melodySusie Eos 9 LED UV Nail Lamp User Manual

: June 4, 2024
: melodysusie

Table of Contents

Items Included
How to Use
Malfunctions and Solutions
Important Safety Information
Specifications
Warranty and Customer Service
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

Eos 9 LED UV Nail Lamp lim
User Manual

Thank you for choosing MelodySusie! Please read this user guide carefully and keep it in an accessible location as you may refer to it later.

Items Included

1 x Eos 9 LED UV Nail Lamp
1 x AC Power Cord 1 x User Manual

How to Use

Step 1: Connect the power cord to a secure outlet.
Step 2: Put your hands in and the lamp will automatically turn on(30s).
Step 3: To Stop drying, simply remove your hands when drying.
Or Step
4: Choose a preset timer button (the 30s, 60s, or 90s) as needed. The lamp will run until the preset time has elapsed.
Note: Without any operation for 5 minutes, the lamp will begin power saving mode. The digital display is automatically turned off. When pressing the timer button or using the infrared sensor, the lamp can work normally.

| melodySusie Eos 9 LED UV Nail Lamp - 3
---|---

Malfunctions and Solutions

Malfunctions	Reasons	Solutions
The nail lamp does not work well. / The beads do not turn on.	The power
cord’s AC plug is loose or poorly connected.	Reconnect the power cord and

make sure it is properly connected or contact MelodySusie’s customer service team to change the power supply.
The power cord’s AC output is not properly connected to the lamp’s AC outlet.| Make the power cord’s AC output is properly
connected to the lamp’s AC outlet.
The LCD screen has displayed. The countdown is normal. But the LED light beads don’t turn on.| The LED light beads or the lamp’s internal circuit are damaged. Please contact our customer service team for help.
A light bead or a group of light beads don’t tum on. The light bead is damaged.| Please contact MelodySusie’s customer service team to change to the new light beads.
The power cord’s AC plug is not compatible with the outlet.| Please kindly note the plug is a US plug. If you want to use the nail lamp in other countries or areas, please use it with a universal adaptor.
Malfunctions| Reasons| Solutions
---|---|---
The nail lamp does not work well. / The beads do not turn on.| When pressing the button, the lamp doesn’t
doesn’t have any response.| Please check whether the surface of the button has water or dust. Clean the nail lamp with a dry cloth.
The gel nail polish cannot be cured or dried| Insufficient curing time may result in incomplete curing of your gel nail polish. The curing time requirements vary from different gel polish brands and colors.| Please try to extend the curing time appropriately until the nail surface Is completely cured. For best results, avoid moving your hand too much until curing Is complete.
The light on your nail surface is not enough.| Please adjust the angle of your nail surface to face the light straight to ensure sufficient illumination.
Please check whether the light beads of the nail lamp are aging.| Please contact MelodySusie’s customer service team to change to the new light beads.
Use incompatible polish, such as regular nail polish, and nail lacquer.| Please use LED, UV gel nail polish, or use a compatible nail lamp.
The gel polish is a bit tacky after drying.| Please wipe your nail surface with a gentle cleanser or alcohol prep pads.

Important Safety Information

Please be sure to read the following safety instruction to avoid potential hazards that could result in personal injuries or damage to the device.
1. Make sure your outlet supplies the correct power voltage to avoid damage to the lamp.
2. Please do not unplug the power cord when the machine is working to avoid potential damage to the lamp.
3. Do not use the lamp’s top as a nail table, as this can negatively affect the performance.
4. If you don’t use the nail lamp for a long time, please turn off the power switch and store it properly to extend its lifetime.
5. Children under 18 years old should not use this device without parental consent and supervision.
6. Do not disassemble the device. Doing so could be dangerous and result in voiding warranty conditions. If you require any technical support, contact us at
  service@melodysusie.com.
7. If the device or the power cord is damaged, it should be repaired or replaced by MelodySusie or another authorized professional.
8. Please turn off the device and unplug the power cord before cleaning. Use a cloth with neutral detergent to clean the surface of the machine.

Specifications

Input / Output Voltage Range: AC 100-240V/50-60Hz
Beads Number 30
Material: ABS Nail
Lamp Size: L197W210H98mm (7.768.273.86inches)
Nail Lamp Weight: 550g (1.21Ib) Color: White
Email: service©melodysusie.com
Website: www.melodysusie.com

Warranty and Customer Service

MelodySusie offers a 6-month limited warranty on quality-related issues. Please apply for your extra 6-month warranty extension and download the user manual in other languages by registering on www.melodysusie.com if needed.

melodySusie Eos 9 LED UV Nail Lamp - 2