Mercedes-Benz ALD00001300 Electronic Data Interchange User Guide
- June 15, 2024
- Mercedes-Benz
Table of Contents
Electronic Data
Interchange Manual (EDI)
ALD00001300
Material label
ALD00001300 Electronic Data Interchange
The documents are protected by copyright. Any use beyond the narrow limits of
the copyright law is not permissible without the approval of Mercedes-Benz AG.
Contacts
Mercedes-Benz AG
SC/WT department
Mail: ibl-support@mercedes-benz.com
Phone: +49 (0)30 / 887 215 588
Mercedes-Benz AG
Stuttgart, Germany
www.mercedes-benz.com
Copyright © Mercedes-benz AG. All rights reserved. Any titles from this
document may not be reproduced in any form (by printing, photocopying,
microfilm or any other method) and may not be processed, copied or distributed
using electronic systems without explicit approval from the publisher.
Material label according to VDA 4902, version 4
VDA has developed a standard material label. This document is also recommended
by ODETTE.
New techniques for goods receipt operations have made barcodes particularly
important. Under the package system, the barcode is scanned. A comparison with
the VDA 4913 EDI is run in the background.
The quality of the barcode is crucial.
Special notes on usage
Type of attachment
For occupational safety reasons and also for ease of disposal of old labels,
only use plastic clips or spots of glue.
Gluing over the entire surface is not permitted. This can make plastic
containers unusable. In such cases, we have to pass the recycling, replacement
and repacking costs on to the party causing the problem.
Attachment location, number of material labels See table below.
Any other attachment locations must be agreed on in writing by the supplier
and recipient.
Font size
The unloading point and item number must be shown in characters at least 10 mm
high.
| Load carrier type | Attachment location |
|---|---|
| Wire-mesh rack | Bottom right on broad side of base (1 standard label) |
| Sealed-wall container | Bottom right on broad side of base (1 standard label) |
| Insert rails-type load unit | Bottom right on broad side of base (1 standard |
label)
Load unit with VDA small load carriers| a) Bottom right on broad side of base
(1 standard label)
b) End face (narrow side) in the document pouches/label holders provided on
each small load carriers (1 small label)
Layout specimen for standard label
Sample is not to scale.
Layout sample for small label (for small load carriers)
Sample is not to scale.
Mercedes-Benz AG
Mercedesstr. 137
70327 Stuttgart
Germany
www.mercedes-benz.com
Mercedes-Benz AG
ELECTRONIC DATA INTERCHANGE MANUAL (EDI)
EDITION October 2022
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>