Hanwha Vision SHD-1128FPW In Ceiling Housing User Manual
- June 15, 2024
- Hanwha Vision
Table of Contents
Hanwha Vision SHD-1128FPW In Ceiling Housing
Package
Product Features
This In-Ceiling Housing is a mounting adaptor that is designed to mount the dome camera in a built-in style on a double-layer ceiling. (For compatible models, please visit our website.)
Installation Precautions
- Select an installation position or place that can endure more than 4 times the total weight of the installation structure.
- At least 250mm or more of spare height is required above the CEILING BOARD.
- Be sure to secure the SAFETY WIRE to avoid a product fall.
- Use the provided screws to install the mount bracket and camera.
- CEILING BOARD must be able to sustain the weight of at least 10 kg.
Installation
- Attach the TEMPLATE on the CEILING BOARD and drill a guided hole.
- Use a Phillips head screwdriver to detach the mount bracket from the housing.
- After checking the hole size to use, remove the cap and the hex nut.
Mounting combination table
When mounting the camera to the housing, refer to the mounting combination table shown below:
- A/B/C/D/E: housing assembly hole
- / /: Camera installation assembly hole
- 1/2/3: case top number
You can also scan the QR code on your product to see this mounting combination table online. Use a Phillips head screwdriver to join the mount bracket to the housing. Make sure to check the mount bracket’s camera installation assembly hole and mount assembly hole. When installing the mount bracket, align the alphabet letter to the installation direction guides of the housing before installing it.
Fix the ANCHOR BOLT onto the concrete CEILING, and secure the SAFETY WIRE to the ANCHOR BOLT as below:
- Tighten the NUT (“N1”) on the ANCHOR BOLT.
- Insert the provided SAFETY BRACKET into the ANCHOR BOLT.
- Tighten two NUTs (“N2”,” N3”) onto the ANCHOR BOLT.
- Hook and fix one end of the SAFETY WIRE onto the SAFETY BRACKET.
- Hook and fix the other end of SAFETY WIRE onto the HOUSING as shown below:
The ANCHOR BOLTs and nuts are optional and not included in the product package.
- ANCHOR BOLTS must be able to sustain a weight of at least 30 kg.
- If you proceed without following the instructions in the manual, that is if you work with the camera body already attached from the beginning, the safety wire could exceed its limit and be broken when the housing is accidentally dropped, which could result in an accident.
- Push the HOUSING inside the CEILING through the CEILING hole, and tighten the SCREWs (x2) clockwise to fix the HOUSING on the CEILING.
- (Adjust the height of the bracket to secure the housing to the ceiling.)
Using a power tool for installation could cause product damage. If you are going to use a power tool, the torque must be 30 Nm or less. Ensure that the HOUSING is firmly secured to the CEILING BOARD. Use the provided L16 machine screws to join the camera to the mount bracket inside the housing.
When mounting the camera, refer to the mounting combination table to select the mounting holes appropriate to the camera size. attach the CASE TOP to the HOUSING, and tighten the 2 SCREWS on the COVER to fix it to the HOUSING. Refer to the mounting combination table to use the case top appropriate to the dome cover size of the camera. To know the type of the case top, please check the number marked inside. 9 Insert the SCREW CAPS into the screw holes.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>