MONSTOP NSP2-BF Station P Modern Hotel Alarm Clock User Manual

Station P
Setup & Usage Guide
Qi Certified Fast Wireless charging

Interface & Ports

1. Qi Charging Indicator
2. USB-A CHARGING PORT (2.4A)
3. USB Type-C CHARGING PORT (3A)
4. Qi Charging Pad
5. AC Power Sockets
6. Power Cord

Specifications

Installation

Connect the Station P into a wall outlet (125V AC).
If desired, place the security C-Clamp over the power cable and affix to furniture or wall.

USB Charging

Station P features two USB ports to charge phones and other devices. The USB-A port provides 2.4A power and USB Type-C port provides 3A power. If both the USB-A and USB-C are used concurrently the USB-A will provide 1A power and the USB-C will provide 2.4A power.

Qi wireless charging

Place your wireless device on top of the Station P.
Charging will begin on contact. When wirelessly charging, the LED indicator is continuously solid green.
NOTE: Works with all Qi certified compatible devices including: iPhone 8, iPhone X and all newer iPhone models and many Android Phones.
NOTE: Provides 10W of charging power for faster Qi wireless charging.
NOTE: Station P has a protective circuit that detects when foreign objects or devices that are Qi certified are placed on the charging and will disable power to the charger as a safety precaution. When triggered the LED indicator will light red.

AC Power Sockets + Surge Protection

Station P features two tamper resistant (TR) power sockets to plug in laptop and power chargers for other electronic devices with surge protection.

FCC STATEMENTS

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant toPart 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in  a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment complies with FCC radiation exposure limit set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body.

Supplier’s Declaration of Conformity
Product Name: Station P
Model number: NSP2
Responsible party:
Nonstop,Inc.
10624 S.Eastern Ave,Suite A-979, Henderson,NV 89052,United States
+1775-398-3038
connectf@nonstopproducts.com
Compliance information: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including  interference that may cause undesired operation.

SAFETY PRECAUTIONS

Some of the following information may not apply to your particula product; however, as with any electronic product, precautior)s should be observed during handling and usvve.

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow g@ll instructions.
5. Do not I use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not|block any of the ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not|install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or groundrtype plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prpng are provided for  your safety. When the provided plug does not fit into your outlet, consult an electric|an for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer
12. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
    a. Do not expose this unit or the AC/DC adaptor to dripping or splashing water. Keep liquid-filled objects, such as vases, away from this unit and AC/DC adaptor.
    b. To ensure that this unit is completely disconnected, unplug it from the wall.
    c. Ensure that the AC/DC adaptor is easily accessible.
    d. Please note the information printed underneath the unit.
    e. Do not impede the ventilation of this unit by covering the ventilation openings with items such as newspapers, table-cloths, curtains, etc.
    f. Keep open flames, such as lighted candles, away from this unit.
    g. Do not place this unit in closed bookcases, racks, or other spaces without proper ventilation.
    h. The socket-outlet shall be installed near the equipment and shall be easily accessible.

To Reduce the Risk of Electric Shock — Use Only indoors
CAUTION: Do not install this device if there is not at least 10 meters{36-feet)j-ormore-of-wire-between the ectrical outlet and the electrical service panel.
The device feafures an internal protection that will sconnect the surge protective component but will aintain power to the load now unprotected. If this tuation is undesirable for the application, follow the anufacturer|s instructions for replacing the device.

SAFETY SPECIFICATIONS

Continuous Duty Electrical Rating
125VAC 12A 60Hz 1500W
Maximum Energy Dissipation
615J L-N 205J L-G 205J N-G 205J
Maximum Spike Current
36000A L-N 12000A L-G 12000A N-G 12000A
UL Clamping Voltage (3-line)
UL1449 800V
VPR L-N 1200V, L-G 1200V, N-G 1200V
Tamper Resistant Sockets (TR)
Spill Test
UL498 by ETL (Intertek Lab)

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
NO UJSER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
ATTENTION: The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance oid the user’s authority to operate the equipment.
ATTENTION: POUR EVITER LES CHOC ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS NE CORRESPONDANTE DE LA PRISES ET POUSSER JUSQU’AU FOND.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

Nonstop Inc. All Rights Reserved.

Documents / Resources

| MONSTOP NSP2-BF Station P Modern Hotel Alarm Clock [pdf] User Manual
NSP2-BF Station P Modern Hotel Alarm Clock, NSP2-BF, Station P Modern Hotel Alarm Clock, Modern Hotel Alarm Clock, Hotel Alarm Clock, Alarm Clock
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>