novasina 007634.00 Nlink MR Differential Pressure IP and EC Transmitter User Guide
- June 15, 2024
- Novasina
Table of Contents
novasina 007634.00 Nlink MR Differential Pressure IP and EC Transmitter
Product Information
Specifications
-
Product Name: nlink+ MR differential pressure IP & EC
Transmitter -
Manufacturer: Novasina AG
-
Model Number: Not specified
-
Output: RS 485
-
Power Supply: Not specified
-
Dimensions: Not specified
-
Weight: Not specified
-
Warranty: Not specified
Product Usage Instructions
Step 1: Unboxing and Initial Setup
- Open the package and carefully take out the nlink+ MR dP transmitter.
- Inspect the transmitter for any visible damage or defects.
- Ensure that the power supply and signal cable are included in the package. If not, contact your sales representative.
Step 2: Power and Signal Connection
- Refer to the provided wiring diagram to correctly connect the power supply and signal cables to the transmitter.
- Make sure to follow all safety guidelines and local electrical regulations during the connection process.
- Once the cables are connected, securely fasten them to avoid any accidental disconnection.
Step 3: Tube Connection
- Prepare the tubes that will be used for differential pressure measurement.
- Connect the tubes to the designated ports on the transmitter,ensuring a tight and secure fit.
Step 4: Configuration
- Obtain the nlink-USB cable (Art-No 2601818) and the configuration software nSoft-ACT-T.
- Connect one end of the nlink-USB cable to the transmitter and the other end to a compatible USB port on your computer.
- Launch the nSoft-ACT-T software and follow the instructions provided in the configuration manual (available on the Novasina website).
- Use the software to change the desired settings for your specific application.
- Ensure that the configuration changes are successfully uploaded to the transmitter.
Frequently Asked Questions (FAQ)
Q: Where can I find the instruction manual?
A: The instruction manual can be found on the Novasina website.
Visit www.novasina.ch and navigate to the product page of the nlink+ MR dP
transmitter. You will find the manual available for download.
Q: How can I get in touch with my sales representative for further
information?
A: Contact information for your sales representative can be found on the
Novasina website. Visit www.novasina.ch and navigate to the “Distributor
Contact” section. You will find the necessary contact details there.
Q: Are there any technical specifications that may change?
A: Yes, technical information and other details related to the product
are subject to change without notice. It’s recommended to regularly check the
Novasina website for any updates or changes.
Quick – Guide
nLink+ MR differential pressure
IP & EC Transmitter
Thank you for buying the nlink+ MR dP transmitter.
You obtained a reliable transmitter for differential pressure probes providing
a RS 485 output.
As the transmitters have passed quality assurance testing you can use them out
of the box.
Novasina AG, Neuheimstrasse 12, 8853 Lachen, Switzerland
Telephone +41 55 642 67 67 Fax +41 55 642 67
70,[email protected],
www.novasina.com
Read the instruction manual (available on the website) for detailed instructions and safe handling
Quick Guide
INSTRUCTION
Connect the power supply and signal cable according to the wiring diagram and connect the tubes.
Configuration:
Use nlink-USB cable (Art-No 2601818) and configuration software nSoft-ACT-T to
change these settings anytime.
Technical information and other information subject to change without notice
References
- Novasina AG - water activity measurement and climate data
- Novasina AG - water activity measurement and climate data