Pioneer HDJ-CUE1 Cable and Ear Pads User Manual
- June 15, 2024
- Pioneer
Table of Contents
Pioneer HDJ-CUE1 Cable and Ear Pads
For FAQs and other support information for this product, visit the above site.
pioneerdj.com/support/
© 2020 AlphaTheta Corporation. All rights reserved.
INSTRUCTION
- To attach the cable
- Hold the convex part of the cable plug at the angle shown in the diagram and insert the cable plug.
- Rotate the convex part of the cable plug approximately 45 degrees clockwise to the position shown in the diagram to lock the cable plug.
- To detach the cable
Rotate the convex part of the cable plug approximately 45 degrees counterclockwise and then pull out the cable plug.
Removal
Hold a part of the ear pad and remove it by peeling it off the housing case.
The ear pad is just fitted into the groove of the housing (case) and can
therefore be easily removed.
Installation
- To easily attach the ear pad, insert a part of the new replacement ear pad into the groove of the housing (case) and loop on.
Precautions for use
- If any itching or skin discomfort occurs during use, cease use immediately.
- Ear pad Polyurethane (leather finish)
AlphaTheta Corporation
6F, Yokohama i-Mark Place, 4-4-5 Minatomirai, Nishi-ku, Yokohama, Kanagawa
220-0012 JAPAN / JAPON
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>