Geek Chef GCF20D Espresso Machine User Guide

GCF20D Espresso Machine

Product Information

Product Name: GCF20D

Size: A4

Weight: 128g

Contact Information:

Customer Support: 1-844-801-8880

Email: care@geektechnology.com

Specifications

• Size: A4
• Weight: 128g

Product Usage Instructions

The First Time or a Long Time Not Using the Machine

1. Before making espresso, make sure the knob is on the OFF
   position.

2. Fill water into the water tank, making sure not to exceed the
   MAX line.

3. Set up the water tank vertically and align the buckles to the
   hole on the back of the machine. Press it down to be parallel to
   the top of the machine.

4. Remove the red silicone cap from the bottom of the water
   tank.

5. Place a big cup under the steam wand. When all indicators stay
   on, turn on the steam control knob slowly.

6. Make sure the steam wand nozzle is clean and not blocked.

7. Let the water flow out of the steam wand for about 80ml or 1-2
   minutes, then turn off the steam control knob. This process allows
   water to flow into the empty pump for the first use.

8. Place a cup on the drip tray. Press the Espresso button to flow
   out hot water for cleaning the filter holder or the coffee
   cup.

9. Plug in the power cord and press the ON/OFF button. All
   indicators will flash, indicating that the machine is
   preheating.

Quick Start Guide – Froth Milk Alone

1. Press the milk frothing button and wait for the milk frothing
   indicator to stop flashing. Weak steam can result in a bad frothing
   effect.

2. Prepare a pitcher with about 100ml of milk. Insert the steam
   wand nozzle into the milk about 0.4-0.8 inches. Slowly turn on the
   steam control knob to control the steam volume.

3. Froth the milk by moving the vessel round from up to down. Stop
   when the milk increases in volume by 2 times or reaches the desired
   purpose, and turn the knob back to the OFF position. Remove the
   pitcher.

4. During milk frothing, if there is a lack of water, the machine
   may produce louder noise and smaller steam. Please refill in
   time.

5. To prevent the steam wand nozzle from blocking and make it
   easier to clean, it is suggested to clean it immediately after
   frothing milk.

6. Turn off the steam control knob. Press and hold the steam wand,
   pull out the stainless steel sleeve, and clean the steam nozzle
   with a damp cloth or sponge.

Make Espresso Alone

1. Insert the filter into the filter holder. Fill ground coffee
   into the filter and press it with the tamp spoon. The ground coffee
   should be pressed evenly and not too firmly.

2. Install the filter holder into the machine from Unlock to Lock
   position. Place a cup on the drip tray.

3. Press the single-cup switch or double-cup switch. The espresso
   indicator will flash, and the machine will start brewing.

4. The machine will stop automatically when coffee brewing is
   finished.

5. Remove the filter holder from Lock to Unlock position. Remove
   the coffee grounds and clean the filter holder with water. Rinse
   the seal ring with a wet cloth.

FAQ

Q: What should I do if the machine produces a louder noise and

smaller steam during milk frothing?

A: Please refill the water tank with enough water to ensure
proper operation.

Q: How should I clean the steam wand nozzle?

A: Turn off the steam control knob, press and hold the steam
wand, pull out the stainless steel sleeve, and clean the steam
nozzle with a damp cloth or sponge.

Q: How should I clean the filter holder?

A: Remove the filter holder from Lock to Unlock position, remove
the coffee grounds, and clean the filter holder with water. Rinse
the seal ring with a wet cloth.

GCF20D A4 128g

1- 844 – 801- 8880

care@geektechnology.com

THE FIRST TIME OR A LONG TIME NOT USE THE MACHINE

Before making
02 espresso, make sure the knob is on the OFF position.

Fill water into the water tank NOT exceed the MAX line. Set
04 up the water tank vertically and align the buckles to the hole on the back of the machine, and press it down to be parallel to the top of the machine.

Make sure to remove
01 the red silicone cap from the bottom of water tank.
Place a big cup under the steam wand. When
06 all indicators stay on, turn on the steam control knob slowly.

Make sure the steam
03 wand nozzle is clean and no blocking.
Let the water flow out of the steam wand about 80ml (about 1~2 minute),
07 then turn OFF the Steam control knob. This process is let the water flow into the empty pump for the first use.
Place a cup on the drip tray. Press the Espresso
08 button to flow out the hot water to clean the filter holder or the coffee cup.

Plug in the power cord,
05 press ON/OFF button, all indicators will flash the machine is preheating.
QUICK START GUIDE
GCF20D Retain This Instruction For Future Reference

FROTH MILK ALONE

01
Press the milk frothing button. Please wait the milk frothing indicator stop flashing. Otherwise it comes out with weak steam, which will make bad frothing effect.

02
Prepare a pitcher with about 100ml of milk. Insert the steam wand nozzle into the milk about 0.4-0.8inch. Slowly turn on the steam control knob to control the steam volume.

03
Froth milk in the way moving vessel round from up to down, after the milk increase in volume by 2 times or the required purpose is reached, turn the knob back to “OFF” position to stop. Take away the pitcher.

Note

:

During the milk frothing, if lack of water, the machine louder noise and small steam, please refill in time.

will

produce

04
In order to prevent the steam wand nozzle from blocking and make it eaiser to clean, we suggest you to clean it immediately after frothing milk.
05
Turn off the steam control knob. Press and hold the steam wand, pull out the stainless steel sleeve. Clean the steam nozzle with damp cloth / sponge.

Warning :

The steam wand Please mind the

may be very hot during and after hot water and operate carefully.

use.

——————————————————–

1- 844 – 801- 8880

care@geektechnology.com

MAKE ESPRESSO ALONE

01
Insert the filter into the filter holder. Fill ground coffee into the filter and press it with the tamp spoon. The ground coffee should be pressed evenly and not too firmly.
02
Install the filter holder into the machine from “Unlock” to “Lock” position. Place a cup on the drip tray.

03
Press the single-cup switch or double-cup switch the espresso indicator will flash, the machine start brewing.

04
The machine will stop automatically when coffe brewing finished.

05
Remove the filter holder from “Lock” to “Unlock” position. Remove the coffee grounds and clean the filter holder by water. Rinse the seal ring with wet cloth.
Note : Be careful the hot water of machine brewer and hot coffee grounds.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>