Hanwha Vision SBP-300HM7 Hanging Mount Adaptor Instruction Manual
- June 15, 2024
- Hanwha Vision
Table of Contents
Hanging Mount Adaptor
SBP-300HM7
Product Overview
SBP-300HMW7 is an adaptor used to install an LND-6010R/6020R/6030R camera in a Wall Mount Adaptor (SBP-300WMW1) or Ceiling Mount Adaptor (SBP-300CMW).
Installation Precautions
- Make sure that the installation place can endure at least 4 times of the total weight of the Hanging Mount Adaptor, Camera, and Wall/Ceiling Mount Adaptor.
- The Hanging Mount Adaptor can be also connected to 1-1/2” PF screw-thread pipe as well as to the Wall/Ceiling Mount Adaptor.
Installation
-
Insert the Hanging Mount Adaptor to 1-1/2” PF screw-thread (female) pipe or to the Wall/Ceiling Mount Adaptor (SBP-300WMW1/300CMW) and turn it clockwise to secure to the Pipe or Adaptor.
Make sure you fix the Pipe or Adaptor so that it reaches to the end of the 1-1/2” PF screw thread on the Hanging Mount Adaptor. If not secured tightly, the Hanging Mount Adaptor may loosen from the Pipe or Adaptor, causing physical damage or malfunction.
(Make sure you check the connection between two components before proceeding with the next step.) -
Install the camera on the Hanging Mount Adaptor
Make sure you insert the camera in the right direction.
Product Specifications
- Weight : 145g
- Material : Aluminum
- Operation temp. : -50°C~60°C
- Operation hum. : 0~100%
Product Outline
PT01-005167C