ICY BOX IB-2915MSCL-C31 Docking and Clone Station User Manual

ICY BOX IB-2915MSCL-C31 Docking and Clone Station

Important Information

Please read carefully the following information to prevent injuries, damage to material and device as well as data loss:

Warning levels
Signal words and safety codes indicate the warning level and provide immediate information in terms of the probability of occurrence as well as the type and severity of the consequences if the measures to prevent hazards are not complied with.

Warns of a directly hazardous situation causing death or serious injury.
Warns of a potentially hazardous situation that may cause death or serious injury.
Warns of a potentially hazardous situation that may cause minor injury.
Warns of a potential situation that may cause material or environmental damage and disrupt operative processes.

1. Risk of electrical shock
   Contact with parts conducting electricity Risk of death by electrical shock

   • Read the operating instructions prior to use
   • Make sure the device has been de-energized prior to working on it
   • Do not remove contact protection panels
   • Avoid contact with conducting parts
   • Do not bring plug contacts in contact with pointed and metal objects
   • Use in intended environments only
   • Operate the device using a power unit meeting the specifications of the type plate only!
   • Keep the device/power unit away from humidity, liquid, vapour and dust
   • Do not modify the device
   • Do not connect the device during thunderstorms
   • Approach specialist retailers if you require repairs

2. Hazards during assembly (if intended)
   Sharp components
   Potential injuries to fingers or hands during assembly (if intended)

   • Read the operating instructions prior to assembly
   • Avoid coming into contact with sharp edges or pointed components
   • Do not force components together
   • Use suitable tools
   • Use potentially enclosed accessories and tools only

3. Hazards caused by a development of heat
   Insufficient device/power unit ventilation
   Overheating and failure of the device/power unit

   • Prevent externally heating up components and ensure an exchange of air
   • Do not cover the fan outlet and passive cooling elements
   • Avoid direct sunlight on the device/power unit
   • Guarantee sufficient ambient air for the device/power unit
   • Do not place objects on the device/power unit

4. Hazards caused by very small parts and packaging
   Risk of suffocation
   Risk of death by suffocation or swallowing

   • Keep small parts and accessories away from children
   • Store/dispose of plastic bags and packaging in an area that is inaccessible to children
   • Do not hand over small parts and packaging to children

5. Potential data loss
   Data lost during commissioning
   Potentially irreversible data loss

   • Always comply with the information in the operating instructions/quick installation guide
   • Exclusively use the product once the specifications have been met
   • Back up data prior to commissioning
   • Back up data prior to connecting new hardware
   • Use accessories enclosed with the product

6. Cleaning the device
   Harmful cleaning agents
   Scratches, discolouration, damage caused by moisture or short circuit in the device

   • Disconnect the device prior to cleaning
   • Aggressive or intense cleaning agents and solvents are unsuitable
   • Make sure there is no residual moisture after cleaning
   • We recommend cleaning devices using a dry, anti-static cloth

7. Disposing of the device
   Environmental pollution, unsuitable for recycling
   Potential environmental pollution caused by components, recycling circle interrupted
   This icon on product and packaging indicates that this product must not be disposed of as part of domestic waste. In compliance with the Waste Electrical and Electronic Equipment Directive (WEEE) this electrical device and potentially included batteries must not be disposed of in conventional, domestic waste or recycling waste. If you would like to dispose of this product and potentially included batteries, please return it to the retailer or your local waste disposal and recycling point.

If you have any questions, please do not hesitate to contact our support at support@raidsonic.de or visit our website at www.icybox.de.

Package content

1x IB-2915MSCL-C31
1x Power adapter
1x USB combo cable
3x M.2 rubber fixation
1x Manual

Requirements

• One free USB 3.2 Gen 2 Type-C® or Type-A port
• One M.2 PCIe NVMe SSD 22x 30/42/60/80/110
• One M.2/2.5″/3.5″ SATA SSD/HDD

Overview

1. Clone button (activate/start)

2. Status LED (power/access/clone process)

3. SATA slots M.2 & 2.5″/3.5″

4. M.2 PCIe NVMe slot
   

5. Clone direction switch

6. USB Type-C® to host computer

7. Power ON/OFF button

8. Power adapter jack
   

Installation

Install the drives

1. Install the M.2 SATA SSD to the left handed M.2 B-Key slot (3).
   or
   Install the 2.5″ or 3.5″ SATA HDD/SSD to the SATA slot in the middle (3).
   
   Hint: You can only install one Source drive at a time. M.2 or 2.5″ or 3.5″ SATA drive.

2. Install the M.2 PCIe NVMe SSD to the M.2 M-Key slot (4).
   

3. Push down the M.2 PCIe NVMe SSD and lock it into place.
   

Installation for clone mode

1. Plug the power adapter into the power adapter jack (8).
   Hint: No USB connection required for clone mode.
   

2. Plug the power adapter into a household socket.
   

Installation for docking mode

1. Plug the USB cable into the Type-C® port of the IB-2915MSCL-C31 (6).

2. Plug the power adapter into the power adapter jack (8).
   

3. Plug the power adapter into a household socket.
   

4. Plug the Type-C® or Type-A plug of the USB combo cable into your host computer.
   

5. Turn ON the IB-2915MSCL-C31 by the ON/OFF button (7).
   

Usage

Clone mode

Important information before you start the cloning process:

• The target SSD (Target) must be of the same capacity or bigger than the source SSD (Source).
• If the target drive is smaller than the source drive, it is not possible to start the clone mode by pressing the button.
• Cloning creates an identical copy of your drive – there is no need for a connection to any computer.
• Since the cloning process copies every single byte of the source drive, the process may take several hours depending on the drive capacity and technology.
• After the cloning process is complete, the computer may not be able to identify both drives because they are assigned the same drive letter. To separate the drives, at least one of the SSDs must be assigned a different drive letter or marked as “online” (under Windows® it is „disk manager“).
• If only one drive is plugged into Source, there will be no action when you press the clone button (1).
• If the target drive (Target) is bigger than the source drive (Source), you may create a new volume with the remaining space on the target drive after cloning.

DO NOT connect the computer when the device is in clone mode.

• Turn on the device with the ON/OFF button (7).
  

• Select your preferred clone direction with the clone direction switch (5).
  

• As soon as the status LEDs TARGET and SOURCE light up continuously, press and hold the „clone“ button (1) for ca. 5 sec. to activate the clone mode.
  

• As soon as all LEDs light up permanently, press the „clone“ button (1) again to start the cloning process.
  

• When the 25% LED and the LEDs (2) of the source SSD and target SSD start flashing, the cloning process has started.

ATTENTION: DO NOT stop or turn off the device until the clone process is finished completely!

• If 25%/50% & 75%/100% LEDs (2) light up in pairs and alternately, an error occurred.
  Please Check:

  • If the TARGET drive is larger or the same size as the SOURCE drive
  • If one of the drives is damaged.
  • If the cloning direction has been set correctly.

• Please turn off the device and change to a suitable or functional drive.

• When the cloning process is successfully completed, all LEDs (2) light up continuously.

• Switch off the clone station with the ON/OFF button (7).
  HINT: To uninstall the drives please make sure that the device is turned off.

© Copyright 2024 by Raid Sonic Technology GmbH. All Rights Reserved.
The information contained in this manual is believed to be accurate and reliable. Raid Sonic Technology GmbH assumes no responsibility for any errors contained in this manual.
Raid Sonic Technology GmbH reserves the right to make changes in the specifications and/ or design of the above-mentioned product without prior notice. The diagrams contained in  this manual may also not fully represent the product that you are using and are there for illustration purposes only. Raid Sonic Technology GmbH assumes no responsibility for any differences between the product mentioned in this manual and the product you may have. Apple and macOS are registered trademarks of Apple Computer Inc. Microsoft, Windows and the Windows logo are registered trademarks of Microsoft Corporation.

www.quefairedemesdechets.fr

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>