audizio 102.502 Cuneo Clock Radio Instruction Manual

: June 15, 2024
: audizio

Table of Contents

audizio 102.502 Cuneo Clock Radio
SAFETY INSTRUCTIONS
UNPACKING INSTRUCTION
CONTROLS AND CONNECTIONS
DISPLAY
SETTINGS
TECHNICAL SPECIFICATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

audizio 102.502 Cuneo Clock Radio

SAFETY INSTRUCTIONS

Congratulations on the purchase of this Audizio product. Please read this manual thoroughly before using the unit to benefit fully from all features.
Read the manual before using the unit. Follow the instructions in order not to invalidate the warranty.
Take all precautions to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician to avoid electrical shock. Keep the manual for future reference.
Before using the unit, please ask for advice from a specialist. When the unit is switched on for the first time, some smell may occur. This is normal and will disappear after a while.
The unit contains voltage-carrying parts. Therefore do NOT open the housing.
Do not place metal objects or pour liquids into the unit This may cause electrical shock and malfunction.
Do not place the unit near heat sources such as radiators, etc. Do not place the unit on a vibrating surface. Do not cover the ventilation holes.
The unit is not suitable for continuous use.
Be careful with the mains lead and do not damage it. A faulty or damaged mains lead can cause electrical shock and malfunction.
When unplugging the unit from a mains outlet, always pull the plug, never the lead.
Do not plug or unplug the unit with wet hands.
If the plug and/or the mains lead are damaged, they need to be replaced by a qualified technician.
If the unit is damaged to such an extent that internal parts are visible, do NOT plug the unit into a mains outlet, and DO NOT switch the unit on. Contact your dealer. Do NOT connect the unit to a rheostat or dimmer.
To avoid fire and shock hazards, do not expose the unit to rain and moisture.
All repairs should be carried out by a qualified technician only.
Connect the unit to an earthed mains outlet (220-240Vac/50Hz) protected by a 10-16A fuse.
During a thunderstorm or if the unit will not be used for a longer period, unplug it from the mains. The rule is to unplug it from the mains when not in use.
If the unit has not been used for a longer period, condensation may occur. Let the unit reach room temperature before you switch it on. Never use the unit in humid rooms or outdoors.
To prevent accidents in companies, you must follow the applicable guidelines and follow the instructions.
Do not repeatedly switch the fixture on and off. This shortens the lifetime.
Keep the unit out of the reach of children. Do not leave the unit unattended.
Do not use cleaning sprays to clean switches. The residues of these sprays cause deposits of dust and grease. In case of malfunction, always seek advice from a specialist.
Do not force the controls.
This unit is with a speaker inside which can cause a magnetic field. Keep this unit at least 60cm away from the computer or TV.
If this product has a built-in lead-acid rechargeable battery. Please recharge the battery every 3 months if you are not going to use the product for a long period. Otherwise, the battery may be permanently damaged.
If the battery is damaged please replace it with the same specifications battery. And dispose of the damaged battery environment-friendly.
If the unit has fallen, always have it checked by a qualified technician before you switch the unit on again.
Do not use chemicals to clean the unit. They damage the varnish. Only clean the unit with a dry cloth.
Keep away from electronic equipment that may cause interference.
Only use original spares for repairs, otherwise, serious damage and/or dangerous radiation may occur.
Switch the unit off before unplugging it from the mains and/or other equipment. Unplug all leads and cables before moving the unit.
Make sure that the main lead cannot be damaged when people walk on it. Check the mains lead before every use for damages and faults!
The mains voltage is 220-240Vac/50Hz. Check if the power outlet matches. If you travel, make sure that the mains voltage of the country is suitable for this unit.
Keep the original packing material so that you can transport the unit in safe conditions.
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should read and adhere to.
The unit has been certified CE. It is prohibited to make any changes to the unit. They would invalidate the CE certificate and their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/41°F and 35°C/95°F.
Electric products must not be put into household waste. Please bring them to a recycling center. Ask your local authorities or your dealer about the way to proceed. The specifications are typical.
The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice.
Do not attempt to make any repairs yourself. This would invalidate your warranty. Do not make any changes to the unit. This would also invalidate your warranty.
The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings contained in this manual.
Audizio cannot be held responsible for personal injuries caused by disrespect of the safety recommendations and warnings.
This is also applicable to all damages in whatever form.

UNPACKING INSTRUCTION

CAUTION! Carefully unpack the box upon receipt. Check the contents to ensure that all parts are present and have been received in good condition.
Notify the shipper immediately and retain packaging material if any parts appear damaged from shipping or the package itself shows signs of mishandling. Save the package and all packaging materials.
If the product must be returned, the product must be returned in the original factory box and packaging. If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately.
The rising condensation water might damage your device. Leave the device switched off until it has reached room temperature.

POWER SUPPLY

The label on the back/underside of the product indicates the mains voltage to which it must be connected. Check that the mains voltage corresponds to this.
Any other voltage than the one indicated may cause irreparable damage to the unit. The unit must also be connected directly to the mains voltage and no dimmer or adjustable power supply may be used.
Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate electrical ground to avoid the risk of electrocution or fire.

CONTROLS AND CONNECTIONS

Power / Source
- Press to switch modes
- Press and hold to turn the device on or enter standby mode
Alarm
- Press to set an alarm
Preset
- Press to open the preset list
- Press and hold to save a station as a preset
Snooze / Station / Select
- Press, when an alarm is ringing, to snooze
- Press to confirm listening to a chosen station
- Press to select/input
Sleep
- Press to set the sleep timer
Menu / Info
- Press to cycle through station information
- Press and hold to open the menu
Volume – / <
- Press to lower the volume during the playback
- Press in menus to scroll
Volume + / >
- Press to increase the volume during the playback
- Press in menus to scroll
Wireless charging pad
- Depending on your smartphone’s design, the charging area may be positioned differently, requiring some positional adjustment when placed on the charging surface to be functional
USB charge
- 5V USB charging port
DC power adapter input
- 9V 3.0A DC power input connector
Headphone jack
- 3.5mm jack for inserting headphones
Battery compartment
- The radio is equipped with a battery-powered backup system, which requires 2 AAA batteries (not included).
- Open the battery compartment. Insert the batteries, making sure the positive and negative (+ or -) poles of the batteries are in contact with the corresponding terminals within the battery compartment.
- Close the battery compartment by inserting the cover. If a power cut/outage occurs, the radio automatically switches to the battery power supply and keeps the clock and timer settings.
- When replacing the battery: keep the power adapter connected, otherwise all clock and alarm settings will be lost.

DISPLAY

Current station and time
Sleep timer indicator
Set alarm indicator
PM indicator
Snooze indicator
Charging smartphone indicator
Volume
Signal strength
DAB mode indicator
FM mode indicator
BT mode indicator

GETTING STARTED

Remove the radio from the package box.
Plug in the power adapter and press [Power].
Caution: Use only the adapter supplied with the radio. Connecting a power supply with a different rating can cause permanent damage to the radio and may be hazardous.
Note: Make sure to fully extend the antenna (located at the back of the unit) to ensure the best possible FM and DAB reception.

DAB +

If there is Digital Audio Broadcasting (DAB) in your area, the Radio can pick up the DAB stations as well. The radio supports both DAB and DAB+.
Place the radio close to the window and extend the antenna as far as it can go to get the best reception.
Sometimes you may need to adjust the direction of the antenna to improve reception.
Press [Source] to select DAB mode. The first time DAB mode is selected, the unit will automatically search for available stations.
Auto scan: In DAB mode, press and hold [Menu/Info]. Press [Volume +/>] or [Volume -/<] to select ‘FULL Scan’ and press [Snooze / Station / Select] to confirm.
The number of found stations will be displayed during the automatic scan.
When finished, the device will tune into the last listened-to station.
Station presetting: While playing in DAB mode, press and hold [Preset]. Press [Volume +/>] or [Volume -/<] to select the desired preset slot (1-30), press [Snooze / Station / Select] to store.
Press [Preset] to recall memory. Press [Volume +/>] or [Volume -/<] to select the stored station you want to listen to. Press [Snooze / Station / Select] to confirm.
Show channel information: Press [Menu/Info] repeatedly to show various forms of information regarding the station that is being played.

FM RADIO

To receive the ordinary FM stations, place the radio close to a window and extend the antenna as far as it can go to get the best reception. You may need to adjust the direction of the antenna to improve reception.
Press [Source] to select FM mode.
Auto scan: Press [Snooze / Station / Select], “<” and “>” are shown on the display. Press and hold [Volume +/>] or [Volume -/<], the device will start scanning for the next strong station automatically.
Manual scan: Press [Snooze / Station / Select], “<” and “>” are shown on the display. Press [Volume +/>] or [Volume -/<] to scroll the frequency value.
Station presetting: While playing in FM mode, press and hold (Preset). Press [Volume +/>] or [Volume -/<) to select the desired preset slot (1-30), and press [Snooze / Station / Select] to store.
Press [Preset] to recall memory. Press [Volume +/>] or [Volume -/<] to select the stored station you want to listen to. Press [Snooze / Station / Select] to confirm.
Show channel information: Press [Menu/Info] repeatedly to show various forms of information regarding the station that is being played.

BT PLAYBACK

Before transmission between your BT device and the radio is possible, both devices must be coupled. This process is called “pairing”. The radio is served as a receiver, to receive the music stream to be played on the radio.
If you have already coupled to a BT device before, this connection will be restored automatically when both devices are in range and BT operation has been selected on the radio. “Pairing” does not have to be repeated.
This function may need to be activated in your BT device, however.
Press [Source] to enter BT mode.
Turn on BT streaming on your device. The device will scan for pairable BT devices in the reception range.
Select “Audizio Cuneo” from the list of found devices. Enter “0000” if a passcode is required.
Start playback on your BT device. Playback now takes place emitting sound from the radio.

SET ALARM

Setting an alarm will switch the radio on (if in standby mode) and tune into a DAB- or an FM radio station or sound a buzzer-type tone. To set an alarm:
Press [Alarm1] or [Alarm2].
Press [Volume +/>] or [Volume -/<] to set the hour value for the alarm and press [Snooze / Station / Select] to confirm.
Press [Volume +/>] or [Volume -/<] to set the minute value for the alarm and press [Snooze / Station / Select] to confirm.
Press [Volume +/>] or [Volume -/<] to set the duration of the alarm (in minutes) and press [Snooze / Station / Select] to confirm.
Press [Volume +/>] or [Volume -/<] to select Buzzer, DAB or FM and press [Snooze / Station / Select] to confirm.
Press [Volume +/>] or [Volume -/<] to select the radio station that you want to sound when the alarm goes off (when FM or DAB has been selected). It’s possible to select one of the saved preset stations or you can select ‘Last listened’ to select the station that you were last listening to. Press [Snooze / Station / Select] to confirm.
Press [Volume +/>] or [Volume -/<] to select one of the following alarm frequency options: “Daily”, “Weekdays”, “Weekends” and “Once” and press [Snooze / Station / Select] to confirm.
Press [Volume +/>] or [Volume -/<] to set the volume of the alarm and press [Snooze / Station / Select] to confirm.
Press [Volume +/>] or [Volume -/<] to select “on” or “off” and press [Snooze / Station / Select] to save.
The alarm icon will appear on the display.

Switching an alarm on/off

Press [Alarm1] or [Alarm2] to toggle on/off an alarm. The alarm icon will appear/disappear to indicate the input.

Snoozing

You can activate the snooze function by pressing [Snooze / Station / Select] when the alarm sounds. The alarm sound will then be muted and triggered again after 10 minutes. During snooze, the count-down time will be displayed.
To stop the snooze function, press [Power].

SLEEP TIMER

This function allows programming the device to switch into standby mode by itself after a set period.
Press [Sleep] to enter the sleep mode, and press [Sleep] repeatedly to set the desired sleep time. When the timer reaches zero, the unit will go into standby mode automatically.
To cancel the sleep timer, press [Sleep] repeatedly to select “Sleep off”.

KITCHEN TIMER

This function allows programming the device to sound an alarm after a set period (countdown timer).
Press and hold [Menu/Info].
Press [Volume +/>]or [Volume -/<] and select “System”. Press [Snooze / Station / Select] to confirm.
Press [Volume +/>] or [Volume -/<] and select “Kitchen timer”. Press [Snooze / Station / Select] to confirm.
Press [Volume +/>] or [Volume -/<] to change the minutes. Press [Snooze / Station / Select] to confirm and start the countdown timer.
The alarm will sound after the period you have set has elapsed, both in “On”- and “Standby” modes.

SETTINGS

Clock settings

Setting the time and date: The time and date are automatically synchronized with the FM- or DAB signal.

Manual time-/date setting:

Press and hold [Menu/info].
Press [Volume +/>] or [Volume -/<] to select ‘System’ and press [Snooze / Station / Select] to confirm.
Press [Volume +/>] or [Volume -/<] to select ‘Time’ and press [Snooze / Station / Select] to confirm.
Press Volume +/21 r Volume /lto select outies spree Station / Seen Seein. repeat to set the minutes.
Press [Volume +/>] or [Volume -/<] to set the day, and press [Snooze / Station / Select] to confirm. Repeat to set the month and the year.

Changing the time format:

Press and hold [Menu/info].
Press volume 1 or Volume / to select me mares ne son see confirm.
Press [Volume +/>] or [Volume -/<] to select ‘Set 12/24 hour’ and press [Snooze / Station / Select] to confirm.
Press [Volume +/>] or [Volume -/<] to choose between ’12 12-hour and ’24 hour’ and press [Snooze / Station / Select] to confirm.

Changing the date format:

Press and hold [Menu/info].
Press Volume 1/1 or Volume /2) to select espresso stones coco.
Press [Volume +/>] or [Volume -/<] to select ‘Set date format’ and press [Snooze / Station / Select] to confirm.
Press [Volume +/>] or [Volume -/<] to choose between ‘DD-MM-YYYY’ and ‘MM-DD-YYYY’. Press [Snooze / Station / Select] to confirm.

Changing the language

Press [Volume +/>] or [Volume -/<] to select ‘System’ and press [Snooze / Station / Select] to confirm.
Press [Volume +/>]or [Volume -/<] to select ‘Language’ and press [Snooze / Station / Select] to confirm.
Press [Volume +/>] or [Volume -/<] to select the desired language and press [Snooze / Station / Select] to confirm.

Factory settings

Resetting removes all presets, clears the station list, and resets all options to the default setting.
Press and hold [Menu/info].
Press [Volume +/>] or (Volume -/<] to select ‘ System’ and press [Snooze / Station / Select] to confirm.
Press [Volume +/>] or [Volume -/<] to select ‘YES’ and [Snooze / Station / Select] to confirm.

Audio settings

Use this menu to adjust the bass and treble settings.
Press and hold [Menu/info].
Press [Volume +/>] or [Volume -/<] to select ‘System’ and press [Snooze / Station / Select] to confirm.
Press [Volume +/>] or [Volume -/<] to select ‘Bass’ or ‘Treble’ and press [Snooze / Station / Select] to confirm.
Press [Volume +/>] or [Volume -/<] to adjust the bass or treble levels. You can choose a level between ‘-3’ and ‘+3’, press [Snooze / Station / Select] to confirm.

Backlight

Adjust the brightness and the duration of the screen illumination.

On level

Press and hold [Menu/info].
Press [Volume +/>] or [Volume -/<] to select ‘System’ > ‘Backlight’ and press [Snooze / Station / Select] to confirm. Press [Volume +/>] or [Volume -/<] to select ‘On level’ and press [Snooze / Station / Select] to confirm.
Press [Volume +/>] or [Volume -/<] to choose between ‘High’, ‘Medium’, or ‘Low’ and press [Snooze / Station / Select] to confirm.

Timeout

Press and hold [Menu/info].
Press [Volume +/>] or [Volume -/<] to select ‘System’ > ‘Backlight’ and press [Snooze / Station / Select] to confirm. Press [Volume +/>] or [Volume -/<] to select ‘Time out’ and press [Snooze / Station / Select] to confirm.
Press [Volume +/>] or [Volume -/<] to choose the timeout setting. To specify that the backlight should always remain on, choose ‘On’.

Dynamic range control

Dynamic Range Control (DRC): DRC can make quieter sounds easier to hear when the unit is used in a noisy environment. The DRC level of a broadcast is set by the broadcaster and is transmitted with the service.
Changing the DRC value on the unit enables you to apply a scaling factor to this level. Choose between 3 levels of compression.
Press and hold [Menu/info] for 2 seconds to view the main menu.
Press [Volume +/>] or [Volume -/<] to choose ‘DRC’ and press [Snooze / Station / Select] to confirm.
DRC high: Applies maximum compression to the DRC level.
DRC low: Applies reduced compression to the DRC level.
DRC off: Removes DRC compression.

WIRELESS CHARGE

Depending on your smartphone’s design, the charging area may be positioned differently, requiring some positional adjustment when placed on the charging surface to be functional.

CAUTION:

Remove the metal protective or magnetic case from the smartphone before initiating charging. When charging, do not place any magnetic-striped or other metal objects on the charger.
Doing so could damage the smartphone and/or the radio.

TECHNICAL SPECIFICATION

Playback options: BT streaming, DAB+ tuner, FM radio
Input connections : 3.5mm Jack
Output connections: USB
Power supply : 100-240VAC 50/60Hz (9V Adapter)
Dimensions (L x W x H) : 170 x 105 x 58mm
Weight: 0,45kg
The specifications are typical. The actual values can slightly change from one unit to the other.
Specifications can be changed without prior notice.
The products referred to in this manual conform to the European Community Directives to which they are subject: