FS PDU-5158N-HBS 1U Single Phase Basic PDU Power Strips User Guide
- June 5, 2024
- FS
Table of Contents
FS PDU-5158N-HBS 1U Single-Phase Basic PDU Power Strips
introduction
- The PDU is designed for indoor use only.
- Ensure the PDU voltage is consistent with the local one.
- The total power required by equipment connected to the PDU must not exceed the PDU’s maximum load rating.
- The PDU sockets are compatible with the matched plugs only.
- Install the PDU in dry and ventilated places.
- Do not drill into or attempt to open any part of the PDU.
- There are no user-serviceable parts inside.
- Stop using it immediately if any disorder happens.
- Never install any electrical wiring, equipment, or PDUs during a lightning storm.
PDU-5158N-HBS
PDU-CEE78I-HBS
Overview **
**
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>