Dimplex LCM7520W31 Series LCM Linear Convector Baseboard User Guide

June 15, 2024
Dimplex

Dimplex LCM7520W31 Series LCM Linear Convector Baseboard

PRODUCT INFORMATION

Specifications

  1. Voltage: 240V/208V, 50/60 Hz, 1-phase
  2. Wattage: Sizes ranging from 500W to 2500W
  3. Color: White
  4. Finish: Powder coating resists fading and abrasion
  5. Construction: 22-gauge steel construction Front air intake; top warm air discharge Linear high-limit temperature control with automatic reset
  6. Heating Element: Steel sheathed element provides superior life expectancy
  7. Watt Density: Average standard watt density of 300W/ft (984W/m)
  8. Warranty: 10-year element warranty 1-year warranty on complete unit

Product Usage Instructions

Installation
The Linear convector baseboard heater requires a hard-wire installation. There are no electrical cords to trip over. Follow the steps below to install the baseboard heater:

  1. Choose a suitable location on the wall for installation.
  2. Ensure that the electrical supply matches the voltage requirements of the baseboard heater (240V/208V).
  3. Turn off the power supply to the installation area.
  4. Mount the baseboard heater securely to the wall using appropriate mounting hardware.
  5. If using a thermostat, follow the manufacturer’s instructions to install and wire the thermostat to the baseboard heater.
  6. Turn on the power supply and test the baseboard heater to ensure proper operation.

Operation
Once the baseboard heater is installed, follow these guidelines for optimal usage:

  • Ensure that the thermostat (if used) is set to the desired temperature.
  • The baseboard heater will automatically regulate its temperature based on the high-limit temperature control with automatic reset.
  • Do not cover or obstruct the air intake or warm air discharge areas of the baseboard heater.
  • Keep the surrounding area clear of any flammable materials.

Maintenance
To keep your Linear convector baseboard heater in good working condition, follow these maintenance tips:

  • Regularly clean the surface of the baseboard heater using a soft cloth and mild detergent.
  • Do not use abrasive cleaners or solvents that may damage the finish.
  • Inspect the baseboard heater for any signs of damage or wear. If any issues are detected, contact a qualified technician for repair.

FAQ

  • Can I plug the baseboard heater into an electrical outlet?
    No, the Linear convector baseboard heater requires a hard-wire installation and cannot be plugged into an electrical outlet.

  • Can I use a built-in thermostat with the baseboard heater?
    Yes, the baseboard heater is compatible with wall or top mounted built-in thermostats. Please note that the thermostat is not included with the baseboard heater and should be purchased separately.

  • What is the warranty coverage for the baseboard heater?
    The baseboard heater comes with a 1-year warranty on the complete unit and a 10-year warranty on the heating element.

  • Can the baseboard heater be used in commercial installations?
    Yes, the Linear convector baseboard heater is suitable for both residential and commercial installations.

  • How can I contact customer support for further assistance?
    For any further assistance or inquiries, you can contact Glen Dimplex Americas at 1-800-668-6663 or visit their website at www.dimplex.com.

FEATURES

  • 10-20% shorter than conventional baseboards
  • Designed to have an overall lower operating temperature, eliminating wall streaking
  • Curved edges and no spacers create a seamless and flush look against the wall; no sharp corners provide safe installation
  • Shark-fin heating element blade design provides heat transfer, quiet operation, and extends product life
  • Requires a hard-wire installation; no electrical cords to trip over
  • 2.35 inches in depth, makes LCM the lowest profile residential baseboard on the market
  • Linear high-limit temperature control with automatic reset

Specifications

  1. Voltage: 240V/208V, 50/60 Hz, 1-phase
  2. Wattage: Sizes ranging from 500W to 2500W
  3. Color: White
  4. Finish: Powder coating resists fading and abrasion
  5. Construction: 22-gauge steel construction Front air intake; top warm air discharge Linear high-limit temperature control with automatic reset
  6. Heating Element: Steel sheathed element provides superior life expectancy
  7. Watt Density: Average standard watt density of 300W/ft (984W/m)
  8. Warranty: 10-year element warranty 1-year warranty on complete unit

Ordering Guide

DIMENSIONS

ABOUT COMPANY

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Dimplex User Manuals

Related Manuals