Qsee QTH44 Digital Video Rrcorder DVR User Guide

Qsee QTH44 Digital Video Rrcorder DVR

What’s Include?

Note: -Pre-installed 1/2/3 TB hard disk or not in DVR depend on model No.

After unboxing, check that the console is intact and fully equipped.

DVR Introduction

NOTE:

• The actual appearance and components may vary with different model of product.

Set Up DVR

Set up your device as per the quick set up guidance below

• Connect the DVR (LAN port) to your router with an ethernet cable and connect the mouse to the USB port of the DVR
• Connect the DVR to the monitor with a VGA or HDMI cable .

NOTE: There is no VGA cable included in the package .

Connect the cameras to DVR with BNC cable.

• Power on the split power cable and connect to DC12V IN interface of BNC cable;
• Connect the BNC cable to VIDEO IN interface of DVR;
• Connect the camera to BNC cable;

Connect the DVR to a power adapter.

NOTE: Refer to D @QSEESECURITY to check more set up details.

Connection Diagram

Do not install the camera near high voltage sources or other sources of electrical interference, otherwise the video signal may be poor.

NOTE:
The above diagram is only for connection guidance, part of the accessories are not included in the box.

DVR Setting

• Login and follow the instructions

NOTE:
The password should be at least 6 characters.

• Network Settings
  Before set up the access control please make sure the device is connected to network. For Network Settings page, please go through Main Menu>Network>Network Settings:

• Choose the “DHCP Enable” (Default) or enter your personal IP address.

NOTE:
lf you encounter any troubles in product information, product installation and use, please email us at [email protected] or refer us to our website www.q-see.com

Access DVR Via PC or Smartphone

Download and launch the Qsee App or Client software and follow the instructions to access the DVR

On PC

1. Copy the device IP Address and open it in your browser and follow the instructions to access remotely.
2. Download path: Go to www.q-see.com >Support> APP&CUent download.
   • On Smartphone

Scan to download the Qsee App.

Device Connection

• A. Register and login your account

• B. Click “ “

• C. Select ” ” or select “DVR” and click Wired.

• D. Scan the QR code on the DVR from the App and wait for the configuration.
  NOTE
  If you are not able to find the QR code on DVR, click the Cloud ID number seen on the right top of the monitor screen and then scan the QR code to bind with App.

• E. Live Preview
  Learn more: www.q-see.com/pages/download

Specifications

DVR

FAQ’s

Q: No video output on the monitor/TV
If there’s no video output on the monitor from Qsee DVR, please try the following solutions:

• Make sure your DVR/TV is powered on.
• Double check the HDMINGA Connection, or swap another cable or monitor to test.

Q: Failed to access the DVR locally
If you failed to access the Qsee DVR locally via mobile phone or PC, please try the following solutions:

• Connect the DVR (LAN port) to router with a network cable.
• Swap another ethernet cable or plug the DVR to other ports on the router.
• Go to Mainmenu>system>Restore>click Select all and ok button and restart by manual.

FAQ’s

Can I add a different camera to this system?

Yes. You can add any Qsee analog cameras to the system. However, we don't recommend you add third-party cameras.

How long can I record with this Qsee security system?

Different pixel cameras in different dynamic and static monitoring environment, the storage time is different. It depends on the actual situation.

Can it work without Internet?

Yes. All the Qsee systems can work offline. However, under such a situation, you will be unable to access the system remotely with our App.

Can I connect and record to a portable USB hard drive?

No, your DVR will only record to the internal hard drive that is installed.

Notification of Compliance

FCC statement
This device complies with Part 15 of FCC rules. Operation is subject to the con­dition that this device may not cause harmful interference.

NOTE:- This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a res­idential installation.

CE Declaration
Qsee declares that this device in compliance with essential requirements and other relevant provisions of EMC directive 2014/30/EU.

RoHS CompUance declaration
Qsee products delivered to our customers confirm to the RoHS requirements, in which six banned substances are not detected or are under the limitation. The Restriction of Hazardous Substances Directive (EU) 2015/863 and (EU)2017 /2102 amending Annex II to Directive 2011/65/EU. This declaration is based on Qsee’s understanding of the RoHS directive and knowledge of the ma­terials that go into products.

Warranty

This product comes with a 2-year warranty, under certain conditions. Learn more :www.q-see.com/policies/refund-policy

NOTE:
If you are not satisfied with the new Qsee product purchase, we sug­gest you to reset the camera and return it under specific conditions.

Terms and Privacy
Use of the product is subject to your agreement to the terms of service and pri­vacy policy at www.q-see.com. Keep out of reach of children.
End User License Agreement
By using the product software that is embedded in the Qsee product, you agree to the terms of this end user license agreement between you and Qsee. Learn more: www.q-see.com/policies/terms-of-service

Technical Support
If you need any techinical help, please visit our official support site and contact our support team before returning the products.
Email: [email protected]
Web: www.q-see.com

Congratulations !

Your security camera is ready to use.
Thank you for choosing Qsee as your security partner.

Want to know more about Qsee products?

www.q-see.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>