Hanwha Vision SBV-125BW Backbox for Flateye Cameras User Guide
- June 15, 2024
- Hanwha Vision
Table of Contents
Hanwha Vision SBV-125BW Backbox for Flateye Cameras
Product Information
Specifications
- Product Name : SBV-125BW
- Supported Product : QNE-8011R/8021R (models can be added without notice)
- Color / Material : White / Aluminum
- RAL Code : RAL9003
- Weight : 345 g (0.76 lb)
Product Features
This product is an adaptor used to install cameras in the electric gang box
or on the wall or ceiling.
Product Overview
The SBV-125BW is a camera adaptor designed for installation in electric
gang boxes, walls, or ceilings.
Product Usage Instructions
Installation Precautions
Please ensure that you install the product on an area that is strong enough
to support more than 4 times the total weight of the product and the camera.
Depending on the installation conditions, this product can be connected to a
0.75 PF screw peak processed pipe.
Installation
- Remove the cap-bolt in the selected direction before inserting the pipe.
- Install the Backbox on the desired position, considering the pipe insertion direction.
- Attach the case-bottom to the Backbox.
FAQ
-
What is the purpose of this product?
This product is an adaptor used to install cameras in electric gang boxes, walls, or ceilings. -
What are the installation precautions?
Ensure that the installation area is strong enough to support the weight of the product and camera. Additionally, consider the pipe insertion direction and connect the product to a suitable screw peak processed pipe. -
Can other camera models be supported?
Yes, other camera models can be supported. Please note that additional models may be added without notice.
Product Features
This product is an adaptor used to install cameras in the electric gang box or on the wall or ceiling.
Installation Precautions
Please make sure to install on an area which is strong enough to support
more than 4 times of the total weight of this product and the camera.
Depending on some installation conditions, this product can be connected to
0.75” PF which is a screw peak processed pipe.
What’s included
Installation
- Install the Backbox on a desired position.
- Remove the cap-bolt in the selected direction before inserting the pipe. However, take into consideration the pipe insertion direction. There are two directions available for inserting the pipe.
- Attach the case-bottom to the Backbox.
Specification
| Product Name | SBV-125BW |
|---|---|
| Supported product | QNE-8011R/8021R |
- models can be added without notice
Color / Material| White / Aluminum
RAL Code| RAL9003
Product dimensions / weight| Ø128.95 x 40 mm (Ø5.08 x
1.57″), 345 g (0.76 Ib)
Product Overview
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>