NITECORE MT2A Pro High Performance Rechargeable AA Flashlight User Manual

NITECORE MT2A Pro High Performance Rechargeable AA Flashlight User Manual

Battery Installation / Removal

Warranty Service

All NITECORE® products are warranted for quality. Any DOA / defective product can be exchanged for a replacement through a local distributor/dealer within 15 days of purchase. After that, all defective / malfunctioning NITECORE® products can be repaired free of charge within 60 months from the date of purchase. Beyond 60 months, a limited warranty applies, covering the cost of labor and maintenance, but not the cost of accessories or replacement parts. The warranty will be nullified if

1. the product(s) is/are broken down, reconstructed and/or modified by unauthorized parties;
2. the product(s) is/are damaged due to improper use. (e.g. reversed polarity installation)
3. the product(s) is/are damaged due to battery leakage.
   For the latest information on NITECORE® products and services, please contact a local NITECORE® distributor or send an email to service@nitecore.com

• All images, text and statements specified herein this user manual are for reference purpose only. Should any discrepancy occur between this manual and information specified on www.nitecore.com, Sysmax Innovations Co., Ltd. reserves the rights to interpret and amend the content of this document at any time without prior notice.

Features

• Utilizes a UHi 20 LED with a max output of 1,000 lumens
• Max peak beam intensity of 16,500cd and max throw of 255meters
• An optical system combined with crystal coating and “Precision Digital Optics Technology” (PDOT)
• A two-stage tail switch controls 3 brightness levels
• Powered by a 14100 Li-ion battery while compatible with AA batteries, to provide a runtime up to 20 hours
• Includes a NITECORE 14100 Li-ion battery (NL1416R 1,600mAh) with a built-in USB-C charging port
• Highly efficient constant current circuit provides a stable output
• Incorporated Advanced Temperature Regulation (ATR) module (Patent No. ZL201510534543.6)
• Electronic reverse polarity protection
• Optical lenses with double-sided scratch resistant coating
• Constructed from aero grade aluminum alloy
• HA III military grade hard-anodized finish
• Tail stand capability
• Two-way clip included
• Waterproof and dustproof rating in accordance with IP68 (2 meters submersible)
• Impact resistant to 1 meter

Dimensions

• Length: 142.8mm (5.62″)
• Head Diameter: 19.7mm (0.78″)
• Tube Diameter: 17.2mm (0.68″)
• Tail Diameter: 19.5mm (0.77″)
• Weight: 40g (1.41 oz) (Battery Not Included)

Accessories

NITECORE 14100 Rechargeable Li-ion Battery (NL1416R 1,600mAh), USB-C Charging Cable, Clip, Lanyard, Spare O-ring

Battery Options

| Type| Nominal Voltage| Compatibility
---|---|---|---
Primary AA Lithium Battery| AA| 1.5V| Y(Recommended)
Primary AA Alkaline Battery| AA| 1.5V| Y(Recommended)
Rechargeable AA Battery| AA| 1.2V| Y(Recommended)
Rechargeable Li-ion Battery| 14500| 3.7V| N(Incompatible)

Technical Data

Using the NITECORE NL1416R Li-ion Battery:

Note: The stated data is measured in accordance with the international flashlight testing standards ANSI/PLATO FL 1-2019, using 1 x 14100 Li-ion battery (1,600mAh) under laboratory conditions. The data may vary in real world use due  to different battery usage or environmental conditions.

Using 2 x AA Batteries:

Note: The stated data is measured in accordance with the international flashlight testing standards ANSI/PLATO FL 1-2019, using 2 x AA alkaline batteries under laboratory conditions. The data may vary in real world use due to different battery usage or environmental conditions.

• The HIGH Level cannot be activated when using AA batteries.

Charging the Battery

The included NL1416R rechargeable Li-ion battery is equipped with a USB-C charging port. Please charge the battery before use.

Power Connection: Use the USB cable to connect an external power supply (e.g. a USB adapter or other USB charging devices)to the charging port to begin the charging process. The charging time is approx. 4 hours. (Charged via the 5V/1A adapter)

Charging Indication: During the charging process, the red charging indicator will turn on steadily. When the battery is fully charged, the charging indicator will turn green steadily

Battery Installation / Removal

As illustrated, after unscrewing the battery cap, insert / remove the battery(s) and screw to tighten the battery cap.

Warnings:

1. Make sure the battery(s) are inserted with the positive end facing towards the head. The product will not work if the battery(s) are incorrectly inserted.
2. When the power level is low, please stop using the product and replace or recharge the battery to prevent damage.
3. If the product is stored in a backpack or left unused for an extended period of time, please remove all batteries to prevent accidental activation or battery leakage.

On / Off

On: When the light is off, full press the Tail Switch until a click sound is heard to turn it on
Off: When the light is on, full press the Tail Switch until a click sound is heard to turn it off.

Brightness Levels

When the light is on, half press the Tail Switch to cycle through the following brightness levels: LOW – MID – HIGH. The MT2A Pro has a memory function. When reactivated, it will automatically access the previous memorized brightness level.

Battery Charging / Replacement

The battery should be charged or replaced when the output appears to be dim or the flashlight becomes unresponsive due to low power.

ATR (Advanced Temperature Regulation)

The integrated ATR technology regulates the output of the MT2A Pro according to the working condition and ambient environment to maintain the optimal performance.

Warnings:

1. On HIGH Level (1,000 lumens), the head of the flashlight will generate massive amount of heat. To avoid burns, it is not recommended to run the flashlight on HIGH Level for an extended period.
2. CAUTION! Possible dangerous radiation! Don’t look into the light! May be dangerous for your eyes.
3. DO NOT cover or place objects near the head of the product to prevent accidents.
4. The product will generate massive heat during prolonged operation. Please exercise caution when using it to avoid potential burns.
5. DO NOT use 14500 batteries to avoid damage to the flashlight.
6. Dispose of the device/batteries in accordance with applicable local laws and regulations.

Maintenance

Every 6 months, threads should be wiped with a clean cloth followed by a thin coating of silicon-based lubricant.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>