DOMETIC L-20 NDS Power and Control 3 lion Instruction Manual

DOMETIC L-20 NDS Power and Control 3 lion

Copyright
© 2023 Dometic Group. The visual appearance of the contents of this manual is protected by copyright and design law. The underlying technical design and the products contained herein may be protected by design, patent or be patent pending. The trademarks mentioned in this manual belong to Dometic Sweden AB. All rights are reserved.

Product Information

Specifications

• Model: POWER & CONTROL 3LION
• Available Models: L-20, L-30, L-60, L-100B, L-150-P, 3L-100B, 3L-150-P
• Languages: English, German, French, Spanish, Portuguese, Italian, Dutch, Danish, Swedish, Norwegian, Finnish, Polish, Slovak, Czech, Hungarian, Croatian, Turkish, Slovenian, Romanian ,Bulgarian, Estonian, Greek, Lithuanian, Latvian

Product Usage Instructions

Important Notes
Before using the product, please read and follow these important notes:

1. Ensure that the mechanical and electrical installation and setup of the device are performed by a qualified technician.
2. The technician must have knowledge related to automotive equipment and installations and be familiar with the applicable regulations in the country of installation.
3. The technician should have received safety training to identify and avoid potential hazards.

Please read these instructions carefully and follow all instructions, guidelines, and warnings included in this product manual in order to ensure that you install, use, and maintain the product properly at all times. These instructions MUST stay with this product. By using the product, you hereby confirm that you have read all instructions, guidelines, and warnings carefully and that you understand and agree to abide by the terms and conditions as set forth herein. You agree to use this product only for the intended purpose and application and in accordance with the instructions, guidelines, and warnings as set forth in this product manual as well as in accordance with all applicable laws and regulations. A failure to read and follow the instructions and warnings set forth herein may result in an injury to yourself and others, damage to your product or damage to other property in the vicinity. This product manual, including the instructions, guidelines, and warnings, and related documentation, may be subject to changes and updates. For up-to-date product information, please visit documents.dometic.com.

Related documents

Find the installation and operating manual online on https://documents.dometic.com/?object_id=88312.

Safety Instructions **

**

Follow these safety instructions while using the product:

• Avoid touching sharp edges on the device.

WARNING: Failure to obey these warnings could result in death or serious injury.

• In event of fire, use a fire extinguisher which is suitable for electrical device.
• Do not operate the device if it is visibly damaged.

CAUTION: Failure to obey these warnings could result in death or serious injury.

• Installation, assembly, and wiring as well as all other work may only be performed by qualified electrical specialists. Inadequate repairs may cause serious hazards.
• Installation in potentially explosive areas such as rooms with inflammable liquids or gases is not per-mitted.
• Do not install or keep the device near flames or other heat sources (heating, direct sunlight, gas ovens etc.).
• Children shall not play with the appliance.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been giv-en supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.

NOTICE: Indicates a situation that, if not avoided, can result in property damage.

• Check that the voltage specification on the data plate corresponds to that of the energy supply.
• Never immerse the device in water.
• Protect the device and cables against heat and moisture.
• Do not expose the device to rain.
• Make sure that the mounting surface is capable of supporting the weight of the device.
• Lay the cables so that they cannot be tripped over or damaged.
• Use ductwork or cable ducts if it is necessary to lay cables through metal panels or other panels with sharp edges.

Intended use

The battery is intended to provide energy to the appliances and equipment in a motorhome. The battery is intended to be used with 12 V electrical systems. The control unit optimizes the operation of the battery in a motorhome. The display provides information about the operation of the system. This product is only suitable for the intended purpose and application in accordance with these instructions.
This manual provides information that is necessary for proper installation and/or operation of the product. Poor in-stallation and/or improper operating or maintenance will result in unsatisfactory performance and a possible failure.

The manufacturer accepts no liability for any injury or damage to the product resulting from:

• Incorrect assembly or connection, including excess voltage
• Incorrect maintenance or use of spare parts other than original spare parts provided by the manufacturer
• Alterations to the product without express permission from the manufacturer
• Use for purposes other than those described in this manual

Dometic reserves the right to change product appearance and product specifications.

Target group
The mechanical and electrical installation and setup of the device must be performed by a qualified tech-nician who has demonstrated skill and knowledge related to the construction and operation of automotive equipment and installations, and who is familiar with the applicable regulations of the country in which the equipment is to be installed and/or used, and has received safety training to identify and avoid the hazards involved.

Operation **

**

To operate the product:

1. Make all necessary connections.
2. The system will start up and display various screens for setting system parameters.
3. Follow the instructions on the display to set the desired parameters:
   • Language settings: Select the desired language by tapping the circle next to the flag.
   • Alternator settings: Select whether the vehicle is equipped with a smart alternator or not.
   • D+ signal settings: Select whether the D+ signal is connected to the control unit or not.
   • Date settings: Enter the day, month, and year using the + and -buttons.
   • Time settings: Enter the hours and minutes using the + and – buttons. Press the home button to confirm the changes.
4. Once the settings are confirmed, the main menu will appear on the display.

Settings (3L-100B, 3L-150-P only)
Immediately after all connections have been made, the system starts up and the display shows several screens for set-ting the system parameters.

Main Menu (3L-100B, 3L-150-P only)
The main menu provides the following options:

• Display On/Off button: Tap any part of the display to turn it on if it’s off.
• Starter battery icon: Displays starter battery voltage.
• House battery menu: Provides information about the state of charge (SOC) of the house battery (Note: SOC indication may be inaccurate after installation and becomes operational after the first complete charging of the house battery).

After the settings are confirmed, the main menu appears on the display.

turn it on.
2| Setting menu
3| Starter battery icon. It displays starter battery voltage.
4| House battery menu

Note The state of charge (SOC) indication is inaccurate following the installation. It becomes operational after the first complete charging of the house battery.

House battery menu (3L-100B, 3L-150-P only)

The negative current value means that the battery is discharging and a positive value indicates that the battery is charging. In the latter case, the thunderbolt symbol is displayed on the battery icon.

• To keep V and I values displayed, tap the “Setting” icon and check the phrase “Always show V and I”.

| (Grey) Alternator not charging the battery.
| (Red) Alternator is charging the battery.
---|---

Note: In order to keep the battery from discharging, the display dims after 2 min. After 15 min, it will turn off. To turn the display back on and resume normal use, tap on it.

General protection
The control unit protects the house battery against excessive discharging and overloads. However, it is recommend-ed that the house battery voltage does not fall below 10.5 V and does not exceed 15 V. If the house battery voltage falls below 11.5 V, charge the battery immediately.

Protection alarms (3L-100B, 3L-150-P only)
If the display shows the 0 V value for the house battery, it is probable that the internal battery management system (BMS) intervened to avoid the excessive discharge.

The control unit will allow a deeper discharge than the internal battery management system (BMS) of the house battery:

When the battery is discharged the internal battery management system (BMS) triggers an alarm.

There are two ways to resolve the issue:

• Connect an external battery charger.
• Press the green icon inside the house battery icon . The control unit will connect the battery to the vehicle alternator shortly.

The control unit has an internal sensor that constantly monitors the ambient temperature.

When the ambient temperature is outside the 0 °C … 45 °C range, the system triggers an alarm:

The alarm disappears when the ambient temperature returns to the normal range.

Charging

When charging the battery with an external charger, the following guidelines should be observed:

• It is recommended to use chargers intended for charging lithium (LiFePO4) batteries. Other type of charger will reduce battery life.
• The charger must not perform any desulfation action.
• When using a configurable charger, set the constant current/constant voltage (CC/CV) option with the follow-ing values:
• Set the end of charge voltage to 14.4 V.
• Set the recommended maximum charging current for the battery.
• The maximum charging voltage should not exceed 14.5 V.

When the battery is charged by the alternator, the process is automatically managed by the control unit.

Storing

• Before storing fully charge the battery with a recommended battery charger for 1 – 2 days.
• When the battery is not in use, ensure that the battery voltage does not drop below 12.8 V.
• When storing the battery for a longer time completely recharge it every 30 days to prevent deep discharge and to ensure it is always ready for use.

Disposal

• Recycling packaging material: Place the packaging material in the appropriate recycling waste bins wher-ever possible.
• Recycling products with batteries, rechargeable batteries and light sources: Remove any batteries, rechargeable batteries, and light sources before recycling the product. Return defective or used batteries to your retailer or dispose of them at collection points. Do not dispose of any batteries, rechargeable bat-teries, and light sources with general household waste. If you wish to finally dispose of the product, ask your local recycling center or specialist dealer for details about how to do this in accordance with the ap-plicable disposal regulations. The product can be disposed free of charge.

FAQ

1. Where can I find the installation and operating manual?
   You can find the installation and operating manual online at https://documents.dometic.com/?object_id=88312

YOUR LOCAL DEALER AND SUPPORT
ndsenergy.eu
A complete list of Dometic companies, which comprise the Dometic Group, can be found in the public filings of: DOMETIC GROUPAB Hemvarnsgatan 15 SE-17154 Solna Sweden

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>