VEVOR 5-16-3-8LT02 Ratchet Chain Binder User Manual
- June 15, 2024
- VEVOR
Table of Contents
VEVOR 5-16-3-8LT02 Ratchet Chain Binder
Technical Support and E-Warranty Certificate
www.vevor.com/support
RATCHET STYLE LOAD BINDER
USER’S MANUAL
We continue to be committed to provide you tools with competitive price.
“Save Half”, “Half Price” or any other similar expressions used by us only
represents an estimate of savings you might benefit from buying certain tools
with us compared to the majortop brands and doses not necessarily mean to
cover all categories of tools offered by us. You are kindly reminded to verify
carefully when you are placing an order with us if you are actually saving
half in comparison with the top major brands.
MODEL:
5/16-3/8LT02
3/8~1/2LT02
5/16-3/8LT04
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact
us: CustomerService@vevor.com
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
SAFE INSTRUCTIONS
WARNING:
- Read this material before using this product. Failure to do so can result in serious injury.
- The Ratchet Style Load Binder must be used flexibly,and it is strictly prohibited to use it compulsorily when individual connections are inflexible.
CAUTION:
- Carefully read instructions and procedures for safe operations.
INSPECTIONS
Before each use
Each time the ratchet style load binder is used, a visual inspection should
be carried out to determine whether there are abnormal conditions, such as
cracking,bending,deformation,etc.
After each use
After each use,if the tightening of the ratchet style load binder is
abnormal, the manufacturer or the supplier’s authorized maintenance personnel
should be advised to check immediately. Suggestions for Safe Use of The
Ratchet Style Load Binder
- According to the size of the binder, it should be used with the matching chain.
- When connecting the binder hook with the chain ,hang the chain at the bottom of the hook.
- Do not knot the chain when using the binder.
- When using the binder,make sure that the binder is straight without folding and twisting.
- Due to the shipping(handing) or transportation, the binder may have knots at the connection between the ring and the hook or the screw rod may be tightened. Please smooth the them before use.
- Make sure that the chain is straight without folding and twisting,If the chain has knots, please smooth the chain before use. Do not use this product directly when the chain is twisted.
- The goods are bundled on hard or relatively hard objects. When tightening the binder, please do not stretch your hand under the chain or avoid other objects that may affect personal safety.
- when using the binder, please confirm whether the goods can be fixed with the chain and whether the hardness of the chain will damage your goods.
SAVE THESE INSTRUCTIONS
PRODUCT INTRODUCTION
Model
SPEC.
| ****
5/16-3/8LT02
| ****
5/16-3/8LT04
| ****
3/8~1/2LT02
---|---|---|---
Ratchet Binder size| 5/16-3/8inch| 5/16-3/8inch| 3/8-1/2inch
Ratchet Binders
working Capacity
| ****
7100Lbs
| ****
7100Lbs
| ****
12000lbs
Handle size| Ф18×300mm| Ф18×300mm| Ф18×300mm
Chain Working
Capacity
| 4700lbs| 4700lbs| 7100lbs
Chain Size| 5/16-3/8in×20FT| 5/16-3/8in×20FT| 3/8-1/2in×20FT
Package Content
Model
PARTS
| ****
5/16-3/8LT02
| ****
5/16-3/8LT04
| ****
3/8~1/2LT02
---|---|---|---
Ratchet Binder| ×2| ×4| ×2
Handle| ×2| ×4| ×2
Chain| ×2| ×4| ×2
User’s Manual| ×1| ×1| ×1
PRODUCT DIAGRAM
INSTALLATION INSTRUCTION
-
Use both ends of the chain hooks to hold the truck or cargo in place.
-
Loosen the screw rod at both ends of the binder to the red mark, as shown in the picture.
-
Pull the chain tight manually, then hook the chain with the binder, as shown in the picture.
-
Set the switch to LOWER,insert the handle into the handle hole, and turn the handle clockwise back and forth to tighten the chain,and then remove the handle,as shown in the picture.
-
Follow the steps above to complete other binders and chains operations.
Complete bundling of goods,. -
When the transportation is complete, first switch to upper,and turn the handle counterclockwise back and forth to release the chain,and then do all the untying.
CLEANING,MAINTENANCE AND TROUBLESHOOTING
WARNING:
Procedures not specifically explained in this manual must be performed only by
a qualified technician.
To prevent serious injury from tool failure,do not use When it is damaged
- Please check the overall condition of the binder before each use.
- Is the screw loose flexible?
- Is the main body deformed?
- Does the opening of the hook widen?Is the gear deformed?
- Whether there are cracks in all parts.
- Before each use, thoroughly test whether the binder works properly before actual use. If the binder doesn’t work properly, please follow the inspection instructions to see if the problem occurs.
- To prevent serious injury,be carefully when troubleshooting the faulty binder, solve all problems before use. If the solution provided in the troubleshooting guide cannot be solved problem, please ask qualified technicians to check the binder before use.
After the binder is repaired ,twist the puller back and forth to see if it can be retracted freely.
Make sure that the binder is safe enough to continue to use it. Wish that the binder can bring you convenience at work.
Technical Support and E-Warranty Certificate
www.vevor.com/support
Made In China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>