Hanwha Vision SHD-1408FW In Ceiling Housing Installation Guide

Hanwha Vision SHD-1408FW In Ceiling Housing

Product Information

Product Specifications

• Item: In-ceiling Housing
• Model: SHD-1408FW
• Dimension (mm): Not specified
• Weight: Not specified
• Temperature: Not specified
• Material: PC
• Color: White

Overview

The In-ceiling Housing is an adapter designed to mount a dome/vandal camera in built-in style on a dropped ceiling.

What’s Included

• In-ceiling Housing
• Safety Bracket (1EA)
• Safety Wire (1SET)
• Template (1EA)
• M3 x L10 screws: 3EA
• M4 x L13 screws: 5EA
• Camera Mount Bracket
• Installation Manual

Installation Instructions

Installation Position and Weight Endurance

Select an installation position or place that can endure more than 5 times the total weight of the installation structure.

Spare Height Requirement

At least 250mm or more of spare height is required above the ceiling board.

Safety Wire Installation

Be sure to secure the safety wire to avoid a product fall.

Mount Bracket and Camera Installation

Use the provided screws to install the mount bracket and camera.

Installation Steps

• Attach the installation template to the ceiling and mark its location with a pencil.
• Attach the mount template to a surface you want and drill holes.
• Install the camera mount bracket in the housing using M4 x L13 screws.
• Fix the anchor bolt onto the concrete ceiling, and secure the safety wire to the anchor bolt.
• Pass the external cable through the hole in the center of the housing.
• Push the housing inside the ceiling through the ceiling hole and tighten the screws clockwise to fix the housing on the ceiling.
• Connect the cable to the camera.
• Install the camera in the mount bracket using appropriate screws.
• Mount the case top into the housing using the specified screws.

FAQ

Q: What is included in the product package?

A: The product package includes the in-ceiling housing, safety bracket, safety wire, template, screws, camera mount bracket, and installation manual.

Q: What is the spare height requirement for installation?

A: At least 250mm or more of spare height is required above the ceiling board.

SHD-1408FW

OVERVIEW

In-ceiling Housing is an adapter designed to mount a dome/vandal camera in built-in style on a dropped ceiling.

WHAT’S INCLUDED

INSTALLATION INSTRUCTIONS

1. Select an installation position or place that can endure more than 5 times of the total weight of the installation structure.
2. At least 250mm or more of spare height is required above the CEILING BOARD.
3. Be sure to secure the SAFETY WIRE to avoid a product fall.
4. Use the provided screws to install the mount bracket and camera.

INSTALLATION

1. Attach the installation template to the ceiling and mark its location with a pencil.

2. Attach the mount template to a surface you want and drill holes.

3. Install the camera mount bracket in the housing.

When installing the camera mount bracket, make sure the guided holes in the housing are appropriate for the camera size.

4. Fix the ANCHOR BOLT onto the concrete CEILING, and secure the SAFETY WIRE to the ANCHOR BOLT as below:

5. Tighten the nut (“N1”) on the ANCHOR BOLT.

6. Insert the provided SAFETY BRACKET into the ANCHOR BOLT.

7. Tighten two nuts (“N2”,”N3”) onto the ANCHOR BOLT.

8. Hook and fix one end of the SAFETY WIRE onto the SAFETY BRACKET.

9. Hook and fix the other end of SAFETY WIRE onto the HOUSING as shown below.

10. For connection with the camera, pass the external cable through the hole in the center of the housing as shown below.

See the Installation Manual for your camera to prepare a connection cable for the camera.

6. Push the HOUSING inside the CEILING through the CEILING hole, and tighten the SCREWs (x2) clockwise to fix the HOUSING on the CEILING.
   (The BRACKET will be positioned from to as shown.)
   Ensure that the HOUSING is firmly secured to the CEILING BOARD.

7. Connect the cable to the camera.
   See the Installation Manual for your camera to connect the cable.

8. Install the camera in the mount bracket.
   Make sure the guided holes in the mount bracket are appropriate for the camera size.
   For the installation, use screws that fit the guided holes in the mount bracket.

9. Mount the case top into the housing.