tp-link 7106510470 Desktop PoE Switch Installation Guide

Table of Contents

tp-link-7106510470-Desktop-PoE-Switch-PRODUCT

Specifications

Installation

Ensure that the actual product matches the image shown in the user manual.
For technical support, user guides, and other information, visit https://www.tp-link.com/support . or scan the QR code provided.
Connect the power cord to the switch and plug it into a power outlet.
Connect the WAN port of the switch to your internet router using an Ethernet cable.
Connect your PC to one of the LAN ports on the switch using an Ethernet cable.

Usage

Desktop Non-PoE Switch

Connect your internet router to the WAN port of the switch.
Connect your PC or other non-PoE devices to one of the LAN ports on the switch.
Note that the LAN ports can only transmit data and do not provide power to connected devices.

Desktop PoE Switch/Outdoor PoE Switch

Connect your internet router to the WAN port of the switch.
Connect your powered devices (PD), such as IP cameras or IP phones, to the PoE-out ports or the DC port of the switch.
Ensure that the switch is connected to a Power Sourcing Equipment (PSE) device through the PoE IN port to provide power for the switch and connected devices.
Do not connect the DC port to any power source as it is a power output port.

FAQ

Can I connect non-PoE devices to the PoE ports?

Yes, you can connect non-PoE devices to the PoE ports for data transmission only. These ports do not provide power to non-PoE devices.

What is a reverse PoE switch?

A reverse PoE switch is a passive PoE switch that receives power from PoE-in ports and supplies power to connected devices through PoE-out ports or a DC port. It does not support DC or AC power input.

Do I need a PSE device for the PoE IN port?

Yes, a Power Sourcing Equipment (PSE) device needs to be connected to the PoE IN port to provide power for the switch and connected devices.

tp-link-7106510470-Desktop-PoE-Switch-FIG-2

Desktop PoE Switch/Outdoor PoE Switch

Note:

PoE ports can also connect to non-PoE devices but only transmit data.
A Reverse PoE switch is a passive PoE switch that gets power from PoE-in ports and supplies power to connected powered device(s) via PoE-out port(s) or DC port. DC port is a power output port, do not connect it to any power source.
The switch with a PoE IN port does not support DC or AC power input. A PSE device needs to be connected to the PoE IN port to provide power for the switch.

Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
Place the device with its bottom surface downward.

For indoor switch:

For outdoor switch:

Keep the device away from fire or hot environments. DO NOT immerse in water or any other liquid.

For switch powered by power adapter:

Do not use a damaged charger or USB cable to charge the device.
Do not use any other chargers than those recommended.
The adapter shall be installed near the equipment and shall be easily accessible.

For switch powered by power cord:

Plug the product into the wall outlets with an earthing connection through the power supply cord.
The plug on the power supply cord is used as the disconnect device, the socket-outlet shall be easily accessible.
The socket outlet shall be installed near the equipment and shall be easily accessible. For switch powered by USB or standard PoE:
This equipment can be powered only by equipment that complies with Power Source Class 2 (PS2) or Limited Power Source (LPS) defined in the standard of IEC 62368-1.
Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device.
Please use this product with care and operate at your own risk.

For TP-Link Branded Products Only. For the information about warranty period, policy, and procedures, please visit https://www.tp-link.com/en/support
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE (OR BY COUNTRY OR PROVINCE).
TO THE EXTENT ALLOWED BY LOCAL LAW, THIS WARRANTY AND THE REMEDIES SET FORTH ARE EXCLUSIVE AND IN PLACE OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS.
TP-Link warrants the TP-Link branded hardware product contained in the original packaging against defects in materials and workmanship when used normally in according with TP-Link’s guidelines for some period which depends on the local service from the date of original retail purchase by the end-user purchaser.
TP-Link hereby declares that the device complies with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC, 2011/65/EU, and (EU)2015/863.
The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce/
The image may differ from the actual product.
For technical support, the user guide, and other information, please visit https://www.tp-link.com/support, or simply scan the QR code.
©2023 TP-Link 7106510470 REV2.0.0