VEVOR QJ8012-18 Rolling Magnetic Sweeper with Wheels Instruction Manual
- June 15, 2024
- VEVOR
Table of Contents
TOUGH TOOLS, HALF PRICE
Magnetic Sweeper
USER MANUAL
QJ8012-18 Rolling Magnetic Sweeper with Wheels
Technical Support and E-Warranty Certificate
www.vevor.com/support
We continue to be committed to provide you tools with competitive price.
“Save Half”, “Half Price” or any other similar expressions used by us only
represents an estimate of savings you might benefit from buying certain tools
with us compared to the major top brands and doses not necessarily mean to
cover all categories of tools offered by us. You are kindly reminded to verify
carefully when you are placing an order with us if you are actually saving
half in comparison with the top major brands.
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact
us:
CustomerService@vevor.com
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our user
manual. The appearance of the product shall be subject to the product you
received. Please forgive us that we won’t inform you again if there are any
technology or software updates on our product.
READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.
This manual provides important information on proper operation & maintenance.
Every effort has been made to ensure the accuracy of this manual. These
instructions are not meant to cover every possible condition and situation
that may occur. We reserve the right to change this product at any time
without prior notice.
IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE, DO NOT
OPERATE THIS PRODUCT!
WARNING
- KEEP AWAY FROMMATERIALS AND COMPONENTS THAT CAN BE DAMAGED BY EXPOSURE TO MAGNETS. INDIVIDUALS WITH PACEMAKER SHOULD CONSULT PHYSICIAN BEFORE USING THIS PRODUCT.
Model and Parameters
| Model | QJ8012-18″ | QJ8012-24″ | QJ8012-36″ |
|---|---|---|---|
| Holds Up to | 45LBS | 50LBS | 55LBS |
| Working Width | 18inch | 24inch | 36inch |
| Extension Handle | support | support | support |
| Quick Release Load Lever | support | support | support |
Assembly and Use
-
ALUMINIUM FRAME
-
CONNECTING PLATE
-
QUICK RELEASE HANDLE
-
EXTENTION HANDLE
-
2PCS WHEELS
-
BOLT&NUT
-
BRUSH
-
Assemble the wheels ⑤ onto the bolt ⑥ using nuts.
-
Assemble the extention handle ④ onto hole of the connecting plate ② with Y-bolt.
Note: Please remove the protective film on the surface of the aluminum housing before use to avoid weakening the magnetic force.
OPERATION
- Adjust the extension handle to the desired height. Roll the Magnetic Sweeper across the desired hard surface area. It can pick up nails, pins, bolts and any other magnetic object.
- Lift the release lever to quickly remove the magnetic force, allowing the adsorbed nails tofall off quickly, easily and conveniently.
Avoid injury by removing sharp nails by hand.
Safety Instructions
WARNING:
- Please do not put it near flammable materials.
- DO NOT SIT, STAND ON THIS ITEM, It is forbidden to carry people at any condition.
- Overload is strictly prohibited.
- Don’t move too fast when passing potholes areas.
- This product is not a toy. Do not allow children to play with or near this item.
- Do not lift while loaded.
- Use as intended only.
- Inspect before every use; do not use if parts are loose or damaged.
Assembly precautions
- Assemble only according to these instructions. Improper assembly can create hazards.
- Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
- Keep assembly area clean and well lit.
- Keep bystanders out of the area during assembly.
- Do not assemble when tired or when under the influence of alcohol, drugs or medication.
- Assemble on a flat, level, hard and smooth surface capable of safely supporting a fully loaded Sweeper.
SAVE THESE INSTRUCTIONS
Troubleshooting Instruction
| Problem | Reasons | Solution |
|---|---|---|
| The wheels is not spinning freely. | Insufficient lubrication. | Add oil to |
lubricate the rotating parts.
The magnetic force drops for a while| the fine iron powder that is adsorbed on
the surface of
alumnium frame| remove the fine iron powder wich A brush
Maintenance
- Avoid prolonged exposure to the sun to avoid aging.
- Avoid the cart from cracking due to violent impact when going uphill and downhill.
Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai
Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia
Imported to USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho
Cucamonga, CA 91730
**** SHUNSHUN GmbH
Romeracker 9 72021,76351
Linkenheim-Hochstetten, Germany
Pooledas Group Ltd
Unit 5 Albert Edward House, The Pavilions Preston, United Kingdom
MADE IN CHINA
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>