILES

Three pre-configured color profiles are available:

­

Standard

­

Vivid

­

Natural

There are two additional profiles available for monochrome video

recordings:

BWd ­

Monochrome

­ BWdl Monochrome HC

Select Video Style in the main menu Select a video profile
CUSTOMIZING VIDEO PROFILES For each profile, the settings for contrast, sharpness and saturation can be adjusted individually.
—- – Select Video Style in the main menu
Select Video Style Settings in the submenu Select a video profile from the submenu Select Contrast/Sharpness/Saturation in the submenu Select a level
(Low, Medium low, Standard, Medium high, High)

59

EN PICTURE MODE
FOCUSING

– – AUTOFOCUS MODES
The following AF modes are available: AFs and AFc. The currently selected AF mode is shown in the header line.

Picture Mode

Your Leica Q2 allows automatic as well as manual focusing. There are 2 operating modes and 3 metering methods available for AF photography.
AF PHOTOGRAPHY

AFs (single)
Suitable for objects with little or no movement. Focusing is done only once and the setting remains as long as the shutter button is held at the pressure point. That also applies if the AF metering field is pointed at another object.

Press and hold the AF/MF release button Turn the focus ring to the AF position position the AF metering field as needed Tap and hold the shutter button
· Focusing occurs one time (AFs) or continuously (AFc). · Metering was successful: The AF metering field lights up
green. · Metering was unsuccessful: The AF metering field lights up
red. · Alternatively, focus settings and/or exposure settings can be
done and saved via the Zoom/Lock button (“Metering memory lock”, see p. 80)

AFc (continuous)
-Suitable for objects in motion. As long as the shutter button is held
at the 1st pressure point, focusing is continuously adjusted to the object in the AF metering field.
Select Focusing in the main menu Select Focus Mode in the submenu Select a setting

Shutter release

MF PHOTOGRAPHY
Press and hold the AF/MF release button Turn the focus ring away from the AF position Use the focus ring to manually focus on the object Shutter release

Please read the following chapters for more information. 60

AUTOFOCUS METERING METHODS

MULTI-FIELD METERING

EN

Picture Mode

The AF mode offers various metering methods for focusing. A successful focus setting is identified by a green metering field, an unsuccessful one is shown in red.

Several metering fields are detected automatically. This function is particularly useful for snapshots.
SPOT/FIELD METERING

AF Mode : :: Mult 1-F 1eld
=(·l= Spnt
=[l= Field Ll Tracking
::;:;: Face Det:!ct101
——–· SelectFocusinginthemainmenu
Select AF Mode in the submenu Select a setting
(Multi-Field, Spot, Field, Tracking, Face Detection)
Note AF focusing can be unsuccessful: ­ If the distance to the object is too great (macro mode) or too
small ­ If the object is not sufficiently illuminated

Both methods detect only those parts of the object that are within the relevant AF metering fields. The metering fields are indicated by a small frame (field metering) or a cross (spot metering). The very small measuring range for spot metering allows focusing on tiny details of the subject. The slightly larger measuring range in field metering is less critical for focusing, but still permits selective metering. These metering methods can also be used for serial exposures in which the part of the object you want to focus on will always be at the same off-center position in the image. Simply move the AF metering field to another position.
Press the directional pad left or right as needed or
Briefly tap the LCD panel (while Touch AF is activated)
Note In both cases, the metering fields remain at their last positions set, even if the metering method is changed or the camera is switched off.

61

EN

TRACKING

FACE DETECTION

Picture Mode

This field metering variant helps in the capture of moving objects. The focus on the object in the metering field is continuously adjusted, once it is detected.
Aim the metering field at the desired object (by panning the camera shifting the metering field)
Tap and hold the shutter button
— or
Press and hold the Zoom/Lock button (provided the AFL or AEL/AFL is assigned to the button, see p. 80) · The camera focuses on the object.

In this metering method, the Leica Q2 automatically detects faces in the image field. The focus is set automatically on the faces closest to the camera. Multi-field metering is used if no faces are detected.

Pan the camera to the desired cropped section
· The metering field “tracks” the saved object and focus is continuously adjusted.
-Note
· This metering method focuses continuously, even if the AF mode AFs was set.

62

TOUCH AF Touch AF allows a direct placement of the AF metering field. Briefly tap the LCD panel in the desired position or Swipe at the desired position

r ,
L .J

,:·EEEfu j

To return the metering field to the center of the screen

MF ASSIST FUNCTIONS

EN

Picture Mode

AF ASSIST LIGHT
-· · The built-in AF assist light extends the operating range of the AF
system in poor lighting conditions. This light comes on as soon as the shutter button is pressed, provided the function is activated.
Select Focusing in the main menu Select AF Assist Light in the submenu Select On/Off
Note · The AF assist light illuminates an area of up to approx. 5 m. · The AF assist light switches off automatically, once focusing was
successful (AF metering field is green) or has failed (AF metering field is red).

Double tap the LCD panel
– Note
With Spot or Field metering selected, the camera will focus again automatically. If the metering method Tracking is selected, the metering field will remain at the selected position and autofocus commences when the shutter button is tapped.

ACOUSTIC AF CONFIRMATION
A successful focus metering in AF mode can be confirmed with an acoustic signal (see p. 53).

63

EN MANUAL FOCUSING (MF)

MF ASSIST FUNCTIONS

Picture Mode

Focusing manually may in some situations be a better choice than autofocus.
­ the same setting is used for several exposures ­ it would take longer to use the metering memory lock function ­ the setting is to be kept at infinity for landscape pictures ­ poor, i.e. very dark lighting conditions prevent AF operation or
would slow it down

The following assist functions are available in MF mode.

FOCUS PEAKING
This assist function highlights in focus object sections in color. The color can be freely selected.

AFs ~ i,~ rr-I) D

STD (1Dd l!!ffi

Move the focus ring out of the AF position (press and hold the AF/MF lock release)

Turn the focus ring until the desired part of the object is in clear focus

– Select Focusing in the main menu
Select Focus Assist in the submenu Select Focus Peaking Select a setting
-(Off, Red, Green, Blue, White)
Note Focus peaking is based on subject contrast, i.e. differences between light and dark. As a result, high contrast subject parts could be marked, even if they are not completely in focus.

64

ENLARGEMENT

OTHER FUNCTIONS

EN

Picture Mode

-Turning the focus ring will automatically enlarge the image section
in the center, which means the focus quality can be better assessed.
Select Focusing in the main menu Select Focus Assist in the submenu
· Select Auto Magnification
Select On Turn the focus ring
· The image section in the center is enlarged x3 and an indicator showing the magnification factor is shown at the top right of the image.

MACRO FUNCTION The working range for the focus setting can be switched quickly and easily from the standard focus range (30 cm to infinity) to the macro range (17 cm to 30 cm) using the macro setting ring. AF and MF mode are available in both ranges.
112 15 2 J D.~ 1.5 11.7 1

Press the center button · The image section toggles between magnification factors (3x/6x).

Tap the shutter button · The image is no longer enlarged.

Note · The enlargement will automatically return to normal viewing size
about 5 s after the last turn of the focus ring.

Turn the macro setting ring until the alignment point is set to MACRO.
· The distance scales on the focus ring change when the focus ranges change.

65

Picture Mode

EN

– ISO SENSITIVITY
The ISO setting covers a range between ISO 50 and 50000, allowing you to adapt to the relevant situation as required. Factory setting: Auto ISO

150

LIMITING SETTING RANGES
– . – A max. ISO value can be set, which will then limit the automatic
setting range (Max. ISO value). A max. exposure time can also optionally be configured. There are focal length related settings (1/f, 1/(2f), 1/(3f), 1/(4f)) and fixed max. shutter speeds 1/2 and 1/2000 s available for that purpose.

Auto 150

Select Auto ISO Settings in the main menu

15[ 50

Select Maximum ISO, or Min. Shutter Speed in the submenu

150100 150 200

Select the desired value

150 400

150 BOO 150 1600
-150 3200
AUTOMATIC SETTING: Auto ISO
The camera automatically adjusts the sensitivity to ambient brightness and/or to the configured shutter speed/aperture
-settings combination. In conjunction with aperture priority mode,
this function extends the range for automatic exposure control.
Select ISO in the main menu
Select Auto ISO in the submenu

FIXED ISO VALUES
There is more leeway for the use of preferred shutter speed and aperture combinations when setting the exposure manually. You can set priorities within the scope of the automatic setting, e.g. for reasons of picture composition. ISO values between 50 and 50,000 can be selected in 11 increments.
Select ISO in the main menu
Select the desired setting in the submenu
Note When high ISO values are used or the image is edited later, image noise, as well as vertical and horizontal stripes may become visible, particularly in larger, evenly lit areas of the object.

66

WHITE BALANCE

AUTOMATIC CONTROL/FIXED SETTINGS

EN

Picture Mode

In digital photography, white balance ensures neutral color rendering in any light. White balance is based on the camera being preset to render a particular light color as white. Four methods are available:
­ automatic control ­ fixed presets ­ manual setting via metering ­ direct setting of the color temperature

W11te Balance

~ Auto
i!?,, na; light
6 [lnudy
A~ Shadow

:.~: Tungsten

~’° Flash

-/ Gray Care
K Color Tem erature

SSOOK ·

­ Auto: for automatic control, which delivers neutral results in most situations

­ Six fixed presets for most frequently encountered light sources:

DO. -_Daylight Cloudy Shadow

for outdoor pictures in sunlight
for outdoor pictures in cloudy conditions
for outdoor pictures with the main subject in shadow

Tungsten

for indoor pictures with (predominantly) incandescent lamp light

Flash

for flash photography

Select White Balance in the main menu Select a setting

67

Picture Mode

EN MANUAL SETTING VIA METERING ( Gray Card)

DIRECT SETTING OF THE COLOR TEMPERATURE
Values between 2000 and 11,500 K (Kelvin) can be set directly. That gives you a very wide range, which covers virtually all color temperatures occurring in real life and within which you can adapt color rendering to any light color and your personal preferences with incredible detail.

., _
Select White Balance in the main menu Select Gray Card in the submenu Take the picture
· Make sure that the image field contains a white or neutral gray (reference) surface.
· The following will appear on the LCD panel: ­ the image based on automatic white balance ­ a frame in the center of the image
Shutter release
Note A value configured using this method will remain unchanged (i.e. it will be used for all subsequent photographs) until new measurements are taken or one of the other white balance settings is selected.

Color Temperature

Kelvin

500[ , I

c

Select White Balance in the main menu Select Color Temperature in the submenu Select the desired value

68

EXPOSURE

SPOT METERING ­

EN

Picture Mode

EXPOSURE METERING METHODS

Spot metering only captures and analyzes a small area in the middle of the screen image, which is shown in a circle.

Optional methods are spot metering, center-weighted metering and multi-field metering. The line on the left of the light balance will
—— flash in the display if the measuring range is undercut/overshot.
Select Exposure Metering in the main menu Select a metering method
(Spot, Center-Weighted, Multi-Field) · The selected metering method is displayed in the header line
of the screen image.
Note The right shutter speed for correct exposure or the deviation from a correct exposure setting is shown or determined with the help of the screen display.

CENTER-WEIGHTED METERING ­ !QI This method considers the entire image field. The subject elements captured in the center will, however, impact on the calculation of the exposure value more so than areas around the edges.
MULTI-FIELD METERING ­ This metering method is based on the detection of multiple values. These values are used in an algorithm to calculate an exposure value appropriate for a good rendering of the assumed main subject.

69

EN EXPOSURE MODES

Prerequisite for the use of P, A, S and M is the correct setting for

There are four exposure modes available to adjust the rendering of the menu item Scene Modes.

Picture Mode

the object or to create the desired picture composition:
­ Automatic program (IP) ­ Aperture priority mode (IA) ­ Shutter priority mode (IS) ­ Manual setting (IM)

– – Note
Should one of the 13 object and situation-related automatic program variants (see p. 73) be selected instead of P-A-S-M under the menu item Scene Modes, then P-A-S-M will be unavailable. The shutter speed setting dial and the aperture setting ring will in

-The modes are selected via the shutter speed setting dial and the
aperture setting ring. Both have manual setting ranges with locking positions and an A position for automatic operation. As long as P-A-S-M is selected, the four operating modes can be selected using the following setting combinations:

that case have no assigned function.

Setting via the shutter speed setting dial

Setting via the aperture setting ring

PA

A

AA

manual setting

S manual setting

A

M manual setting

manual setting

70

FULLY AUTOMATIC EXPOSURE SETTING

CHANGING THE PRESET SHUTTER SPEED/

EN

APERTURE COMBINATIONS (SHIFT)

Picture Mode

AUTOMATIC PROGRAM ­ P

Changing the preset values using the Shift function combines the

The automatic program mode facilitates fast and fully automatic
-photography. The exposure is controlled by an automatic shutter
speed and aperture setting.
Select Scene Mode in the main menu Select P-A-S-M in the submenu Turn the shutter speed setting dial to the A position Turn the aperture setting wheel to the A position

reliability and speed of fully automatic exposure control with the opportunity to vary the speed/aperture combination selected by the camera at any time to fit in with your own ideas and intentions. The overall exposure, i.e. the brightness of the image, remains unchanged. Faster shutter speeds are a good choice for e.g. sports pictures, while longer speeds will offer more depth of field for e.g. landscape pictures.

Tap and hold the shutter button · The automatically set value pair for aperture setting and shutter speed are displayed.
Shutter release

Turn the thumbwheel to the left/right (left = greater depth of field, right = faster shutter speeds)
· Shifted value pairs are marked with an asterisk next to the IP.

or

Adjusting the automatically set value pair

Notes · The adjustment range is limited to guarantee correct exposure.

· The values will be reset after each shot (and also if exposure

metering is set to deactivate automatically after 12 s) to prevent

unwanted use.

71

EN

SEMI-AUTOMATIC EXPOSURE SETTING

Turn the shutter speed setting dial to the A position

Picture Mode

APERTURE PRIORITY MODE A

Set the exposure value setting via the aperture setting ring Tap and hold the shutter button

The camera electronics will calculate the correct shutter speed automatically and steplessly in the range between 1/40000 s (electronic shutter) and 120 min (max. exposure time; available only for ISO 100/200) when the shutter speed setting dial is in the A position. The calculation includes the set sensitivity, metered brightness and the manually selected aperture. The resulting shutter speed is displayed in half increments for more transparency. The remaining exposure time after shutter release is counted down in seconds on the display for shutter speeds greater than 2 s. The actual calculated and steplessly controlled exposure time may vary from the exposure time displayed in half step increments: The
display shows e.g. 1 6 (the closest value) before shutter release, but
the calculated exposure time is longer, then the countdown after
shutter release can start from 1 9. In extreme lighting conditions,
exposure metering may ­ with all parameters included in the calculation ­ result in shutter speeds outside their working range. The camera will use the stated min. or max. shutter speeds and these values will flash as a warning in the viewfinder if that is the case.

· The automatically set value pair for aperture setting and shutter speed are displayed.
Shutter release
Notes
· The remaining exposure time after shutter release is counted down in seconds on the display for shutter speeds greater than 2 s.
· Image noise becomes apparent when using higher sensitivities, particularly on uniform dark areas. In order to reduce this annoying phenomenon, the camera will take a second “black picture” (taken with the shutter closed) automatically after pictures taken with slow shutter speeds and high ISO values. The noise metered in this parallel picture is then digitally “subtracted” from the data for the actual picture. Where that is the case, the message Noise reduction 12s (time example) will appear on the LCD panel. The doubling of the “exposure” time must be taken into account for long exposure times. The camera must not be switched off during that time.

72

SHUTTER SPEED PRIORITY ­ S

SCENE MODE

EN

Picture Mode

Shutter speed priority mode sets the exposure automatically according to the manually selected shutter speed. It is therefore particularly suitable for pictures of moving objects, where the sharpness of the movement depicted is a critical picture composition element. An appropriately fast shutter speed can help to avoid e.g. unwanted motion blurring and will “freeze” the object. Conversely, an appropriately longer shutter speed can help create a better feeling of motion in the image with targeted “tracer effects”.

13 additional automatic program variants are available under the menu item Scene Modes. All 13 offer automatically controlled shutter speed and aperture for extra easy photography as with the
“normal” automatic program IP and a number of additional
optimized functions for the selected scene type. Factory setting: Fully automatic

Turn the aperture setting wheel to the A position Select the desired shutter speed
­ via the shutter speed setting dial: in full increments ­ via the thumbwheel: Fine tuning in 1/3 increments
Tap and hold the shutter button · The set shutter speed and the automatically calculated exposure value are displayed in white.
Shutter release

Select Scene Mode in the main menu Select the desired setting in the submenu
73

Picture Mode

EN

– – – – ­ Fully automatic: Automatic snapshot function for general use
­ 9 scene modes to match the special requirements of common scene types:
­ Sports, Portrait, Landscape, Night Portrait, Snow/Beach, Fireworks, Candlelight, Sunset, Digiscoping

MINIATURE EFFECT
The effect will make the picture look similar to a closeup photo with its characteristically shallow depth of field. Normal sized objects will appear like a model landscape in the image.

­ 3 additional “special” modes:

The in-focus areas can be limited optionally to a horizontal or

­ Miniature Effect: Limitation of the sharpness range to one
– horizontal or vertical stripe within the image field ­ Panorama: Automatic creation of panorama pictures ­ HDR: automatic combination of multiple pictures taken with
different exposure values

vertical stripe. The width and position of these stripes can be adjusted within the image field.
Select Scene Mode in the main menu Select Miniature Effect in the submenu
· A frame around the area that should be in focus appears in

The following sections offer detailed information about these three

the screen image.

functions.

Notes · The selected program will remain active until a different program
is selected (even after the camera is switched off). · The program shift function and some of the menu items are
unavailable. · The shutter speed setting dial and the aperture setting ring are
without function. · A fixed camera setup on a tripod is recommended for the
Digiscoping setting.

74

Picture Mode

—
· · [Ill,

· !Ill

PANORAMA IMAGES

EN

The Leica Q2 can capture classic horizontal, as well as vertical panorama images.

,

‘

I

Ill

to switch to a vertical frame Press the directional pad up/down to switch to a horizontal frame Press the directional pad left/right Changing the frame position Press the directional pad left or right as needed Changing the frame width Turn the thumbwheel to the left/right
(to the left = smaller, to the right = larger) Notes · The function remains active until another function is selected.

IIIIIIDIII

(f]I ,i6 I00 , 3 5

· . . l/ 125s 9~

75

EN

– Select Scene Mode in the main menu
Select Panorama in the submenu · Auxiliary displays appear on screen

Notes · The less steady the camera is held along the horizontal line, the
smaller will be the overall height of the panorama picture.

Picture Mode

­ a white horizontal/vertical line ­ a progression display indicating the direction
Align the camera in such a way that the desired left/bottom edge of the image is not all the way at the left/bottom of the screen image
Press and hold the shutter button Pan the camera evenly in the indicated direction along the white
auxiliary line
· Pictures are taken automatically and in quick succession. · The image picture is canceled if the camera is panned too
slowly or too fast, or if it is tilted too much and a relevant notification will appear on screen.

· The maximum panning angle is approx. 180°. · Panorama pictures are always taken in automatic program
mode, no matter what the settings for the shutter speed setting
– dial and the aperture setting wheel are.
· Regardless of the current focal length setting, panorama pictures are always taken with 28 mm.
· Panorama pictures are always stored in JPG file format regardless of the current menu setting.
· Panorama pictures cannot be taken with a flash. · The resolution of a panorama picture depends on the direction
of the picture and number of pictures taken. · Sharpness, white balance and exposure for all pictures are set to
the values of the first picture taken in the series. That is why the

Release the shutter button to stop the picture series

final panorama picture may not be in perfect focus or have ideal

· The camera generates a single image from the picture series. Switching between landscape or portrait orientation

brightness if there are significant changes in the distance between camera and object or the ambient light while the picture is taken.

Press the directional pad (up/down = portrait, left/right = landscape)

· Some objects in the picture may appear distorted or there may be visual transitions, because the panorama picture is com-
– posed of a series of individual exposures.
· Panorama pictures cannot be created in the following situations:
­ At very slow shutter speeds (longer than 1/60 s) ­ In conjunction with the time lapse function

76

· Panorama pictures may not be possible for the following object types, under the following exposure conditions or the individual images may not be joined up correctly if:

-HDR
HDR generates a picture in which the “overlay” of three different exposures (-2 EV/0 EV/+2 EV) reproduces an improved image of

EN

Picture Mode

­ Single-color objects or objects with a uniform pattern (sky,

lighter and darker parts of the object, i.e. with less overexposure in

beach, etc.)

the highlights and more definition in the darkest areas.

­ Moving objects (people, pets, vehicles, waves, flowers

Due to the consecutive exposures, this operating mode is best

swaying in the wind, etc.)

suited for immobile objects or those with very little movement, e.g.

­ Objects with changing colors or patterns (e.g. a TV image)

landscapes. We recommend the use of a tripod for HDR pictures

­ Dark locations ­ Objects illuminated by uneven, flickering light sources (e.g.
fluorescent lamps, candlelight, etc.)

because of the slower shutter speeds and in particular in low
-ambient light.
Select Scene Mode in the main menu Select HDR in the submenu

77

EN MANUAL EXPOSURE SETTING

The function of the thumbwheel depends in modes A and M on the

The following manual settings for shutter speed and aperture are a setting of the shutter speed setting dial.

Picture Mode

good choice:

Shutter speed setting dial

Thumbwheel

­ to create a special image mood that can only be achieved with a very specific type of exposure
­ to ensure a perfectly identical exposure for multiple images with different cropped sections
Tap the shutter button Set the desired exposure (using the shutter speed setting dial or
the aperture setting wheel on the lens).

all settings from 2 to 1000 Set to 1+

Fine tuning of the shutter speed in +- 1/3 EV increments, max. 2/3 EV
Longer shutter speeds than 1 s (0.6 s to 120 s in 1/3 EV increments)

· This is done with the help of the mark on the light balance in the footer line of the screen image.
Shutter release · The exposure compensation is done using the scale of the

Set to 2000

Shorter shutter speeds than 1/1000 s (1/1250 s to 1/40000 s in 1/3 EV increments)

light balance:
­ No white scale lines = correct exposure ­ White scale lines to the left/right of the center mark =
under or overexposure by the displayed value or by more than ±3 EV (Exposure Value)

Examples for shutter speed fine tuning settings ­ set shutter speed 1/125 s + move the thumbwheel one click to
the left = 1/100 s ­ set shutter speed 1/500 s + move the thumbwheel two clicks to
the right = 1/800 s

Notes · The shutter speed setting dial must be clicked to one of the
engraved exposure shutter speeds or to one of the intermediate values.

Note This menu item is also accessible via direct assignment, provided it has been relevantly configured (see p. 47).

78

LONG-TERM EXPOSURE ­ T
In this setting, the shutter remains open after shutter release until the shutter button is pressed again (ax. 2 min depending on ISO

· – Notes
· The thumbwheel must have the assignment Off or Automatic (see p. 47)

EN

setting).

· Image noise becomes apparent when using higher sensitivities,

particularly on uniform dark areas. In order to reduce this

Picture Mode

AFs K i1.i ([] D
1111

STD (< <:!& lilD

annoying phenomenon, the camera will take a second “black picture” (taken with the shutter closed) automatically after pictures taken with slow shutter speeds and high ISO values. The

noise metered in this parallel picture is then digitally “subtract-

ed” from the data for the actual picture. In such cases the

message Noise reduction will appear with a relevant time value.

The doubling of the “exposure” time must be taken into account

~mo ,2 s , ,

T s

for long exposure times. The camera must not be switched off during that time.

Set the shutter speed setting dial to +1 Set the aperture setting ring to a fixed value Turn the thumbwheel until the time value in the footer line
changes to IT.
Shutter release

79

EN EXPOSURE CONTROL

METERING MEMORY LOCK

Picture Mode

(FUNCTIONS FOR AUTOMATIC EXPOSURE)
EXPOSURE SIMULATION
With factory settings in place, the brightness of the screen image
in the three automatic exposure modes 1P,1S and IA matches the
relevant exposure settings1. You can now assess and control the effect of the relevant exposure setting on the image before taking the picture.
– This function is also available for the manual exposure setting IM:
Select Exposure Preview in the main menu Select P-A-S (only in automatic, aperture priority and shutter
speed priority mode) or P-A-S-M (also for manual setting)

We often want to arrange important subject elements outside the center of the picture for reasons of picture composition and these elements may sometimes be very bright or very dark. Center-weighted metering and spot metering, however, mainly capture an area in the center of the image and are calibrated to an average gray scale value. In that case, the metering memory lock function
­ in 1P,1S and IA exposure modes, and the AF modes spot/field
metering ­ initially allows a metering of the main object and to store the relevant settings until the final image section is set. With the factory settings in place, both lock functions are done via the shutter button. You can, however, divide the lock functions between the shutter button and the Zoom/Lock button or assign both to the Zoom/Lock button.

Notes · Depending on ambient lighting conditions, the brightness of the
screen image may differ from that of the actual pictures, despite the settings described above. The screen image will appear considerably darker than the ­ correctly exposed ­ picture. That is particularly the case in long-term exposures.

AEL (Auto Exposure Lock) The camera stores the exposure value. The exposure value can be placed on another object independent of the focus setting.
AFL (Auto Focus Lock) The camera stores the focus setting. That makes it easier to focus when exposure values change.

AEL/AFL This option allows the camera to store the exposure value and the focus setting when the Zoom/Lock button is pressed and held.

1 This will apply for as long as the object brightness and the exposure setting
don’t result in excessively low or high brightness values and as long as the
internal exposure setting is not greater than 1/60 s. 80

Menu settings AEL/AFL AFL AEL*

Shutter button no function Exposure Sharpness

Via the shutter button

Zoom/Lock button Exposure and focus Sharpness Exposure

Notes

EN

· A metering memory lock doesn’t make much sense in conjunc-

Picture Mode

tion with multi-field metering, because a targeted capture of an

individual object element will not be possible.

· A change in the aperture setting after the metering memory lock

is set will not result in an adjustment of the shutter speed, i.e.

the end result would be an incorrect exposure. The metering

memory lock is canceled when you release the shutter button.

Aim at the key subject element (using the metering field for spot metering) or alternatively at another detail with average brightness.
Tap and hold the shutter button
· The measurement is taken and saved.

Shutter release

Via the Zoom/Lock button
— Select Customize Control in the main menu
Select Zoom/Lock button in the submenu Select a setting
(AEL/AFL, AEL, AFL) Aim at the object Press and hold the Zoom/Lock button
· The measurement is taken and saved.
Select the final image section Shutter release

• The functions include settings and storage. 81

EN

EXPOSURE COMPENSATION

Select Exposure Compensation in the main menu

Exposure meters are calibrated for a medium gray scale value,

· A scale appears as a submenu item.

Picture Mode

which matches a standard, i.e. average image object. Should the measured image detail not fulfill that requirement, then the a relevant exposure compensation can be effected. Specifically where several pictures are taken in sequence, for example if for a series a slightly lesser or greater exposure is desired for a particular reason, then exposure compensation can be a very useful function: Once set, the setting remains active ­ unlike the metering memory lock ­ until it is reset. Exposure compensation can be set in the range ± 3EV in 1/3 EV increments (EV: Exposure Value).

Set the value on the scale · The set value is displayed in the scale
Notes · This function can be selected for direct access via the thumb-
wheel (see p. 47). That will allow the user to set the values quickly using the thumbwheel. · The following applies for set compensation values, no matter how they were initially set: They remain effective until they are
manually reset to I0, i.e. even if the camera is switched off and
on again in the meantime.

A
IA Set compensation value (marks at I0 = Off)

1 “±X” is a representative placeholder for the relevant value in the positive or
negative range. 82

BRACKETING Many attractive objects are rich in contrast, which means they

—– You can choose from 5 graduations (0.3EV, 0.7EV, 1EV, 2EV, 3EV) and
3 or 5 pictures per series.

EN

Picture Mode

have very bright and very dark areas. The image effect can be dramatically different, depending on which of these areas you choose to align your exposure with. The automatic bracketing function in aperture priority mode allows you to produce several
– alternatives with graduated exposure values and varying shutter
speeds. You can then select the picture you like best or use relevant picture editing software to calculate an image with a particularly broad contrast spectrum (HDR).

Select Picture Series in the main menu
– Select Exposure Bracketing in the submenu
Select the desired number of pictures under Number of Frames in the submenu
Select the desired exposure offset under EV Steps in the submenu
Select the desired Exposure Compensation value in the submenu
· The marked exposure values change positions according to the settings selected. In the case of exposure compensation,

Exposure Bracketing Frames FV Sters

I AI I BC

I: xposuri:; CompcnsiJt1or

IFV +11/HV

the scale also shifts.
All pictures are taken by pressing the shutter button once or several times

Automat ic

On

I D

-3

· 3

11 11111111111111111111111111111111111111111
E

IA Number of pictures IB Exposure difference between the pictures IC Exposure compensation setting ID Light value scale IE Exposure values of the images marked in red.
(The scale will be offset by the relevant value if exposure
compensation is set concurrently.)

83

EN

Notes

OTHER FUNCTIONS

· The following rule applies when using automatic bracketing: With

Picture Mode

automatic ISO sensitivity control enabled, the sensitivity

AUXILIARY DISPLAYS

calculated by the camera automatically for the raw picture will

Four functions are available.

also be applied to all other pictures in a series, i.e. the ISO value

will not change during bracketing. This may mean that the

slowest shutter speed specified under Min. Shutter Speed is

exceeded.

A

· The focus range for automatic bracketing may be limited

D

(depending on the originally set shutter speed). The specified

C

numbers of pictures will be taken regardless. Several pictures in

B

a series may consequently be taken with the same exposure

values.

· The function remains active until another function is selected in the Drive Mode submenu or the camera is switched off and on again. If no other function is selected, another series of pictures is taken each time the shutter button is pressed.

– A Histogram
IB Grid lines (Grid Setup) IC Horizon display (Horizon) ID Clipping

84

HISTOGRAM

GRID LINES

EN

Picture Mode

Histogram represents the brightness distribution in the picture. The horizontal axis shows the graduated values from black (left) through gray to white (right). The vertical axis corresponds to the number of pixels at each brightness level. This type of rendering allows an additional quick and easy assessment of the exposure setting.

The grid divides the image field into 3 x 3 equal fields.

AFs ~ ~
D

([-1) n

STD (cOJ l!D

-· [EJ ,s!IJO , , D , · . 1/250s 590
Select Capture Assistants in the main menu Select Histogram in the submenu Select On
Notes · The histogram is always based on the brightness displayed;
depending on the settings used, it may not represent the final exposure. · In picture mode, the histogram should be regarded as a “trend indicator” and not as a depiction of the exact number of pixels. · The histograms when reviewing and taking a picture may differ slightly from one another. · The histogram function is not available for the simultaneous playback of multiple thumbnails or enlarged pictures.

Select Capture Assistants in the main menu
· Select Grid Setup in the submenu
Select On

85

EN

HORIZON DISPLAY

Two long lines to the left and right of the image center indicate the

The integrated sensors of the camera show its orientation. These

longitudinal axis on screen.

Picture Mode

indicators ensure exact camera orientation along the longitudinal

..and transverse axes of critical objects, e.g. architecture.

AFs ~ ~ [-] D

STD (ioJ IID

­ in zero position = green ­ in tilted position = red

AFs ~ ~
ID

[-] D

STD (10J l!D

-· [f] 1SOlOO F32 3 2 1 CJ. 1 ·3 1/ 50s _590
Select Capture Assistants in the main menu Select Horizon in the submenu Select On

I]:] ~!100 ,3 5

· , , , 1/ 160s 590

The transverse axis is indicated in level position by two green double-lines immediately left and right of the image center. When the camera is tilted, these lines are white and a short red line appears above or below them.

r 1
L J

l]:] ~!100 ,~o

·.. , 1/250s 590

86

CLIPPING
The Clipping display marks very bright or very dark image areas. This function is a very easy and exact tool for checking the correct

– SERIAL EXPOSURES
The camera is set to single shot exposures by default (Single). Serial exposures can also be created to e.g. capture motion sequences at

EN

exposure setting.

various stages.

Picture Mode

Select Picture Series in the main menu Select the desired setting in the submenu
(Continuous Low Speed, Continuous Medium Speed, Continuous High Speed, Continuous Super Speed)

-· Select Capture Assistants in the main menu
Select Clipping in the submenu Select On

Once you have finalized your settings, the camera will take serial exposures as long as you keep the shutter button pressed down fully (and you have sufficient space on your memory card).
Notes
– – · We recommend deactivating the preview review mode (Auto Playback/Review) when using this function. · The specified picture sequence stated in the technical
information refers to a default setting (ISO 200, JPG format L-JPG). The picture sequence may differ in conjunction with other settings or depending on the picture content, White Balance setting and the memory card used. · Regardless of how many pictures were taken in a series, the last picture in the series or the last picture saved on the memory card while the save process is ongoing will be displayed first in both review modes.

87

INTERVAL SHOOTING

Notes

Picture Mode

This camera allows you to capture motion sequences over extended periods of time automatically using the interval shooting function. You must specify the interval between shots and the number of frames in the series.

· A running series of pictures can only be aborted by switching off the camera. The relevant settings remain unchanged, which means that tapping the shutter button again after switching the camera on will restart the series.
· The camera may switch off and on again if “Auto power off” is

SPECIFYING THE NUMBER OF PICTURES
– Select Drive Mode in the main menu
Select Interval in the submenu Select Frames Enter the desired value

set and no other camera operation occurs between the individual shots. · Interval shooting over an extended period of time in a cold location or in a place with high temperature and humidity may result in malfunctions. · Interval shooting will be interrupted or canceled in the following

-SPECIFYING THE INTERVALS BETWEEN SHOTS
Select Drive Mode in the main menu Select Interval in the submenu Select Interval Select the desired interval between shots

situations: ­ if the battery is depleted ­ if the camera is switched off Make sure to check the battery for sufficient charge. · Interrupted or canceled interval shooting an be resumed by switching the camera off, replacing the battery or memory card

– as needed and then switching the camera back on. The pictures
taken after function interruption will be stored in a separate group. A prompt will be displayed on screen if the camera is switched off and on again while the Interval shooting function is active.

88

· The interval function remains active after a picture series is

SELF-TIMER

EN

Picture Mode

completed, and also after the camera is switched off and on again, until another exposure mode (picture series) is set. · The availability of this function does not mean that the camera is suitable for use as a monitoring device. · Regardless of how many pictures were taken in a series, the last

-The self-timer function allows taking pictures with a preconfigured
time delay. We recommend that the camera is placed on a tripod.
Select Self-timer in the main menu Select Self-timer 2 s/Self-timer 12 s in the submenu

picture in the series or the last picture in the series or the last

Shutter release

picture saved on the memory card while the saving process is

· The remaining time until exposure is counted down on screen.

ongoing will be displayed first in both review modes.

The self-timer LED at the front of the camera counts down the

· The camera may under some circumstances be unable to take

delay time. It flashes slowly during the first 10 s, then fast for

good pictures. That may happen if, for example, focusing was

the last 2 s.

unsuccessful. In that case, the camera will not take a picture

· The self-timer delay time can be canceled at any time by

and the series will continue with the next interval. The message

taping the shutter button; the relevant settings remain intact.

Some frames were dropped appears on screen.

Note

In self-timer mode, the exposure value is set just before the picture

is taken and not when the shutter button is pressed.

89

Picture Mode

EN DIGITAL ZOOM Three cropped section sizes are available in addition to the Summilux 28 f/1.7 ASPH. image section. They are similar to the focal lengths 35 mm, 50 mm and 75 mm.
35 mm

PERMANENT SETTING
Select Digital Zoom in the main menu Select a setting
DIRECT ZOOM CHANGE
Press and hold the Zoom/Lock button · A frame appears around the image section on screen, indicating the final image size. · Pressing the Zoom/Lock button will toggle the display between 28 mm (full screen), 35 mm, 50 mm and 75 mm. · The selected increment will remain set until the next change.

50 mm

75 mm

90

Notes

ELECTRONIC SHUTTER

EN

Picture Mode

· The relevant setting must be selected via the menu if the Zoom/ Lock button has a different function assigned (direct access, see p. 46).
· The desired cropped section is displayed for DNG recordings, but the entire 28 mm image field will be saved. That will allow a

The Leica Q2 comes equipped with a mechanical shutter and a purely electronic shutter function. The electronic shutter expands the available shutter area and functions completely noiseless, which may be important in some work environments.

later editing of the full image. · Only an enlarged cropped section will be displayed and stored
for JPG images. A higher zoom value means a lower resolution as shown in the following table. Cropped sections can also be created using editing software.

L-JPG M-JPG

28 mm
47 MP 24 MP

Digital Zoom 35 mm 30 MP 15 MP

Digital Zoom 50 mm 15 MP 8 MP

Digital Zoom 75 mm 7 MP 3 MP

Select Electronic Shutter in the main menu

Select the desired setting in the submenu

Off
·Always On
–Extended

Only the mechanical shutter is used. Focus range 120 s to 1/2000 s.
Only the electronic shutter function is used. Focus range 1/2500 s to 1/40000 s.
You can add in the electronic shutter functions if you need faster shutter speeds than can be

S-JPG

12 MP

8 MP

4 MP

2 MP

achieved with the mechanical shutter. Focus range 120 s to 1/2000 s + 1/2500 s to 1/40000 s.

91

EN FLASH PHOTOGRAPHY

ATTACHING THE FLASH UNIT

Picture Mode

The camera determines the necessary flash intensity by firing one or more pre- flashes before taking the actual picture. The main flash fires immediately after, i.e. during exposure
COMPATIBLE FLASH UNITS
The following flash units offer a TTL flash metering function and ­ depending on the model ­ a varying number of the functions described in this manual: ­ Leica system flash units like the SF 40 and SF 60 ­ Other commercially available flash units with a standard flash
foot and positive center contact1 (fired via the center/X contact). ­ Studio flash units (fired via synchronization cable)

Switch off the camera and flash unit Pull off the accessory shoe cover and store it in a safe place Slide the foot of the flash unit all the way into the accessory
shoe and use the clamping nut (where available) to secure it against accidental movement · Movement inside the accessory shoe can interrupt required
contacts and therefore cause malfunctions.
DETACHING THE FLASH UNIT
Switch off the camera and flash unit Detaching the flash unit Replace the accessory shoe cover
Note · The accessory shoe cover should always be attached when no
accessory is used.

1Activate the Flash setting if you will be using flash units that are not directly compatible with the camera and will therefore not automatically adjust the white balance of the camera.
92

FLASH EXPOSURE METERING (TTL METERING)

SETTINGS ON THE FLASH UNIT

EN

Picture Mode

The camera offers a fully automated, camera-controlled flash mode in conjunction with system-compatible flash units (see p. 92) and for the auto modes aperture priority and manual setting. In aperture priority mode and with manual setting, the camera also allows the use of additional flash techniques like flash synchronization and firing with slower shutter speeds than the sync time 1/180 s, which may be interesting in terms of picture composition. These functions are set on the camera via the menu (please read the next sections for more information). The camera additionally communicates the sensitivity setting to the flash unit. The flash unit can use this information to automatically adjust its range data, provided the device comes with these displays and the aperture setting selected on the lens is also entered manually on the flash unit. The ISO sensitivity setting cannot be altered via the flash unit on system-compatible units, because the information is received from the camera.

Operating mode

TTL Automatic camera control

A

Aperture priority

M

The flash exposure must be set to an output level to

match the aperture and shutter speed settings

determined by the camera.

Note Please read the relevant instructions provided with third party flash units regarding their various operating modes.

93

EN FLASH MODES Select one of the three available operating modes.

AUTOMATIC FLASH ACTIVATION AT SLOWER SHUTTER SPEEDS (LONG-TERM SYNCHRONIZATION)

Picture Mode

­ Automatic ­ Manual ­ Long-term exposure

This mode ensures appropriately exposed, brighter dark backgrounds and bright foreground. The shutter speed is not extended beyond 1/30 s in the other flash

AUTOMATIC FLASH ACTIVATION

modes to minimize the risk of blurring. This may mean, however, that pictures with flash exposure can end up with objects in the

That is the default flash mode. The flash unit will fire automatically if poor lighting conditions would mean slower shutter speeds, which could result in blurred images.

background not illuminated by the flash and therefore being underexposed. In this mode, slower shutter speeds (up to 30 s) are permitted to avoid this effect.

MANUAL FLASH ACTIVATION

This mode is suitable for backlit pictures in which the main subject does not fill the entire frame and is in shadow, or in situations where a fill-in flash will moderate sharp contrasts (e.g. in direct sunlight). The flash will fire each time a picture is taken, regardless of prevailing lighting conditions. The flash intensity depends on the metered ambient brightness: in poor light it is the same output as in automatic mode, with output decreasing with increasing brightness. The flash will then work as a fill-in light, e.g. to light up dark shadows in the foreground or backlit objects, and to create more balanced overall lighting.

94

Picture Mode

FLASH CONTROL

A flash is usually fired at the start of exposure (Start of Exp.), right

EN

The settings and functions described in the following sections only apply to settings and functions available in this camera and in system-compatible flash units.

after the first shutter curtain has completely opened the image window. This may result in apparent contradictions, e.g. the picture of a vehicle being overtaken by its own light trail. This camera allows you to synchronize the flash firing with the end of exposure

SYNC POINT
Flash exposures are lit by two light sources:
­ Ambient light ­ Flash
Any subject elements lit primarily by the flash will almost always be rendered in perfect focus by the short burst of light, provided the focus is set correctly. All other subject elements in the same frame lit by ambient light or lit from within will be rendered with varying degrees of sharpness. Whether or not these object elements will be rendered in sharp focus or blurred, as well as the degree of “blurriness” depends on two interdependent factors:
­ the shutter speeds ­ The speed of movement of the subject elements or camera
during recording

(End of Exp.), right before the second shutter curtain closes the image window. The sharp image will in this case be a rendering of the end of the captured motion. This flash technique creates a more natural impression of movement and dynamics in the image. This function is available with all camera and flash unit settings.
Select Flash Settings in the main menu Select Flash firing point in the submenu Select a setting
(Start of Exp., End of Exp.)
Note When using the flash with faster shutter speeds, a difference between the two flash times will be barely discernible or only noticeable for very fast movements.

The longer the shutter speed and the faster the motion, the greater

the difference between the two superimposed partial images.

95

EN FLASH RANGE

FLASH EXPOSURE COMPENSATION

Picture Mode

The usable flash range depends on the aperture and sensitivity values set manually or calculated by the camera. It is important to ensure that the subject is within the relevant flash range for sufficient illumination. A permanent setting to the shortest available shutter speed for flash mode (sync time) may often result in unnecessary underexposure of those subject elements that are not lit sufficiently by the flash. This camera allows the fine tuning of the shutter speed used in flash mode in combination with aperture priority depending on the conditions of the object or your own picture composition ideas.

This function can be used to selectively reduce or enhance flash exposure regardless of ambient light, e.g. to brighten the face of a person in the foreground when taking a picture outdoors in the evening while retaining the same general lighting mood.
Select Flash Settings in the main menu Select Flash Exposure Compensation in the submenu
· The submenu displays a scale with a red setting mark. The
– function is deactivated if the value is set to I0.
Set the desired value · The configured compensation is displayed as ±X EV1 above the scale.

Flash Exp. Compensation

-3 -2 -1 II I II I II I

+l

+2

+3

I I II I II I I

1 Example (Plus or Minus): “IX” stands for the relevant value.
96

Notes

EN

· Flash exposure compensation changes the range of the flash

Picture Mode

unit.

· Once set, the compensation value remains active until it is reset

to ±0, no matter how many pictures are taken or if the camera is
switched off.

· A compensation value configured on the camera will be

overruled when a relevantly equipped flash unit is attached, e.g.

a Leica SF 60 and a compensation value is entered on that flash

unit.

· The menu item Flash Exposure Compensation can only be used in

conjunction with flash units on which the compensation value

cannot be set manually (e.g. Leica SF 26). The settings on the

scale in the camera menu can therefore only be confirmed if a

suitable flash unit is connected and switched on.

· A brighter flash illumination with Plus compensation will require

a greater flash intensity. Flash exposure compensation will

therefore impact on the flash range: A Plus correction will

decrease it, a Minus correction will increase it.

· An exposure compensation set on the camera will only affect

the measurement of ambient light. If a simultaneous TTL flash

exposure metering compensation is desired in flash mode, then

it must be additionally set on the flash unit. (Exception: On the

Leica SF 26, the compensation value must be set on the camera

via menu control.)

97

EN FLASH PHOTOGRAPHY

Notes

Picture Mode

Switch on the flash unit Set the desired guide number control mode (e.g. TTL or GNC =
Guide Number Control) on the flash unit Switching the camera on Tap the shutter button before each flash exposure to activate
exposure metering
· The flash unit may not fire if this step is missed by pressing the shutter button down completely and skipping these settings.

· A flash unit that is not ready to flash may cause incorrect exposures or error messages.
· Studio flash systems may have a very long flash firing duration. It may therefore be advantageous to select a slower shutter speed than 1/180 s when using such a system. The same applies for RF-controlled flash firing for so- called “off-camera” flashes, as the transmission time may cause a delay.
· Serial exposures and automatic bracketing with flash are not available. With the camera set to one of these modes, there will be no flash display on screen even if the flash unit is attached

Set the desired exposure mode, shutter speed and/or aperture

and the flash will not fire.

setting

· The setting (long-term synchronization) is unavailable and

· It is imperative to take note of the shortest flash sync speed,

grayed out if a flash unit is attached that is not system

as it determines whether a “normal” flash or an HSS flash is

compatible.

fired.

· Depending on the setting selected in the Auto ISO Settings menu,

Select Flash Settings in the main menu Select Flash Mode in the submenu Select a setting
· The currently active mode is displayed on screen.

the camera may not support slower shutter speeds, because an increase in ISO sensitivity takes priority. · Use a tripod to prevent blurring at slow shutter speeds. Alternatively, you can select a higher sensitivity.

98

EN 99

Picture Mode

EN VIDEO MODE

Video Mode

START/EXIT VIDEO MODE
This camera is equipped to take pictures and record video. There are two methods for toggling between Picture and Video mode:

Using touch control Photo

Video

Notes · As only part of the sensor area is used in video recordings, the
relevantly effective focal length is increased, which slightly reduces the size of the image sections. · You can record up to 29 minutes of uninterrupted video. · Some menu items are unavailable in Video mode. The text in the relevant line is displayed in gray to signify the existence of a submenu.

Using button control Press the center button repeatedly, until video icons appear
100

START/END VIDEO RECORDING

EN

Video Mode

Press the shutter button · Video recording begins. · The dot flashes red. · Recording time is running.
Press the shutter button again · Video recording ends. · The dot lights in gray.
Note Basic video settings (see p. 57) and Digital Zoom (see p. 90) must be configured before recording.
101

EN PLAYBACK/REVIEW MODE

Using button control

Playback/Review mode

There are two completely independent playback/review functions available: ­ short-term rendering directly after exposure (Preview) ­ normal Review mode, in which the stored recordings can be
viewed and managed for any length of time The switchover between recording and playback/review mode, as well as most other actions can be completed using gesture or key control. Please see p. 38 for more information about the available gestures.
INITIATE/EXIT PLAYBACK/REVIEW MODE

Press the PLAY button
· The picture taken last is displayed first with its relevant settings.
· The following message appears if the inserted memory card does not contain any picture data: No valid image to display.
· The PLAY button function differs, depending on the current camera setting:

Initial situation
Full screen display of a recording

After pressing the PLAY button Recording mode

Using touch control

Recording

Review/Playback

IWWW:!!lll!!lllt,o;nli[Q)6ill····;11,,111m·1m IUWAGWuil

Display of an enlarged cropped Full screen display of the section/or several thumbnails recording

Ii 11.~11-f+i Mi·

w;;

102

Playback/Review mode

SELECTING/SCROLLING THROUGH RECORDINGS DISPLAYS IN PLAYBACK/REVIEW MODE

EN

The recordings are visually arranged in a horizontal reel. When the end of an image series is reached, it automatically jumps back to the first image in the series. All recordings can therefore be reached by scrolling

References

• AmEra.com is For Sale | BrandBucket
• Real Estate and Homes for Sale - ERA
• Leica Account | Leica Camera US
• Warranty conditions | Leica Camera US
• Leica Camera Wetzlar Germany – Official | International
• LSI - Leica Society International
• Leica Order Guide - Leica Camera AG
• club.leica-camera.com
• Leica Account | Leica Camera AU
• Leica Camera Wetzlar Germany – Official | UK

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>