FPG I-GG-HH-24-14-A003 Food Cabinet Owner’s Manual

June 15, 2024
FPG

FPG I-GG-HH-24-14-A003 Food Cabinet

FPG I-GG-HH-24-14-A003 Food Cabinet 

SPECIFICATIONS

Showing : Isoform Grab & Go 2758mm width x 1454mm height Top Display: Heated, tilt front. Bottom Display: Heated, open front with IWave shelf

RANGE ISOFORM GRAB&GO
TEMP. TOP HEATED/TILT FRONT
TEMP. BOTTOM HEATED/OPEN FRONT
MODEL I-GG-HH-24-14-A003
INSTALLATION FREESTANDING
HEIGHT 1454mm
WIDTH 1208mm
DEPTH BASE 915mm
TEMPERATURE RANGE +65°C – +80°C
RECOMMENDED CORE PRODUCT TEMPERATURE +65°C – +80°C
ENVIRONMENTAL TEST CONDITIONS 22˚C / 65% RH

FEATURES

 High energy efficiency: estimated 4.36 kWh per hour (average)
 Cabinet operating temperature range +65°C – +80°C Recommended core product temperature +65°C – +80°C

  • Sleek black cabinet frame with silver pinstripe (default) on front, rear and doors and grille to front panel

 25,000 hour LED lighting system (colour: natural) at 2758 lumens per metre in both top and bottom displays

Tilt Front Heated Top Display

 Engineered with energy-efficient, fan assisted Thermofin heating technology to provide fast heat-up time and gentle heating for extended product shelf life

  • Tilt front glass provides easy access for cleaning

Open Front Heated Bottom Display

 Two fixed IWave shelf is brushed stainless steel and is fitted with ticket strips front and rear: 30mm (height) with caution decal applied. Shelf is supplied with 3 x 375mm removable aluminium drip trays, powdercoated black (default)
 FPG IWave heating technology uses low-wattage quartz infrared elements complemented with a heating coil in the base for even temperature distribution and extended shelf life
 Safer for consumers – display surfaces are maintained < +65°C

Operational Excellence

 Dual Action Doors (staff side) – doors both slide and swing for full-width access to the cabinet
 Constructed from stainless and mild steel with fully double-glazed, toughened safety glass for maximum energy efficiency, climate control and durability
 Fitted with an electronic controller for energy efficiency

  •  Fitted with unidirectional rollers and adjustable stabilisers

OPTIONS & ACCESSORIES

Contact a FPG Sales Representative for our full range, including:

  • Flat front panel to base
  • Pinstripe colour
  • Stainless steel product trays with three sides
  • Stainless steel pie chutes
  • Branded decals
  • Rear door or end glass mirror application
  • LED lighting colour: Warm white
  • Lockable castors

Top Display

  • Additional shelf
  • Shelf trays: Toughened safety glass or brushed stainless steel. Colour and woodprint options available for steel shelf trays

Bottom Display

  • Drip trays: Colour and woodprint options available
  • Angled base insert

HEATED DATA

| TEMPERATURE RANGE| RECOMMENDED CORE PRODUCT TEMPERATURE| ENVIRONMENTAL TEST CONDITIONS| HEATING
---|---|---|---|---
TOP DISPLAY| +65˚C – +80˚C| +65˚C – +80˚C| 22˚C / 65% RH| Fan assisted Thermofin
BOTTOM DISPLAY| IWave low-wattage infrared quartz elements

ELECTRICAL DATA

MODEL| VOLTAGE| PHASE| CURRENT| E24H (kWh)| Estimated kWh per hour (average)| IP RATING| MAINS| LED LIGHTING
---|---|---|---|---|---|---|---|---
CONNECTION| CONNECTION PLUG1| HOURS| LUMENS| COLOUR
I-GG-HH-24-14 A003| 220-240 V| Single| 32.8 A| 104.64| 4.36| IP 22| 3 metre 3 core cable| 20 amp 3 pin plug| 25,000| 2758 per metre| Natural

CAPACITY, ACCESS & CONSTRUCTION

| DISPLAY AREA| LEVELS| ACCESS FRONT| ACCESS REAR| REAR DOORS| CHASSIS CONSTRUCTION
---|---|---|---|---|---|---
TOP DISPLAY| 1.03 m2| Base only| Tilt front| Dual Action doors| 4| Stainless 304 and mild steel
BOTTOM DISPLAY| 1.93 m2| 1 Shelf + Base| Open front| Dual Action doors| 4

DIMENSIONS

MODEL H x W x D mm (Uncrated) MASS (Uncrated)
I-GG-HH-24-14-A003 1454 x 2358 x 915 – kg

Crated weights and dimensions vary. Please contact us for information on your shipment.

Installation note ; Designed to be installed as a stand alone unit. Model cutout dimensions: I-GG-HH-12-14 models require 2368 x 920mm benchtop cutout. Joinery height 407mm (see product manual for installation guide)

PLAN VIEW

Dimensions

FRONT ELEVATION

Dimensions

SECTION VIEW

REAR ELEVATION

Dimensions

More information including technical data and installation guidelines is available from the Product Manual published on our website.

In line with our policy to continually develop, improve and support our products, Future Products Group Ltd reserves the right to change specifications and design without notice.
Have a question? Please email us at sales@fpgworld.com or visit www.fpgworld.com for full contact details for your region.

© 2023 Future Products Group Limited

Worldwide contact details:

FPGWORLD.COM

CUSTOMER SUPPORT

 Indicates sustainability benefits

Symbols
Please contact FPG to discuss your requirements for meeting country-specific standards.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals