Hanwha Vision SBP-125HMW Hanging Mount Instruction Manual

Hanwha Vision SBP-125HMW Hanging Mount

Package

• HANGING MOUNT
  

• SCREW 2EA

Product Overview

SBP-125HMW is a mount used to install an QNE-8011R(or QNE-8021R, SBV-125BW) camera in a Wall Mount (SBP-300WM or SBP-300WM1), Ceiling Mount (SBP-300CM), or Parapet Mount (SBP-300LM).

Installation Precautions

• Make sure that the installation place can endure at least 4 times of the total weight of the Hanging Mount, Camera, and Wall/Ceiling/Parapet Mount.
• The Hanging Mount can be also connected to 1-1/2” PF screw-thread pipe as well as to the Wall/Ceiling/Parapet Mount.

Installation

1. Insert the Hanging Mount to 1-1/2” PF screw-thread (female) pipe or to the Wall/Ceiling/Parapet Mount (SBP-300WM or 300WM1/300CM/300LM) and turn it clockwise to secure to the Pipe or Mount.
   

   •  Make sure you fix the Pipe or Mount so that it reaches to the end of the 1-1/2” PF screw thread on the Hanging Mount. If not secured tightly, the Hanging Mount may loosen from the Pipe or Mount, causing physical damage or malfunction.
     (Make sure you check the connection between two components before proceeding with the next step.)
     (Mounting the camera directly)

2. Install the camera onto the Hanging Mount

   • Make sure you insert the Mount in the right direction.
     
     
     (Mounting the camera with a Backbox)
   1. Install the Backbox onto the Hanging Mount.
   • Make sure you insert the Mount in the right direction.
     
   2. Assemble the camera to the Backbox.
      

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>