SIEMENS EQ300 Fully Automatic Espresso Machine Instruction Manual

: June 15, 2024
: SIEMENS

SIEMENS EQ300 Fully Automatic Espresso Machine

Product Information

This is the user manual for the EQ300 TF30, a fully automatic espresso machine manufactured by Siemens Home Appliances.

Specifications

Fully automatic espresso machine
Model: EQ300 TF30

Product Usage Instructions

Safety

Safety Precautions:

WARNING: Risk of suffocation! Keep plastic bags and packaging materials away from children.
Only use approved adapters and power cords provided by the manufacturer.

Environmental Protection and Energy Saving

Separate and dispose of packaging materials according to their types.

Energy Saving:

Follow energy-saving practices recommended in the user manual to reduce power consumption.

Delivery Contents

Included Items:
1 Wassertank (water tank)
1 Deckel Wassertank (water tank lid)
1 Tassenheizung (cup heater)
1 Display
1 Ein/Aus-Taste (power button)

Getting Familiarized with the Machine

Please refer to Figure 2 for visual references.

Wassertank (water tank)
Deckel Wassertank (water tank lid)
Tassenheizung (cup heater)
Display
Ein/Aus-Taste (power button)

FAQ

Q: How do I register my appliance on My Siemens?

A: Visit the My Siemens website and follow the instructions to register your appliance.

Safety

Observe the following safety instructions.

General information

Read this instruction manual carefully.
Keep the instruction manual and the product information safe for future reference or for the next owner.
Do not connect the appliance if it has been damaged in transit.

Intended use

Only use this appliance:
for preparing hot drinks.
in private households and enclosed spaces in a domestic environment.
up to an altitude of max. 2000 m above sea level.

Restriction on user group

This appliance may be used by children aged 8 or over and by people who have reduced physical, sensory, or mental abilities or inadequate experience and/or knowledge, provided that they are supervised or have been instructed on how to use the appliance safely and have understood the resulting dangers.
Do not let children play with the appliance.
Children must not perform cleaning or user maintenance unless they are at least 8 years old and are being supervised.
Keep children under the age of 8 years away from the appliance and power cable.

Safety information

WARNING ‒ Risk of suffocation!
Children may put packaging material over their heads or wrap themselves up in it and suffocate.
Keep packaging material away from children.
Do not let children play with packaging material.
Children may breathe in or swallow small parts, causing them to suffocate.
Keep small parts away from children.
Do not let children play with small parts.
WARNING ‒ Risk of electric shock! Incorrect installation is dangerous.
Connect and operate the appliance only under the specifications on the rating plate.
Connect the appliance to a power supply with alternating current only via a properly installed socket with earthing.
The protective conductor system of the domestic electrical installations must be properly installed.
If the appliance or the power cord is damaged, this is dangerous.
Never operate a damaged appliance.
Never operate an appliance with a cracked or fractured surface.
Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains.
If the appliance or the power cord is damaged, immediately unplug the power cord or switch off the fuse in the fuse box.
Call customer services.
Incorrect repairs are dangerous.
Repairs to the appliance should only be carried out by trained specialist staff.
Only use genuine spare parts when repairing the appliance.
If the power cord of this appliance is damaged, it must be replaced by the manufacturer, the manufacturer’s Customer Service, or a similarly qualified person to prevent any risk.
An ingress of moisture can cause an electric shock.
Never immerse the appliance or the power cord in water.
Liquids must not be spilled on the appliance plug connection.
Only use the appliance in enclosed spaces.
Never expose the appliance to intense heat or humidity.
Do not use steam- or high-pressure cleaners to clean the appliances.

WARNING ‒ Risk of fire!

The appliance will become hot.
Ventilate the appliance adequately.
Never operate the appliance in a cupboard.
It is dangerous to use an extended power cord and non-approved adapters.
Do not use extension cables or multiple socket strips.
Only use adapters and power cords approved by the manufacturer.
If the power cord is too short and a longer one is not available, please contact an electrician to have the domestic installation adapted.
WARNING ‒ Risk of burns! Some parts of the appliance become very hot.
Never touch hot appliance parts.
Allow hot appliance parts to cool down before touching.
WARNING ‒ Risk of scalding! Freshly prepared drinks are very hot.
Leave drinks to cool down if necessary.
Do not let escaping liquids or steam come into contact with your skin.
WARNING ‒ Risk of injury! Improper use of the appliance may endanger the user.
To avoid injuries, only use the appliance for its intended purpose.
Trapped fingers when closing the appliance door.
Be careful of your fingers when closing the appliance door. The grinder rotates.
Never reach into the grinder.

WARNING ‒ Danger: Magnetism!

The appliance contains permanent magnets. These may affect electronic implants, e.g. pacemakers or insulin pumps.
People with electronic implants must stand at least 10 cm away from the appliance.
This minimum distance of 10 cm must also be observed for the water tank when removed.

WARNING ‒ Risk of harm to health!

Soiling on the appliance may be harmful to health.
To ensure hygiene, follow the cleaning instructions for the appliances.

Environmental protection and saving energy

Disposing of packaging

The packaging materials are environmentally compatible and can be recycled.
Sort the individual components by type and dispose of them separately.

Tips for saving energy

If you follow these instructions, your appliance will use less power.
Set the interval for automatic switch-off to the smallest value.
If the appliance is not being used, it will switch itself off earlier Basic settings
Do not interrupt the dispensing process prematurely.
The amount of water or milk that is heated is used optimally.
Descale the appliance regularly.
limescale deposits increase the appliance’s energy consumption.

Installation and connection

Scope of delivery

After unpacking all parts, check for any damage in transit and the completeness of the delivery.
Note: Different accessories are en-closed depending on the appliance model. This accessory is shown in a frame with a dashed line.

Fig. 1

A Fully automatic coffee machine
B Milk frother
C User manual
D Cleaning tablet 1
E Descaling tablet 1
F Water filter 1
Depending on the appliance specifications

Installing and connecting the appliance

ATTENTION!

Risk of damage to the appliance. If the appliance is not started up correctly, it may be damaged.
Use the appliance in frost-free rooms only.
If the appliance has been transported or stored below 0°C, wait 3 hours at room temperature before starting it up.
After plugging in, always wait approximately 5 seconds.

Place the appliance on a level, water-resistant surface that is capable of bearing its weight.
Using the mains plug, connect the appliance to an earthed socket that has been correctly installed.

Familiarising yourself with your appliance

Appliance

You can find an overview of the parts of your appliance here.
Note: Individual details and colors may differ, depending on the appliance model.

Fig. 2

Water tank
Cover for water tank
Cup heater1
Display
Rotary selector for grinder setting
On/off button
- Depending on the appliance specifications
Aroma lid
Bean container
Control panel
Milk frother holder
Brewing unit
Rating plate
Milk frother
Outlet system
Brewing chamber door
Drip tray
Drip pan
Filling state indicator, mechanical
Drip grate
Coffee dregs container

Depending on the appliance specifications

Control panel

You can use the control panel to configure all functions of your appliance and to obtain information about the operating status.

Display

The display shows the selected drinks, settings, and setting options, as well as messages about the appliance’s operating status.
The display shows additional information and action steps. The information is hidden after a short period or by pressing a button.
The action steps are hidden when they have been completed.
Note: If no display language is available in your national language, select a display language that is available, e.g. English.

Accessories

Use original accessories. These have been made especially for your appliance.

Accessories	Retail	Customer service
Cleaning tablets	TZ80001A	00312097
	TZ80001B	00312098
Descaling tablets	TZ80002A	00312094
	TZ80002B	00312095
Water filter	TZ70003	00575491
Accessories	Retail	Customer service
---	---	---
Water filter pack of 3	TZ70033A	–
Microfibre cloth	–	00460770
Care set	TZ80004A	00312105
	TZ80004B	00312106

Before using the first time

prepare the appliance for use.

Preparing and cleaning the appliance

Remove the protective foils and clean the appliance and individual parts. Follow the illustrated instructions at the beginning of this manual.

ATTENTION!

Unsuitable beans can block up the grinder.
Only use pure, roasted bean mixes that are suitable for use in fully automatic coffee or espresso machines.
Do not use glazed coffee beans.
Do not use caramelized coffee beans.
Do not use coffee beans that have been treated with additives containing sugar.
Do not add ground coffee.

Fig. 3 – 10

Note: Fill the water tank each day with fresh, cold, non-carbonated water.
Tip: To keep the coffee beans at their best, store them in a sealed container in a cool place.
You can keep the coffee beans in the bean container for several days without them losing their aroma.

Performing initial start-up

After connecting the appliance to the power supply, configure the settings for the language selection. The language selection step only appears when the machine is switched on for the first time.

Press to switch on the appliance.
- The display will show the preset language.
Press the 7-button Cappuccino repeatedly until the display shows the required language.
- To confirm that you want to use these settings, press the “ok” button Latte Macchiato.
The appliance is rinsed. When the display shows “Choose beverage”, the appliance is ready for use.

Tip: You can change the language at any time.

General information

Please bear this information in mind so that you can get the best out of your appliance.

Notes

The appliance has been programmed at the factory with standard settings for optimum operation.
The grinder has been factory-set for optimum operation. If coffee is only dispensed drop by drop or is too thin and with too little crema, you can adjust the grinding level when the grinder is running.
Adjusting the grinding level
During operation water droplets may form at the ventilation slits.
If you do not perform any actions on the appliance for a certain period, it will switch off automatically.
You can change the duration in the basic settings.
For technical reasons, steam can escape from the appliance.
If you press a button, a signal tone sounds. You can deactivate the signal tone in the basic settings.
Tip: Check and set the water hardness before using your appliance.

Note

The first beverage will not yet have its full aroma if:
You are using the appliance for the first time.
You have run a service program.
You have not used the appliance for a long time.
Do not drink the beverage.
Tip: You will get a stable, fine-pored crema after you have started up your appliance and dispensed a few cups.

Water filter1

You can use a water filter to minimize limescale deposits and reduce impurities in the water.

Inserting or replacing a water filter

If you have to change the inserted water filter, lights up on the display.

ATTENTION!

Possible damage to the appliance due to limescale build-up.
Change the water filter in good time.
Change the water filter after 2 months at the latest.
Observe the display messages.

Requirement: The appliance is switched on.

Press and hold button and calc n Clean simultaneously for at least 3 seconds.
Press the buttons Cappuccino until the display shows “W. hardness”.
Confirm with the “ok” button Latte Macchiato.
Press the button Cappuccino until the display shows “Water filter”.
Confirm with the “ok” button Latte Macchiato.
- The display shows “Filter act.”.
Immerse the water filter in a glass of water with the opening facing up and press the sides together lightly until no more air bubbles rise to the surface. → Fig.7
Set the water hardness on the aroma ring of the water filter.
- Press the water filter firmly into the empty water tank → Fig. 8
- You can find out the water hardness from your local water supplier.
Fill the water tank with water up to the max mark.
Insert the water tank into the appliance.
Place a container with a capacity of at least 1.0 l under the outlet.
Press the “ok” button to save the setting and start rinsing.
- Water will now flow through the filter.
Press the “<” button to exit the menu.
Empty the container.

The appliance is ready to use.

Removing the water filter
You can also operate your appliance without a water filter.

Remove the water filter.
Set the water hardness. Basic settings

Tips

You should also change your water filter for reasons of hygiene.
With a water filter, you need to descale your appliance less frequently.
If you use a water filter, your coffee will be more flavorsome.
The water filter can be purchased from retailers or customer service Accessories

Basic operation

Switching the appliance on or off

Press
When the appliance is switched on or off, it will rinse itself automatically.
When switched off, the appliance will emit steam into the drip tray for cleaning.
The appliance will not rinse itself if the appliance is still warm when switched on or if no beverage was dispensed before it was switched off.

Dispensing beverages

Find out how to prepare a drink of your choice.
WARNING Risk of scalding!
Freshly prepared drinks are very hot.
Leave drinks to cool down if necessary.
Do not let escaping liquids or steam come into contact with your skin.

Dispensing a coffee drink made from fresh beans

Place a cup under the outlet system.
To set the coffee strength, press the button repeatedly.
Press button Espresso or Caffe Crema,

The coffee is brewed and then disposed of into the cup.
Tip: To stop the current dispensing step early, press the Espresso or Caffe Crema button.

Dispensing drinks with milk

You can make coffee drinks with milk or froth up milk.
WARNING Risk of burns
The milk frother gets very hot.
Let the milk frother cool down before you touch it.
ATTENTION! Milk residues can dry on surfaces and are difficult to remove.
Clean the milk frother after each use.

Tips

You can also use plant-based alternatives to milk, e.g. soya milk.
The quality of the milk froth depends on the type of milk or plant-based alternative used.
Dispensing a coffee drink with milk
You can choose between cappuccino and latte macchiato.

Fill a large cup or a large glass with approx. 100 ml milk for cappuccinos or approx. 150 ml milk for latte macchiato.
Place the cup or glass under the outlet system.
Slide the outlet system and milk frother right down.
To set the coffee strength, press the button repeatedly.
Press button Cappuccino or Latte Macchiato.

The milk is first frothed up in a cup or glass.
The coffee is then brewed and dispensed into the cup or the glass.

Tip: To stop the current dispensing step early, press the Cappuccino or Latte Macchiato button.

Frothing up milk

Fill a large cup or a large glass with approx. 100 ml milk.
Place the cup or glass under the outlet system.
Slide the outlet system and milk frother right down.
Press the Milk button.

The milk is frothed up.
Note: To stop the dispensing process early, press the Milk button.

Drink settings

Prepare a drink according to your taste.
Adjusting the coffee strength
Before making a drink, you can adjust the coffee’s strength.
To adjust the coffee strength, press the button repeatedly.
Note: The coffee strength selected is then active for all drinks made with coffee.

Adjusting the filling level

You can adjust the filling level of your drinks.

Place a cup under the outlet system.
Press and hold button Espresso or Caffe Crema for 3 seconds.
- Dispensing takes place, with the button selected flashing.
- The display shows the progress. Fig. 11
Once the required filling level is reached, press the button selected to stop.

Notes

The new filling level is only apparent when the next drink is dispensed.
You can set the filling level between 25-60 ml for espresso or 80-200 ml for caffe crema.
The appliance always brews a minimum quantity of approx. 25 ml for espresso and approx. 80 ml for caffe crema.
Tip: You can change the settings at any time Basic settings

Adjusting the frothing time

You can adjust the frothing time of your drinks.

Fill a large cup or a large glass with approx. 100 ml milk for cappuccino or approx. 150 ml milk for latte macchiato.
Place the cup or glass under the outlet system.
Slide the outlet system and milk frother right down.
Press and hold the button Cappuccino, Latte Macchiato, or Milk for 3 seconds.
- The milk is frothed up, and the button selected flashes.
- The display shows the progress
Once the required frothing time is reached, press the button selected to stop.

Notes

You can set a limited time depending on the drink.
Setting the frothing time has no impact on the filling level.
Tip: You can change the settings at any time Basic settings

Dispensing two cups at once

Depending on your beverage, you can make 2 cups at the same time.

Press the button.
- The display shows “Double cup on” for 5 seconds.
Place two cups on the left and right under the outlet system.
Press button Espresso or Caffe Crema,
- The LED in the button pulses.
- The drink is prepared in 2 steps.
- The beans are ground in 2 grinding operations.
- The drink is brewed and then runs into the cup.
Wait until the process is complete.
To switch off the double cup function, press the button.

Notes

You can set the double cup function for Espresso or Caffe Crema only.
If you have set the double cup function, you cannot dispense other drinks.
If you do not press any other button within 90 seconds, the appliance automatically switches to the Double cup off” setting.

Grinder

Your appliance has an adjustable grinder, which you can use to customize the grinding level of your coffee beans.

Adjusting the grinding level

Set the desired grinding level while the coffee beans are being ground.
WARNING Risk of injury!
The grinder rotates.
Never reach into the grinder.
ATTENTION! Risk of damage to the grinder. The grinder may be damaged if the grinding level is not set properly.
Only set the grinding level when the grinder is running.
Select the grinding level using the rotary selector step by step.
Tip: If the coffee is only dispensed drop by drop, set a coarser grinding level.
If the coffee is too thin with too little crema, set a finer grinding level.

Cup heater

You can use the cup heater to preheat your cups.

Activating and deactivating the cup heater

WARNING Risk of burns!
The cup heater1 can become very hot.
Never touch the cup heater while hot.
Allow the hot cup heater to cool down before touching it.
Tip: Place the cups with their base on the cup heater to warm them to optimum effect
To activate or deactivate the cup heater press the button

Basic settings

You can configure the basic settings for your appliance to meet your needs and call up additional functions.

Changing the basic settings

Press and hold buttons and calc’n Clean simultaneously for at least 3 seconds.
Press the button Cappuccino repeatedly until the display shows the required setting.
Confirm with the “ok” button Latte Macchiato.
Press the button Cappuccino to change the setting.
- Cleaning and servicing
Confirm with the “ok” button Latte Macchiato.
- The display shows “Settings saved”.
Press the “<” button Caffe Crema to exit the menu.

Note: If you do not press any other button within 90 seconds, the appliance switches to the select beverage setting without saving.
Tip: You can change the settings at any time.

Overview of basic settings

You can find an overview of the basic settings here.

Cleaning and servicing

To keep your appliance working efficiently for a long time, it is important to clean and maintain it carefully.

Dishwasher-safe components

Here you can find an overview of the components you can clean in the dishwasher.

ATTENTION!

Some components are sensitive to heat and may be damaged if they are cleaned in a dishwasher.
Follow the operating instructions of the dishwasher.
Only clean dishwasher-safe components in the dishwasher.
Only use programs that do not heat the components above 60 °C.

Suitable:

Drip plate
Drip grate
Coffee dregs container
Mechanical fill level indicator
Milk frother

Not suitable:

Water tank
Water tank lid
Aroma lid
Brewing unit
Drip tray

Cleaning agent

Only use suitable cleaning agents.

ATTENTION!

Unsuitable cleaning products may damage the surfaces of the appliance.
Do not use harsh or abrasive detergents.
Do not use cleaning agents containing alcohol or spirits.
Do not use hard scouring pads or cleaning sponges.
Unsuitable cleaning and descaling agents may damage the appliance.
Do not use pure citric acid, vinegar, or any vinegar-based agents to describe the appliance.
Do not use a descaling agent with phosphoric acid.
Only use cleaning tablets and descaling tablets that have been specially developed for the appliance. Accessories

Tips

Wash new sponge cloths thoroughly to remove any salt adhering to them. Salt can cause rust film to develop on stainless steel surfaces.
Always remove any residues of limescale, coffee, milk, and cleaning/descaling solutions immediately to prevent corrosion.

Cleaning the appliance

WARNING Risk of electric shock!

An ingress of moisture can cause an electric shock.
Never immerse the appliance or the power cord in water.
Liquids must not be spilled on the appliance plug connection.
Do not use steam- or high-pressure cleaners to clean the appliance.
WARNING Risk of burns!
Some parts of the appliance become very hot.
Never touch hot appliance parts.
Allow hot appliance parts to cool down before touching.

Disconnect the appliance from the main power supply.
Clean the housing, the high-gloss surfaces, and the control panel with a microfibre cloth.
Clean the outlet system with a soft, damp cloth after beverages have been dispensed.
Rinse the water tank with fresh, clean water.
If the appliance has not been used for a long time, e.g. after a holiday, clean the entire appliance, including moving parts such as the brewing unit or water tank.

Note: The appliance will rinse itself automatically if you switch it on when it is cold or switch it off after it has dispensed coffee. The system is therefore self-cleaning.

Cleaning the drip tray and coffee dregs container

Clean and empty the drip tray and coffee dregs container every day to prevent deposits. Follow the illustrated instructions at the beginning of this manual Fig. 12 – 16

Cleaning the milk frother

Clean the milk frother after each use to remove residues and ensure its proper function.
WARNING Risk of burns!
The milk frother gets very hot.
Let the milk frother cool down before you touch it.

Fill a glass half-full with water and place it under the outlet system.
Push the milk frother right down.
Press the button.
- The milk system is cleaned.
Push the milk frother right up and allow it to cool down.
Remove the milk frother and clean it thoroughly.
Attach the milk frother again.

Note: To stop the process early, press the button.
Tip: You can clean the milk frother in the dishwasher. After rinsing, remove the detergent residues thoroughly from the milk frother.

Cleaning the brewing unit

In addition to automatic rinsing, remove and clean the brewing unit regularly. Follow the illustrated instructions at the beginning of the manual.
WARNING Risk of burns!
Some parts of the appliance become very hot.
Never touch hot appliance parts.
Allow hot appliance parts to cool down before touching.

ATTENTION!

The brewing unit may be damaged by improper cleaning.
Do not use washing-up liquid.
Do not use cleaning agents containing vinegar or acids.
Do not clean the dishwasher Fig. 17 – 26
Note: The door can only be closed if the brewing unit and drip tray are inserted correctly.

Service programmes

The calc ‘n Clean button lights up and the display shows “Calc’nClean re-quired!” depending on the water hardness and use of your appliance.
Use the program to descale and clean your appliance.

ATTENTION!

Improper cleaning and descaling or a delay in doing so may damage the appliance.
Perform Calc’nClean according to the instructions immediately.
Only put cleaning tablets in the duct of the brewing unit.
Do not put descaling tablets or other products in the duct of the brewing unit.

Notes

If you do not descale and clean the appliance in good time, the appliance is locked and the display shows “Device locked”.
To unlock the appliance, run the service program.
Tip: Before you start the service program, remove, clean, and re-insert the brewing unit. Clean the milk frother.

Start Calc’nClean

The process takes approx. 40 minutes.

Press and hold the calc ‘n Clean button for at least 5 seconds symbol lights up.
Open the door.
Remove and empty the drip tray and coffee dregs container.
Remove and clean the brewing unit.
Put a cleaning tablet into the duct of the brewing unit and re-insert the brewing unit.
Insert the drip tray and coffee dregs container again and close the door.
- the symbol lights up.
If there is a water filter, remove it.
Fill the empty water tank with lukewarm water up to the 0.5 l mark and dissolve one Siemens descaling tablet in it.
Re-insert the water tank and place the container with approx. 1 I capacity under the outlet system.
When calc in Clean flashes, press the calcín Clean button.
- The program starts, cleans, and descales the appliance.
- calc n Clean pulses.
- The process takes approximately 20 minutes minutes.
- the symbol lights up.
Empty the container and open the door.
Empty the drip tray and re-insert.
Close the door and place the container under the outlet system again.
- the symbol lights up.
Clean the water tank.
If you have removed the water filter, re-insert the water filter.
Fill the water tank with fresh, cold, non-carbonated water up to the
When cal in Clean flashes, press the calc in Clean button.
- The program starts, cleans, and rinses the appliance.
- calcín Clean pulses.
- the symbol lights up.
Remove and empty the drip tray and coffee dregs container.
Clean the drip tray and the coffee dregs container and re-insert them in the appliance.
- The program has ended and the appliance is ready for operation again.

Resetting a service program

If the service program is interrupted, e.g. by a power cut, calcium Clean will light up.

Clean the water tank.
If you have removed the water filter, re-insert the water filter.
Fill the water tank with fresh, cold, non-carbonated water up to the max mark.
- Press the calc’n Clean button.
- The service program starts and rinses the appliance. The process takes approximately 2 minutes.
Empty the drip tray, clean it, and reinsert it.
Close the door.
The program has ended and the appliance is ready for operation again.

Troubleshooting

You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting after-sales service.
This will avoid unnecessary costs.

WARNING Risk of electric shock!

Incorrect repairs are dangerous.
Repairs to the appliance should only be carried out by trained specialist staff.
Only use genuine spare parts when repairing the appliance.
If the power cord of this appliance is damaged, it must be replaced by the manufacturer, the manufacturer’s Customer Service, or a similarly qualified person to prevent any risk.

Transportation, storage, and disposal

Activating frost protection

Protect your appliance from frost during transport and storage.
ATTENTION!

Residues of liquid in the appliance may damage it during transport or storage.
Empty the pipe system before transport or storage.

Requirements

The appliance is ready to use.
The water tank has been filled.

Place a large container under the outlet system and push the milk frother down.
Press and hold the button for at least 5 seconds.
a The LED in the button flashes, and the appliance heats up.
When steam escapes from the milk frother, remove the water tank.
Allow the appliance to cool down and wait until the display shows Water tank empty”.
Use it to switch the appliance off.
Empty the water tank and the drip tray and thoroughly clean the appliance.
Disconnect the appliance from the main power supply.

You can now transport or store the appliance.
Note: The brewing unit is now secured and you cannot remove it.

Disposing of old appliance

Valuable raw materials can be reused by recycling.

Unplug the appliance from the mains.
Cut through the power cord.
Dispose of the appliance in an environmentally friendly manner.

Information about current disposal methods is available from your specialist dealer or local authority.
This appliance is labeled under European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment – WEEE).
The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.

Customer Service

Function-relevant genuine spare parts according to the corresponding Ecodesign Order can be obtained from
Customer Service for at least 7 years from the date on which your appliance was placed on the market within the European Economic Area.
Note: Under the terms of the manufacturer’s warranty the use of Customer Service is free of charge
Detailed information on the warranty period and terms of the warranty in your country are available from our aftersales service, your retailer, or on our website.
If you contact Customer Service, you will require the product number (ENr.) and the production number (FD) of your appliance.
The contact details for Customer Service can be found in the enclosed Customer Service directory or on our website.

Product number (E-Nr.) and production number (FD)

You can find the product number (ENr.) and the production number (FD) on the appliance’s rating plate.
Make a note of your appliance’s details and the Customer Service telephone number to find them again quickly.

Technical specifications

Further information and explanations are available online:

Manufactured by BSH Hausgeräte GmbH under the trademark license of Siemens AG
Valid within Great Britain:
Imported to Great Britain by
BSH Home Appliances Ltd.
Grand Union House
Old Wolverton Road
Wolverton, Milton Keynes
MK12 5PT
United Kingdom
BSH Hausgeräte GmbH
Carl-Wery-Straße 34
81739 München, GERMANY
siemens-home.bsh-group.com

Documents / Resources

| SIEMENS EQ300 Fully Automatic Espresso Machine [pdf] Instruction Manual
TF301E19, EQ300, TF30, EQ300, EQ300 Fully Automatic Espresso Machine, Fully Automatic Espresso Machine, Automatic Espresso Machine, Espresso Machine, Machine
---|---