novasina nlink Plus AS EC IP and EC Transmitter User Guide
- June 15, 2024
- Novasina
Table of Contents
Quick – Guide
nLink+ AS IP & EC Transmitter
nlink Plus AS EC IP and EC Transmitter
Thank you for buying the nlink+ AS transmitter.
You obtained a reliable transmitter for your nSens probes providing 2 analog
signals for your control system.
As the transmitters have passed quality assurance testing you can use them out
of the box.
Read the instruction manual (available on the website) for detailed
instructions and safe handling
Quick Guide:
nLink+ AS EC: Connect the 3-wire nSens cable to the corresponding terminal
(nBus-P) according to the colour coding.
nLink+ AS IP: The nSens can be connected directly to the transmitter, or use
an extension cable for flexible installation.
Default settings:
| Signal loop | Parameter | Low range | High range |
|---|---|---|---|
| AO1: 4-20mA | Rel. Humidity | 0% | 100% |
| AO2: 4-20mA | Temperature | -20°C | +80°C |
Use nlink-USB cable (Art-No 2601818) and configuration software nSoft-ACT-T to
change these settings anytime.
Technical information and other information subject to change without notice
For further information, please get in touch with your sales representative.
Check our website www.novasina.ch for the
instruction manual, software download and distributor contact information.
Novasina AG, Neuheimstrasse 12, 8853 Lachen, Switzerland
Telephone +41 55 642 67 67 Fax +41 55 642 67 70,
sales@novasina.ch,
www.novasina.com
Dok Nr. 007499.00
References
- Novasina AG - water activity measurement and climate data
- Novasina AG - water activity measurement and climate data
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>