ANKER A2521A PowerWave Wireless Charger User Manual

June 5, 2024
Anker

ANKER A2521A PowerWave Wireless Charger

Introduction

LED Indicator Status
Solid blue for 3 seconds, then off Connected to power
Solid blue Charging mobile device
Flashing blue –  Metal or abnormal temperature detected

–  Using an incompatible charger or cable

  • Using an ultra-thick protective phone case or a case with a magnetic/iron plate is not recommended as it may affect the wireless charging function.
  • Do not put anything else between your smartphone and the wireless charger, such as credit cards, door keys, coins, metal, NFC cards, etc.

Important Safety Instructions

  • Avoid dropping.
  • Do not disassemble.
  • Do not expose to liquids.
  • For the safest and fastest charge, use original or certified cables.
  • This product is suitable for moderate climates only.
  • The maximum ambient temperature during use of this product must not exceed 40°C.
  • Open flame sources, such as candles, must not be placed on this product.
  • Only use a dry cloth or brush to clean this product.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  1. Reorient or relocate the receiving antenna.
  2. Increase the separation between the equipment and receiver.
  3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  4. Consult the dealer or an experienced radio / TV technician for help.

Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 between the radiator & your body

IC Statement

This device complies with RSS‐216 of Industry Canada. Operation is subject to the conditions that this device does not cause harmful interference.

RSS-Gen Issue 5 March 2019 “ &” RSS-Gen numéro 5 mars 2019

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject tothe following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

RF exposure statement:
The equipment complies with the IC Radiation exposure limit set forth for uncontrolled environments. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body

Specifications

Input 12V 2A / 15V = 1.6A
Output 15W Max

Product Number: A2521 Wireless Charger

  • Indoor use only
  • The product shall not be disposed of together with the normal waste. It must be recycled.
  • Customer Service
  • 18-month Limited Warranty
  • Lifetime Technical Support

Declaration of Conformity

Hereby, Anker Innovations Limited declares that the product type A2521 is in compliance with Directive2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:

https://www.anker.com/products
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong CE POC
Name: Anker Innovations Deutschland GmbH
Address: Georg-Muche-Straße 3-5, 80807 München

support@anker.com
support.mea@anker.com (For Middle East and Africa Only)

  • (US) +1 (800) 988 7973 Mon-Fri 9:00am – 5:00pm (PT)
  • (UK) +44 (0) 1604 936200 Mon-Fri 6:00 – 11:00 (GMT)
  • (DE) +49 (0) 69 9579 7960 Mo-Fr 6:00 – 11:00

For FAQs and more information, please visit
https://www.anker.com/support

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals