Lumens VS-KB30 Compact IP Camera Controller User Manual

: June 15, 2024
: Lumens

Table of Contents

Lumens VS-KB30 Compact IP Camera Controller
Product Information
Product Usage Instructions
System Requirements
Connecting to Internet
Operation Interface Description
Troubleshooting
Copyright Information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Lumens VS-KB30 Compact IP Camera Controller

Product Information

Specification

Operating System Requirements :
- Windows : Support OS
- MAC : Support OS
System Hardware Requirements :
- CPU
- Memory
- Free Disk Space
- Ethernet

Product Usage Instructions

Chapter 2: Connecting to Internet
Make sure the computer and the Cameras are connected in the same network segment.
PC (with Camera Controller) Camera Camera Camera

Chapter 3: Operation Interface Description

Section 3.1: Login Screen

Username/ Password : Please enter user account/password (default: admin/admin)
Remember me : Save username and password. When you log in next time, there is no need to re-enter them.
Forgot Password : Enter the email address you entered when registered to reset your password.
Language : Change the language of the software interface. English, Traditional Chinese, and Simplified Chinese are available.
Log in : Log into the administrator screen on the website.

Section 3.2: Device Management – Device List

Layout List : Display split layout (1/4/9/16)
Group List : Filter groups
Device List : Filter devices
Preview Screen : The preview screen is displayed when the camera is online, and the icon is displayed according to the status when the camera is offline
PTZF :
- Pan/Tilt setting : Adjust the Pan/Tilt position of the camera screen
- AF/MF : Switch AF/MF
- Focus +/ -: Turn on manual focus to adjust the focal length
- Pan/Tilt speed : Adjust Pan/Tilt Speed
- Zoom : Zoom In/Zoom Out ratio
- Zoom speed : Adjust the zoom speed
- Mirror / Flip : Set image mirroring/flip (Only MAC is available)
Preset :
- Preset : Click to load the preset
- Display Page of Presets : Switch the display page of presets (9 presets are displayed on each page)
- Preset Support : Windows 1~255/ MAC: 1~90
- Settings : Click Set and press the number to save the preset
- Reset : Click Reset and press the number to clear the preset
Tracking Control :
- Auto Tracking/ Smart viewfinder (Select one only)
- Auto Tracking :
- Start/ Stop Auto Tracking
- Mode : Set the Tracking Mode (Everywhere/ Stage/ Partition)
- Sensitivity : Set tracking sensitivity
- Auto Framing :
- Start/ Stop Smart viewfinder
- Correction : Return to wide-angle end for correction
- Sensitivity : Set detection sensitivity
Software Information : Displaying information, such as software version, Lumen website link, service support
Logout : Return to the login page

Section 3.3: Management – Device

Discovery : Search Device
Add/ Edit/ Delete: Add/ edit/ delete cameras. The list will be updated after saving.
Keyword Search : Enter keywords to search for devices in the list
Power on : Check the camera in the list to turn it on
Stand By : Check the camera in the list to set it into standby
Reboot : Check the camera in the list to reboot it
Reset : Check the camera in the list to do a factory reset
Device List : Display the list of found devices

Frequently Asked Questions (FAQ)

Q: What are the system requirements for the Camera Controller?
A: The Camera Controller supports Windows and MAC operating systems. Please refer to the specifications section for detailed requirements.
Q: How do I connect the Camera Controller to the internet?
A: Make sure the computer and the Cameras are connected in the same network segment.
Q: How do I log in to the Camera Controller?
A: On the login screen, enter your username and password. The default username and password are “admin/admin”. You can also choose to save your username and password for future logins.
Q: How can I change the language of the software interface?
A: On the login screen, you can change the language by selecting from the available options: English, Traditional Chinese, and Simplified Chinese.
Q: How do I manage devices in the Camera Controller?
A: In the Device Management section, you can add, edit, or delete cameras. You can also search for devices using keywords and perform actions like turning them on, setting them into standby, rebooting, or doing a factory reset.

System Requirements

Operating System and System Hardware Requirements

Windows

Item	Requirements
Support OS	Windows 7/ 10/ 11
CPU	Intel® Core™ i5 (7th gen and above) or later, or equivalent AMD CPU
Memory	DRAM: 8GB above
Free Disk Space	10 GB free disk space for installation
Ethernet	100 Mbps network card

MAC

Item	Requirements
Support OS	macOS version 10.12 above / 11 / 12
CPU	Intel® Core™ i5 (7th gen and above) or later, or M1 series
Memory	DRAM: 8GB above
Free Disk Space	10 GB free disk space for installation
Ethernet	100 Mbps network card

Connecting to Internet

Make sure the computer and the Cameras are connected in the same network segment.

Operation Interface Description

Login Screen

No| Item| Function Descriptions
**1| ** Username/ Password| Please enter user account/password (default: admin/admin) ****

< Remark> For initial login, you need to enter a new account, password and email address to create account information

2| Remember me| Save username and password. When you log in next time, there is no need to re-enter them
3| Forgot Password| Enter the email address you entered when registered to reset your password
4| Language| Change the language of the software interface. English, Traditional Chinese, and Simplified Chinese are available
5| Log in| Log into the administrator screen on the website

Device Management – Device List

Pan/Tilt setting : Adjust the Pan/Tilt position of the camera screen
AF/MF : Switch AF/MF
Focus +/- : Turn on manual focus to adjust the focal length
Pan/Tilt speed : Adjust Pan/Tilt Speed
Zoom : Zoom In/Zoom Out ratio
Zoom speed : Adjust the zoom speed
Mirror / Flip : Set image mirroring/flip (Only MAC is available)

**6**

| ****

**** Preset

| ****

Preset : Click to load the preset
Display Page of Presets : Switch the display page of presets (9 presets are displayed on each page)
Preset Suppor t: Windows 1~255/ MAC: 1~90
Settings : Click Set and press the number to save the preset
Reset : Click Reset and press the number to clear the preset

---|---|---
**7| ** Tracking Control| ** < Remark> **Auto Tracking/ Smart viewfinder (Select one only)

Auto Tracking: Start/ Stop Auto Tracking
- Mode : Set the Tracking Mode (Everywhere/ Stage/ Partition)
- Sensitivity : Set tracking sensitivity
Auto Framing: Start/ Stop Smart viewfinder
- Correction : Return to wide-angle end for correction
- Sensitivity : Set detection sensitivity

8| Software Information| Displaying information, such as software version, Lumen website link, service support
9| Logout| Return to the login page

Management – Device

Management – Group

Search a camera name or IP address
Group Name: The group name can be changed
Display devices not added in the group
Display the devices already added in the group
Add Devices: Add the selected cameras in the left list to the group
Delete the device: Remove the selected cameras in the right list from the group
Storage Setting: Save list setting
Exit Page: Leave the edit page

6	Delete	Remove the selected group

Function Descriptions
Add/ Edit the username and change the password

Username: Support 5 – 30 characters
Password: Support 5 – 32 characters

< Remark> You can use uppercase and lowercase letters, numbers for characters; other special symbols will not be used

Settings

The following functions are supported by hot keys

Pan/ Tilt
Zoom In / Zoom Out
Preset Load

< Remark>Only MAC is available

**4**| User Experience Improvement Plan Notice| Click the hyperlink to display the content of User Experience Improvement Plan

Troubleshooting

This chapter describes problems you may encounter while using Camera Controller. If you have questions, please refer to related chapters and follow all the suggested solutions. If the problem still occurred, please contact your distributor or the service center.

No.	Problems	Solutions
1.	Unable to search devices	Please make sure that the computer

and the Cameras are connected in the same network segment. (Please refer to Chapter 2 Connecting to Internet )
2.| Live image delay| Please refer to Chapter 1 System Requirements to make sure the matched PC meets the specifications
3.| The operating steps in the manual are not consistent with the software operation| The software operation may be different from the description in the manual due to functional improvement. Please make sure you’ve updated your software to the latest version.

¡ For the latest version, please go to the Lumens official website > Service Support > Download Area. https:// www.MyLumens.com/support

Copyright Information

Copyrights © Lumens Digital Optics Inc. All rights reserved.
Lumens is a trademark that is currently being registered by Lumens Digital Optics Inc.
Copying, reproducing or transmitting this file is not allowed if a license is not provided by Lumens Digital Optics Inc. unless copying this file is for the purpose of backup after purchasing this product.
In order to keep improving the product, the information in this file is subject to change without prior notice.
To fully explain or describe how this product should be used, this manual may refer to names of other products or companies without any intention of infringement.
Disclaimer of warranties : Lumens Digital Optics Inc. is neither responsible for any possible technological, editorial errors or omissions, nor responsible for any incidental or related damages arising from providing this file, using, or operating this product.