PROZOR AC3 Optical Audio Splitter User Manual
- June 15, 2024
- PROZOR
Table of Contents
PROZOR AC3 Optical Audio Splitter
Dear Customer
Thank you for purchasing the SPDIF/TOSLINK Digital Optical Audio 1×3 Splitter, for optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.
Introduction
This SPDIF/Toslink Digital Optical Audio Splitters can let the users to connect and distribute one digital optical Toslink source to three optical Toslink (SPDIF) inputs on your AV amplifier
FEATURES
- One way of optical fiber signal input splitter to three sets of SPDIF/Toslink signal receiving device
- Audio format support: LPCM2.0/DTS/Dolby-AC3
- Support signal retiming
- Use optical fiber cable that losses less than 0.2dB/m, Output distance is up to 40m
- Over-voltage protection can prevent the damage caused by connecting unmatched to the machine
- No loss of quality
- Installs in minutes
SPECIFICATIONS
| Support audio format | LPCM2.0/DTS/Dolby-AC3 |
|---|---|
| Peak wavelength | 650nm |
| Max baud rate | 16Mbps |
| Output cable distance | ≤40m(Use the optical fiber cable that losses less than |
0.2dB/m)
Power Supply| USB Power Cable
Operating Temperature range| (0 to 40℃)
Operating Humidity range| 5 to 90％RH(No condensation)
PACKAGE CONTENTS
- Main unit
- USB Power Cable
- User Manual
Panel Descriptions
Connection and Operation
NOTE:
- If no sound output:
- Check the signal receiving equipment and the machine connected are in good condition.
- To check if the signal source is on and well connected.
- Check the system connection quality.
- Check if the line is all quality.
- If sound interrupted, please try again to connect the cable to be free from the unsuccessful connection.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>