Hanwha Vision SBP-300TM1 Hanging Tilting Mount Adaptor Instruction Manual
- June 15, 2024
- Hanwha Vision
Table of Contents
Hanwha Vision SBP-300TM1 Hanging Tilting Mount Adaptor
Product Specifications
| Product | Model | Package Contents |
|---|---|---|
| Hanging/Tilting Mount Adaptor | SBP-300HM5 | HANGING MOUNT ADAPTOR, SCREW 3EA |
| Tilting Mount Adaptor | SBP-300TM1 | TILTING MOUNT ADAPTOR, SCREW 3EA |
Product Overview
The Hanging/Tilting Mount Adaptor (SBP-300HM5 and SBP-300TM1) is a versatile mounting solution for cameras. It is compatible with various camera models and can be used for hanging or tilting installations. The package includes the necessary screws for installation.
Installation Precautions
- Make sure that the installation place can endure at least 4 times the total weight of the Hanging Mount Adaptor, Camera, and Wall/Ceiling/Parapet Mount Adaptor.
- The Hanging Mount Adaptor can be connected to a 1-1/2 PF screw-thread pipe or the Wall/Ceiling/Parapet Mount Adaptor.
Installation (SBP-300HM5)
- Insert the Hanging Mount Adaptor into a 1-1/2 PF screw-thread (female) pipe or the Wall/Ceiling/Parapet Mount Adaptor (SBP-300WM or 300WM1/300CM/300LM). Turn it clockwise to secure it to the Pipe or Adaptor.
- Make sure you fix the Pipe or Adaptor tightly so that it reaches the end of the 1-1/2 PF screw thread on the Hanging Mount Adaptor. Loose connections may cause physical damage or malfunction. Double-check the connection before proceeding with the next step.
Installation (SBP-300TM1)
- Install the Tilting Mount Adaptor onto the camera. Make sure to insert the Adaptor in the correct direction.
- Install the Hanging Mount Adaptor onto the camera. Make sure to insert the Adaptor in the correct direction.
Frequently Asked Questions
-
Q: Can I use the Hanging/Tilting Mount Adaptor with any camera model?
A: The Hanging/Tilting Mount Adaptor is compatible with various camera models. However, please refer to the product manual or contact support for specific compatibility information. -
Q: How do I ensure a secure installation?
A: Make sure to follow the installation precautions and double-check all connections before proceeding. Ensure that the installation place can support the weight and fix the components tightly to avoid any issues.
Package
Product Overview
SBP-300HM5 is an adaptor used to install an SNF-8010, or SNF-8010V camera in a Wall Mount Adaptor (SBP-300WM or SBP-300WM1), Ceiling Mount Adaptor (SBP- 300CM), or Parapet Mount Adaptor(SBP-300LM). SBP-300TM1 is an adaptor used to install an SNF-8010 or SNF-8010V camera on the ceiling or wall by tilting it slightly(20°).
Installation Precautions
- Make sure that the installation place can endure at least 4 times of the total weight of the Hanging Mount Adaptor, Camera, and Wall/Ceiling/Parapet Mount Adaptor.
- The Hanging Mount Adaptor can be also connected to 1-1/2” PF screw-thread pipe as well as to the Wall/Ceiling/Parapet Mount Adaptor.
Installation
(SBP-300HM5)
-
Insert the Hanging Mount Adaptor to 1-1/2” PF screw-thread (female) pipe or to the Wall/Ceiling/Parapet Mount Adaptor (SBP-300WM or 300WM1/300CM/300LM) and turn it clockwise to secure to the Pipe or Adaptor.
Make sure you fix the Pipe or Adaptor so that it reaches to the end of the 1-1/2” PF screw thread on the Hanging Mount Adaptor. If not secured tightly, the Hanging Mount Adaptor may loosen from the Pipe or Adaptor, causing physical damage or malfunction.
(Make sure you check the connection between two components before proceeding with the next step.) -
Install the Hanging Mount Adaptor onto the camera.
Make sure you insert the Adaptor in the right direction.
Installation
(SBP-300TM1)
- Install the Tilting Mount Adaptor onto the camera.
Make sure you insert the Adaptor in the right direction.
Product Specifications
- Weight : SBP-300HM5 : 200g SBP-300TM1 : 115g
- Material : SBP-300HM5 : Aluminum SBP-300TM1 : Plastic
- Operation temp. : -50°C~60°C
- Operation hum. : 0~100%
Product Outline
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>