MIYOTA 6S00 Smart Watch Instruction Manual

MIYOTA 6S00 Smart Watch

Product: Cal. 6S00 Chronograph Grande with Day/Date Displays and Buttons

Product Information:

• The chronograph is able to measure and display time in 1/20 second units up to a maximum of 59 minutes and 59 seconds.
• The chronograph second hand keeps continuously for 30 seconds after starting and then stops at the zero position.
• The watch has day and date display functions.
• The watch has three buttons: Button A, Button B, and the Crown.

Product Usage Instructions:

Setting the Time:

1. Pull the crown out to the 2nd click position.
2. Turn the crown clockwise to set the hour and minute hands.
3. After the time has been set, push the crown back to the normal position.

Setting the Date:

1. Pull the crown out to the 1st click position.
2. Turn the crown clockwise to set the date.
3. If the date is set between the hours of around 9:00 PM and 1:00 AM, the date may not change on the following day.
4. After the date has been set, push the crown back to the normal position.

Setting the Day:

1. Pull the crown out to the 1st click position.
2. Turn the crown anti-clockwise to set the day.
3. If the day is set between the hours of around 11:15 PM and 6:00 AM, the day may not change on the following day.
4. After the day has been set, push the crown back to the normal position.

Using the Chronograph:

Press button A to start the chronograph.

1. The chronograph can be started and stopped each time button A is pressed.
2. Press button B to reset the chronograph, and the chronograph minute and second hands return to their zero positions.

Chronograph Reset (Including After Replacing Battery):

1. Pull the crown out to the 2nd click position.
2. Press button A once to set the chronograph second hand to the zero position.
3. Press button B once to set the chronograph 1/20 second hand to the zero position.
4. The chronograph hands can be advanced rapidly by continuously pressing button A or B.
5. Once the hands have been set at the zero position, reset the time, and return the crown to its normal position.

Note: Specifications are subject to change without prior notice.

CHRONOGRAPH GRANDE with DAY/DATE

Displays and Buttons】

SETTING THE TIME

1. Pull the crown out to the 2nd Click Position.
2. Turn the crown clockwise to set hour and minute hands.
3. After the time has been set, push the crown back to the Normal position.

SETTING THE DATE

1. Pull the crown out to the 1st Click Position.
2. Turn the crown clockwise to set the date.
3. If the date is set between the hours of around 9:00 PM and 1:00 AM, the date may not change on the following day.
4. After the date has been set, push the crown back to the Normal position.

SETTING THE DAY

1. Pull the crown out to the 1st Click Position.
2. Turn the crown anti-clockwise to set the day.
3. If the day is set between the hours of around 11:15 PM and 6:00 AM, the day may not change on the following day.
4. After the day has been set, push the crown back to the Normal position.

USING THE CHRONOGRAPH
This chronograph is able to measure and display time in 1/20 second united up to maximum of 59min 59sec. The chronograph 1/20 second hand keeps continuously for 30 seconds after starting, and then stops at Zero position.

【Measuring time with the stopwatch】

1. Press button ” A ” to start the chronograph.
2.  The chronograph can be started and stopped each time button “A” is pressed.
3. Press button “B” to reset the chronograph and chronograph minute and second hands return to their Zero positions.

CHRONOGRAPH RESET (INCL. AFTER REPLACING BATTERY)
This procedure shoud be performed when the chronograph second hand does not return to the Zero position.

1. Pull the crown out to the 2nd Click Position.

2. Press the button “A” once to set the chronograph second hand to the Zero position.

3. Press the button “B” once to set the chronograph 1/20 second hand to the
   Zero position.

4. The chronograph hands can be advanced rapidly by continuously pressing button “A” or “B”.

5. Once the hands been set at Zero position, reset the time and return the crown to its normal position.

These specifications might be changed without prior notice.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>