PROAKCESS EC-0445 45L bi Energy Hot and Cold Cooler User Manual
- June 15, 2024
- PROAKCESS
Table of Contents
PRO AKCESS EC-0445 45L bi Energy Hot and Cold Cooler
The BLACK ICE electric coolers can be used wherever you need a snack or a cold
drink: camping, boating, parties, barbecues, hiking, etc. +/- 16°C is the
temperature difference your cooler can reach compared with the outside
temperature.
Working by temperature exchange, it allows the option to heat and keep warm
food. 50° is reached in 30 minutes. You can use it all year round! Very
practical, it can be connected to 220V AC for domestic use, or to the 12V DC
cigarette lighter socket in a car or on a boat.
WARNINGS
- Before use, check that the cables, plugs and casings are not damaged. DO NOT use if damaged or worn parts.
- NEVER fill the unit with water or ice.
- DO NOT immerse the unit in water.
- DO NOT put ice packs inside.
- DO NOT use it in the rain.
- DO NOT handle if your hands are wet.
- Use in a dry and ventilated area.
- DO NOT obstruct the airflow to the unit. Ventilation slots must be kept clear to allow the unit to operate properly and to avoid dangerous overheating.
- DO NOT place the appliance in direct sunlight or in an enclosed area where ventilation is restricted or where there are other sources of heat.
- As with all electrical equipment, keep away from children and pets.
- Use only with a 12V DC (negative ground) or 220V AC power supply.
- Unwind the required power cable completely before use. DO NOT use this cable while it is coiled, as this may cause the cable to overheat.
- This item is not intended for the storage of medicines, chemicals, or anything that is not food or drink.
- This cooler is intended for temporary use. It is not a refrigerator designed for permanent installation or for professional use.
- When plugged in or after connection, keep the lid closed as much as possible.
- DO NOT pull out the plugs by pulling on the cables.
USE AND OPERATION
Cooler function
- Load your cooler with already cold food/drinks if possible, to avoid high consumption and the cooler having to run at full capacity.
- Select the cold mode.
- Choose the 220V or 12V connection mode .
- Select MAX mode to cool faster, or ECO mode to lower the temperature more slowly or maintain it.
- The LED on the product is displayed in GREEN.
Heat function
- Load your cooler, if possible, with food that is already hot to avoid high consumption and the engine having to run at full speed.
- Choose the warm mode .
- Choose 220V or 12V mode.
- Select MAX or ECO mode depending on the desired intensity.
- The LED on the product is displayed in RED.
Specificities for use in a car
- Unplug the unit when the vehicle engine is not running to prevent the vehicle battery from discharging.
- Start the vehicle with the cooler unplugged! Only connect the cooler when the engine is running.
- When using the cooler with the 12V DC power supply, the plug becomes hot during use.
- Leave space around the cooler during operation and sufficient airflow (ventilation or A/C).
TECHNICAL SPECIFICATIONS
CLEANING AND STORAGE
- The surfaces of the cooler can be cleaned with a cloth and a mild detergent solution.
- The cooler should not be cleaned under running water or by immersion in water. Abrasive or aggressive cleaning agents should also be avoided.
- When not in use, the cooler should be stored in a dry place, out of reach of children.
REPAIR
If the appliance does not seem to be working properly, unplug it and check the
following points: In the event of a proven fault, only a professional can
intervene. Regularly remove dust from the product and the plugs. Dust
accumulation can cause fires.
RECYCLING
This appliance must be considered as a household appliance. At the end of its
life, it cannot be mixed with household waste. It is necessary to bring the
product to a container park, a sorting centre, a waste collection centre, in
the household or electrical appliance waste bin.
PROAKCESS SRL
BE-7503 Froyennes
info@proakcess.com
www.proakcess.com