Hanwha Vision SBP-156CMW Ceiling Mount Instruction Manual

June 15, 2024
Hanwha Vision

Hanwha Vision SBP-156CMW Ceiling Mount

Package

Hanwha-Vision-SBP-156CMW-Ceiling-Mount-fig-1

Product Features

This is a mount used to install the WN7 Wiper IR PTZ Camera on a ceiling. (For compatible models, please visit our website.)

Installation Precautions

  • Make sure that the installation place can endure at least 4 times the total weight of the Ceiling Mount and Camera.
  • This product is designed to use M5 Anchor Bolts (Nuts) for the installation.
  • For a concrete wall, it is recommended to use M5 Anchor Bolts (Nuts) along with plain and spring washers.
  • Each anchor bolt must be capable of withstanding an extraction force of 700 kg.
  • When installing the product outdoors, use interlocking devices made of stainless steel.

Installation

  1. Install the Mount Plate on a ceiling using the Anchor Bolts or Nuts (M5).
  2. Depending on some installation conditions, this product can be connected to 0.75” PF which is a screw peak processed pipe.Hanwha-Vision-SBP-156CMW-Ceiling-Mount-fig-3
  3. Hang the safety wire up on a hook that looks like an arrow in the Mount PlateHanwha-Vision-SBP-156CMW-Ceiling-Mount-fig-4
  4. Pull out the network cable through the rear of the Ceiling Mount in to the pipe.
  5. Attach the Ceiling Mount on the Mount Plate using the screw bit included.
  6. Loosen the 2 screws shown in the figure below to adjust the length of the Ceiling Mount.
  7. After adjusting the length, tightly fasten the screw to secure it.
  8. After aligning the installation direction guides of the camera and Ceiling Mount, push the main cover upward and turn it counterclockwise until it is secured.
  9. Install the camera according to the camera’s installation guide.
  10. Tightly fasten the 3 mounting screws on the Ceiling Mount
  11. Using the Hex. L Wrench, loosen the screw shown in the figure below to adjust the direction of the camera.
  12. After adjusting the direction, tightly fasten the screw to secure it.
  13. The Ceiling Mount contains a Hanging Mount. You can remove the Hanging Mount to use it separately, or you can install another mount or camera that has a screw thread of 1.5″ PF to the Ceiling Mount.

Product Specifications

Product Overview

Hanwha-Vision-SBP-156CMW-Ceiling-Mount-fig-11

PT01-0056

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Hanwha Vision User Manuals

Related Manuals