kolin KEA-60BDRDCA AC Evaporative Air Cooler User Manual

kolin KEA-60BDRDCA AC Evaporative Air Cooler

Product Information

Main Specifications

• Model: KEA-60BDRDCA
• Power Supply : AC/DC

Range of Application

This product is suitable for use in various environments, including:

• Residential homes
• Offices
• Warehouses
• Workshops

Using Environment

Please ensure that the following conditions are met when using the AC/DC evaporative air cooler:

• Indoor use only
• Avoid using in areas with high humidity or moisture
• Avoid using near flammable materials
• Ensure proper ventilation in the room

Components/ Structure Diagram

The AC/DC evaporative air cooler consists of the following components:

• Water tank
• Cooling pad
• Control panel
• Caster wheels
• Remote controller (included)

Circuit Wiring Diagram

Please refer to the circuit wiring diagram provided in the user manual for detailed information on the electrical connections.

Installation Instruction

To install the AC/DC evaporative air cooler, please follow these steps:

1. Select a suitable location near a power source and with proper ventilation.
2. Place the air cooler on a stable and level surface.
3. Ensure that the water tank is securely attached to the air cooler.
4. Connect the AC/DC power cord to the appropriate power source.

Introduction to AC/DC Evaporative Air Cooler

The AC/DC   evaporative air cooler is a versatile cooling solution that can be powered by either AC or DC sources. It offers the following power supply options:

• Works with battery
• Works with AC power
• Works with solar panel

Way 1: Works with battery

To use the air cooler with a battery, please follow these steps:

1. Connect the battery to the air cooler using the provided cables.

Way 2: Works with AC power

To use the air cooler with AC power, please follow these steps:

1. Connect the AC power cord to the air cooler and a suitable power outlet.
2. The battery will automatically charge when the air cooler is connected to AC power.
3. Use the switch on/off for the DC cord to control the power supply from the battery.
4. Charge the battery as needed to ensure continuous operation.

Way 3: Works with solar panel

To use the air cooler with a solar panel, please follow these steps:

1. Connect the solar panel to the air cooler using the provided cables.

Operating Instruction

LED control panel

The air cooler is equipped with an LED control panel that allows you to adjust various settings. Use the buttons on the control panel to:

• Turn the air cooler on/off
• Adjust the fan speed
• Set the timer
• Select the cooling mode

Remote Controller

The air cooler comes with a remote controller for convenient operation. Use the remote controller to:

• Turn the air cooler on/off
• Adjust the fan speed
• Set the timer
• Select the cooling mode

Maintenance Instruction

Cleaning the water tank

To clean the water tank, please follow these steps:

1. Disconnect the power supply and drain any remaining water from the tank.
2. Clean the tank using a mild detergent and a soft cloth.
3. Rinse the tank thoroughly with clean water.
4. Allow the tank to dry completely before refilling it.

Cleaning the cooling pad

To clean the cooling pad, please follow these steps:

1. Disconnect the power supply and remove the cooling pad from the air cooler.
2. Rinse the cooling pad with clean water to remove any dust or debris.
3. Allow the cooling pad to dry completely before reinstalling it.

Replacing the cooling pad

If the cooling pad is damaged or worn out, it may need to be replaced. To replace the cooling pad, please follow these steps:

1. Disconnect the power supply and remove the old cooling pad from the air cooler.
2. Install the new cooling pad by following the instructions provided in the user manual.

Cleaning outside of the air cooler

To clean the exterior of the air cooler, please follow these steps:

1. Disconnect the power supply.
2. Wipe the surface of the air cooler with a damp cloth.
3. Dry the surface with a clean cloth.

Check the mechanical parts

Regularly check the mechanical parts of the air cooler to ensureproper functioning. If any parts are damaged or malfunctioning, contact our customer support for assistance.

Troubleshooting

If you encounter any issues with the AC/DC evaporative air cooler, please refer to the troubleshooting section in the user manual for possible solutions.

FAQ

Q: Can I use the air cooler outdoors?

A: No, the AC/DC evaporative air cooler is designed for indoor use only.

Q: How often should I clean the water tank?

A : It is recommended to clean the water tank at least once a month to maintain optimal performance.

Q: Can I use the air cooler without filling the water tank?

A: No, it is essential to fill the water tank with water for the air cooler to function properly.

Please carefully read and retain the Manual for reference before using the product. The manual has undergone thorough verification, but in the event of any misprints or misleading information, we reserve the right to provide the correct interpretation. Additionally, please note that our products are subject to continuous updates, which may include changes in technology, appearance, color, etc., without prior notice. The actual product and its nameplate will always take precedence. Any changes will be reflected in the updated version of the Manual.

Introduction

Overview of the Product and its Benefits

Thank you for choosing our evaporative air cooler. This user manual is designed to provide you with all the information you need to use and maintain your air cooler properly. Before operating your air cooler, please read this manual carefully to ensure that you get the most out of your new appliance. Our air cooler is an innovative solution for indoor and outdoor cooling needs. It uses the natural process of evaporation to cool the surrounding air, making it an energy-efficient and eco-friendly alternative to traditional air conditioning. Our air cooler is perfect for use in homes, offices, workshops, warehouses, and outdoor areas such as patios, decks, and garages. We are confident that our evaporative air cooler will provide you with reliable and effective cooling performance for many years to come. If you have any questions or concerns about your air cooler, please refer to this manual or contact our Kolin customer support team hotline for assistance.

Some of the key benefits of using our evaporative air cooler include:

1. Our air cooler is designed to provide effective cooling without consuming excessive energy, resulting in cost savings on your electricity bill.
2. Our air cooler does not use any harmful refrigerants or chemicals, making it a more environmentally friendly option for cooling your space.
3. Our air cooler is easy to move around, making it a versatile and convenient cooling solution for any space, thanks to its caster wheels.
4. Our air cooler comes with intuitive controls and settings that make it easy to operate and adjust to your desired comfort level.
5. Our air cooler helps improve indoor air quality by humidifying and purifying the air, reducing the risk of allergies, asthma, and other respiratory problems.

We are confident that our evaporative air cooler will provide you with reliable and effective cooling performance for many years to come. If you have any questions or concerns about your air cooler, please refer to this manual or contact our Kolin customer support team hotline for assistance.

Its working principle is a “direct evaporative” humidification and cooling technology. Not only have cooling functional but also can achieve cooling effect of air humidification. Continuously circulating pump draws water from the water tank, and then the water distributed to the wet curtain. When the hot air enters into the wet curtain which is a cell-type filter layer made of special material, and then it exchanges energy with water, a satisfactory effect of cooling can be obtained. Pure cool and clean air then blows indoors under a pressure rendered by air blower while the hot air goes out of the room through open vents or windows. Such cycle achieves the goal of lowering the temperature in the room.

Safety Instruction

To ensure safe and proper use of your air cooler, kindly see the meaning of the symbols below:

Your personal and property safety is of utmost importance. To minimize the risk property damage and personal injury, it is crucial to follow the safety guidelines provided in the Manual. Make sure to read and understand the Manual before operating the product. Neglecting these instructions can lead to complications and undesirable consequences. Prioritize a thorough understanding of the Manual for a smooth and safe user experience.

These precautions pertain to installation, use, and maintenance.

Do not: This symbol indicates actions that must never be performed.

WARNING

• Before plugging in the air cooler, carefully check the power cord for any damage. If the cord is damaged, do not use the air cooler. Instead, contact our Kolin hotline or authorized service center for immediate assistance..
• Always operate the air cooler from a power source that matches the specified voltage, frequency, and rating indicated on the product identification marking.
• Keep the air cooler away from children and pets. Ensure children are supervised around the unit at all times.
• Keep the air cooler away from water and other liquids to prevent electrical shock.
• Avoid operating the air cooler with wet hands to prevent electric shock. If the air cooler with water is overturned, immediately unplug it from the power source. Restart the air cooler only after it has thoroughly dried, as malfunction may occur otherwise. Always unplug the air cooler before cleaning or performing maintenance.
• Avoid using the air cooler if it has been dropped, damaged, or exposed to extreme temperatures. CAUTION
• After adding water, do not tilt, collide, lay, or move the air cooler to any position that may cause water to overflow. Do not overturn the air cooler.
• In high humidity conditions, it is advisable to use the wind mode instead of the cool mode, as the latter has a humidifying effect.
• Always disconnect the air cooler’s power supply before moving it from one location to another.
• Remember to unplug the air cooler when not in use.
• Avoid placing the air cooler too close to walls or window curtains, as this may block the airflow.
• Refrain from inserting any objects or body parts into the air cooler while it is operating.
• Clean the air cooler with a damp cloth, but do not flush it with water directly.
• Avoid placing the air cooler near heat sources or open flames.
• Only qualified professionals should perform repairs on the air cooler.

Do not cover the guard or operate the air cooler too close to curtains, furniture, or other objects. Do not place any objects on top of the air cooler. Do not obstruct the air outlet and provide at least 1 meter of space in front and behind the air cooler. Do not use the air cooler in environments with high humidity or excessive moisture. By diligently following these safety instructions, you can help prevent accidents or hazards while using your AC/DC air cooler.

Product Description

Specifications

Range of Application

The AC/DC air cooler is suitable for use in small to large-sized rooms or outdoor spaces, such as living rooms, patios, and garages. They are often used in areas with low humidity levels to provide a comfortable and cool environment.

Air coolers are not recommended for use in areas with high humidity levels as they can increase
the humidity and make the environment feel damp and uncomfortable. They are also less effective in cooling large rooms or spaces with poor ventilation. It’s important to note that air coolers work by evaporating water, so they work best in dry and arid climates. In areas with high humidity levels, they may not be as effective in reducing the temperature or may even increase the humidity levels. When using an air cooler, it’s important to keep the doors and windows open to allow proper  ventilation and air circulation. It’s also recommended to place the air cooler near a window or door to allow the hot air to escape and the cool air to circulate effectively.

Using Environment

1. Environment Relative Humidity: ≤ 60%
2. Atmospheric pressure: 86kpa~106kpa
3. 0°<Water supply temperature <45° , water supply pressure: 0.15~0.6mpa
4. Voltage range: DC12V(8~12V), Voltage
5. No harmful or damaging gases

Components / Structure Diagram

Water tank : The AC/DC air cooler features a water tank that holds up to 60 liters of water.
Cooling pads : The air cooler has cooling pads that absorb water from the tank and use the natural process of evaporation to cool the surrounding air.
Dust proof filter: The air cooler also features a dust proof filter that helps to trap dust and other particles, keeping the air clean and fresh.
Blower fan: The air cooler has a powerful blower fan that distributes the cooled air evenly across the room.
Control panel: The air cooler features a control panel that allows you to adjust the fan speed, cooling level, and timer settings.
Ice packs: The air cooler comes with 2 ice packs that are already placed on top of the unit to provide an extra boost of cooling. (Please do not open the ice packs; its inedible)
Caster wheels: The air cooler is equipped with caster wheels that make it easy to move around

Circuit Wiring Diagram

Installation Instruction

Read Safety Precautions Before Installation
Incorrect installation due to ignoring instruction can cause serious damage or injury.

1. Unpacking: Open the package and remove all packing materials. Take out the air cooler.
2. Installation of Caster Wheels.
   • Step 1: Place the machine on a flat surface.
   • Step 2: Gently tilt the machine and attach two caster wheels with stoppers at the front using a wrench.
   • Step 3 : Repeat step 2 to attach the other two caster wheels on the opposite side.
3. Adding Water: There are 3 ways to fill in the water tank:
   • Way 1: Open the water inlet on the top cover and pour water into it.
   • Way 2: Open the water inlet at the back of the unit and pour water into it.
   • Way 3: Use the inlet for a hose, which you can find on the side of the water tank for continuous water supply. The floating ball will automatically shut down the water source once the tank is filled.
   • Note: When using a hose, the diameter of the inlet for the hose is 21mm(G1/2″)
   • Note: When using the first two ways of filling the water, observe the water level indicated by the floating ball and pay attention to the following:
   • Avoid splashing water onto the motor to prevent damage to the electrical components.
   • Ensure that the water level is below the maximum level (H). Please refer to the water indicator at the front of the tank to prevent overflowing.
   • Only use clean water to fill up the air cooler.
4. Place the air cooler on a flat surface and make sure it is plugged in (AC)
5.  Turn on the air cooler by pressing the ON/OFF button on the Panel control or remote controller. During the initial use, the default setting is “COOL MODE”. In this setting the pump is turned on.
6. Select your desired fan speed by pressing the speed button on the LED control or remote controller.You can choose from six different speed levels, with level 6 being the highest.
7. If you want the air cooler to oscillate and distribute air throughout the vicinity, press the swing button on the Panel control or remote controller. This will move the vertical louvers automatically from left to right, while the horizontal louvers can be adjusted manually to direct the air away from you if desired.
8.  If you want to use the ice packs for extra cooling, make sure that they are ice before use, as they are already placed on top of the unit. Do not open the ice packs, as it is inedible. You can also add ice tubes if you want, but be careful not to overflow on the top of the cover. Make sure that the top cover can still close and avoid placing the ice on the side where the holes are.
9. When you’re done using the air cooler, turn it off by pressing the ON/OFF button on the Panel control or remote controller.

Note :
When using the air cooler for the first few hours, you may notice a slight odor. This is normal and should dissipate after a few hours of use. This is due to the materials used during  manufacturing and is not harmful to your health. To reduce the odor, it is recommended to run the air cooler on the highest speed with a full tank of water for a few hours in a well-ventilated area. After this initial period, the odor should dissipate. If the smell persists, please contact our Kolin customer support for assistance.

Remember to always follow the safety instructions provided in this manual, such as avoiding splashing water onto the motor and ensuring that the air cooler is placed on a flat surface before use.

Introduction to AC/DC Evaporative Air Cooler

Disclaimer : Please be advised that the battery and solar panel are not included in the AC/DC Air Cooler package. If you wish to operate the unit using a battery and solar panel, we recommend seeking assistance from a qualified solar panel expert to ensure proper installation and compatibility.

AC/DC Air Cooler is a unique type of evaporative air cooler that can run on solar energy. Unlike conventional air coolers, it converts solar energy from the sun into chemical energy and stores it in a battery. This battery serves as the power source for the air cooler, making it a cost-effective and eco- friendly choice for cooling your space.
AC/DC Air Cooler is designed with a simple and easy-to-use mechanism, making it suitable for a wide range of users. Its economical operation and low environmental impact make it an excellent  choice for those living in rural areas where access to electricity may be limited. To ensure optimal performance, it is important to keep the battery charged and to position the solar panel in an area that receives sufficient sunlight. Please refer to this user manual for further instructions on how to operate and maintain your AC/DC Air Cooler.

Power Supply Options

This AC/DC air cooler is designed to provide versatility in powering options, catering to different preferences and needs. Here are the various ways you can power the unit:

• AC Plug: The air cooler can be plugged into a standard 230V~ AC outlet
• DC Plug: The unit comes with a 12V DC power cord that enables you to power it using a car battery or a similar power source.
• Solar Panel: The air cooler is designed to be used with a solar panel. We recommend consulting a solar panel expert to determine the suitable panel size and power output required for optimal performance.
• Full Solar System: For optimum performance and environmental friendliness, this air cooler can be powered by a complete solar system. Please ensure that the solar panel, charge controller, and battery are all compatible with each other and we recommend consulting a solar panel expert.

Note that it is important to use an appropriate power supply that matches the air cooler’s rated power consumption. Using an inadequate power supply can cause damage to the unit and void the warranty

Ways to Connect your AC/DC Air Cooler

Way 1: Works with battery

Connecting the Battery:
Make sure to connect the positive and negative terminals correctly to avoid potential short circuits. For optimal performance, ensure that the battery is fully charged.

Safety Reminders:

When connecting the alligator clips, be careful not to let the metal rods touch or collide with each other, as this may cause a short circuit and produce up to 15 volts of electricity. Keep the clips separated and secure when using the air cooler’s AC/DC function to avoid any electrical mishaps.

Way 2: Works with AC power source

To operate the air cooler using an AC power source, plug the AC plug into an electrical outlet 230V

Battery will automatically charge:

Please note that when the air cooler is plugged into an AC outlet and the DC plug is connected to a 12v battery, the battery will autommatically begin to charge. Take note that there is no indicator to show if the battery is already fully charged.

Switch On/Off for DC cord:

The air cooler is equipped with a switch at the back that can be used to cut off the current from the DC cord. Turn OFF (o) this switch when not using the battery or solar panel or when the battery is fully charged. Only turn ON (I) the switch when using the DC cord to prevent potential electrical hazards.

Charging the Battery:

• The charging time for a battery can vary depending on the capacity of the battery and the charging rate of the charger.
• Monitor the battery while it is charging and check the charger periodically to make sure it is not overheating or showing signs of damage.
• As a general rule, a fully discharged battery can take anywhere from 4-12 hours to fully charge, depending on the charging rate and battery capacity.
• It is important to monitor the battery while it is charging and not leave it on the charger for an extended period of time once it is fully charged.

Remember to always follow the manufacturer’s instructions when charging your battery, and if you have any doubts or questions, consult a professional.

Time to fully charge battery

Battery Capacity| Air cooler(Off)| Air cooler(On)

Ampere per hour (Ah)

| Ampere(A)
13| 4.5
Hour(s)
190| –| 200| 14.62| –| 15.38| 42.22| – 44.44
170| –| 180| 13.08| –| 13.85| 37.78| – 40.00
150| –| 160| 11.54| –| 12.31| 33.33| – 35.56
130| –| 140| 10.00| –| 10.77| 28.89| – 31.11
110| –| 120| 8.46| –| 9.23| 24.44| – 26.67
90| –| 100| 6.92| –| 7.69| 20.00| – 22.22
70| –| 80| 5.38| –| 6.15| 15.56| – 17.78
50| –| 60| 3.85| –| 4.62| 11.11| – 13.33
30| –| 40| 2.31| –| 3.08| 6.67| – 8.89

Calculate the Charging Time and Charging Current for Battery Charging:

Calculate the Charging Time and Charging Current for Battery Charging: The time it takes to charge the battery depends on the battery capacity. When using the AC/DC air cooler, it can automatically recharge when connected to AC230V~ and the battery at the same time.

When,

• Ah = Ampere per hour rating of Battery.
• A = Current in Amperes.
• T = Time in hours.

The air cooler’s working current is 8.5A when the water pump is on and 8.33A when the water pump is off. The power board PCB provides 13A current.

For example,

• If your battery capacity is 50Ah and the air cooler is off, it will take approximately 3.85 hours to fully charge the battery (T = 50Ah divided by 13A).
• If the air cooler is on at its highest fan speed, it will take about 11.1 hours to fully charge the battery (50Ah divided by 4.5A, which is the difference between the total current 13A and the working current of 8.5A).

Overcharging

• Overcharging a battery can cause damage to the battery and potentially start a fire.
• If the charger does not have an automatic shut-off feature, make sure to monitor the battery closely to avoid overcharging.
• If you suspect that the battery has been overcharged, stop using it immediately and dispose of it properly.
• Do not leave the battery on the charger for an extended period of time once it is fully charged.

Safety Hazards

• Make sure to charge the battery in a well-ventilated area to prevent the buildup of explosive gases.
• Always wear eye protection and gloves when handling batteries and battery chargers.
• Keep the battery and charger away from open flames or sparks, as they can cause a fire orMexplosion.
• If the battery shows any signs of damage or leakage, do not attempt to charge it and dispose of it properly.
• Do not touch the battery terminals with bare hands or metal objects, as it can cause a short circuit.

Way 3: Works with Solar Panel

Can be connected to full solar system: If you would like to connect your air cooler to a full solar system, please consult with a solar panel expert for proper installation and guidance. It is important to ensure that the solar panel system can provide the necessary power for the air cooler’s DC input, and that the system is installed correctly to prevent any potential damage to the air cooler or the solar system.

Operating Instruction

After plugging into a DC12V or AC230V~/60Hz power outlet, it will enter standby mode.

1. ON/OFF

   • Connect the power and press ON/OFF to turn the device on in COOL state. Press the button again to turn off the device, including the fan motor, water pump, and LED screen.

2. COOL
   Press the COOL button to enter COOL mode, and the COOL display will light up. After 30 seconds, the fan motor will start working to blow cool air. Press the COOL button again to enter WIND mode, where the water pump is turned off, and the fan blows normal air.

3. WIND

   • Press the WIND button, the device will enter WIND mode, where the water pump will be turned off, and the fan motor will continue to run at the selected speed. In this mode, the device will only provide air circulation and does not cool the air with water.

4. SPEED

   • Use the SPEED buttons to switch between the six wind speed levels, from low to high.

5. SWING

   • Press the SWING button to move the vertical louvers automatically from left to right, to adjust the direction of the air flow.
   • NOTE: HORIZONTAL LOUVERS
   • Manually adjust the horizontal louvers to change the direction of airflow (Up/Down)

6. SLEEP

   • Press SLEEP button, the speed of the fan motor will be lowered from high to low, and then from low to high again. To exit sleep mode, simply press the SLEEP button again.

7. TIMER

   • When the device is off, press the TIMER button to set a shutdown time between 1 and 12 hours.The LED screen will display the current timer setting. When the time is up, the device will automatically turn on in COOL mode.
   • When the device is on, press the TIMER button to set a shutdown time between 1 and 12 hours. The LED screen will display the current timer setting. When the time is up, the device will automatically turn off.
   • Note: The timer function will not work if the device is unplugged or there is a power outage.

8. POWER

   • Connect to a power source and press ON/OFF button to turn the device on in COOL mode. Press the button again to turn off the device, including the fan motor, water pump, and LED screen.COOL
   • Press the COOL button to enter COOL mode, and the COOL display will light up. After 30 seconds, the fan motor will start working to blow cool air. Press the COOL button again to enter WIND mode, where the water pump is turned off, and the fan blows normal air.

9. WIND

   • Press the WIND button, the device will enter WIND mode, where the water pump will be turned off, and the fan motor will continue to run at the selected speed. In this mode, the device will only provide air circulation and does not cool the air with water.

10. SPEED

    • Use the SPEED button to switch between the six wind speed levels, from low to high.

11. SWING

    • Press the SWING button to move the vertical louvers automatically from left to right, to adjust the direction of the air flow.
    • NOTE: HORIZONTAL LOUVERS
    • Here are some tips: Manually adjust the horizontal louvers to change the direction of airflow (Up/Down)

12. SLEEP

    • Press SLEEP button, the speed of the fan motor will be lowered from high to low, and then from low to high again. This creates a gentler airflow that is less likely to disturb your sleep. To exit sleep mode, simply press the SLEEP button again.

13. TIMER

    • When the device is off, press the TIMER button to set a starting time between 1 and 12 hours. The LED screen will display the current timer setting. When the time is up, the device will automatically turn on in COOL mode.
    • – When the device is on, press the TIMER button to set a shutdown time between 1 andhour. The LED screen will display the current timer setting. When the time is up, the device will automatically turn off. Note: The timer function will not work if the device is unplugged or there is a power outage.

Note : When the button is pressed, a buzzer will ring every time. The remote controller operates the same as the

control panel. In cool mode, if the water level remains below the warning level for 15 minutes, the pump will automatically turn off. When the water level falls below the warning level, the audible buzzer will sound and the cool mode indicator light will blink continuously, indicating the need for water refilling. Kindly turn off and unplug the unit before refilling to ensure proper operation.

Maintenance Instruction

Turn off the power before performing maintenance or repairs on the machine to prevent accidents. To ensure that your air cooler is always in good working condition, it is important to perform regular maintenance and cleaning, wipe the machine body with a clean cloth every day or every week. The interior of the machine should also be cleaned regularly, with the recommended cleaning interval being once a month.However, the actual cleaning frequency will vary depending on the exterior environment.

Here are some tips:

Cleaning the Water Tank

To ensure that your air cooler is always in good working condition, it is important to perform regular maintenance and cleaning. Please follow the steps below to keep your air cooler clean and hygienic.

Step 1: Turn off the power

Before performing any maintenance or repairs, turn off the power to prevent accidents.

Step 2 : Remove panels and cooling pads

Unplug the cooler, turn off the water, and then remove the panels and air cooler cooling pads.

Step 3 : Drain water out of the air cooler

Open the drain plug to drain the water out of the air cooler

Step 4 : Brush out the inside of the cooler

Use a soft cloth or sponge to sweep the inside of the air cooler. Some debris can get inside it, causing blockages that stop up the cooler and may lead to unclean water cycling through it.

Step 5: Clean with water and mild soap

Step 6: Sanitize the water tank

Periodically empty the water tank and sanitize it every three days. Hot and humid climates are ideal conditions for bacteria to grow, so you must ensure that the water tank is always clean to prevent bacteria from reproducing.

Note: Be careful not to touch the water pump and water level sensor inside the water tank. Also, pay attention not to change the position of the float ball and valve at the side of the water tank.

By following these steps, you can maintain and clean your air cooler to keep it in good working condition. Please note that the actual cleaning frequency will vary depending on the exterior environment.

Cleaning the Cooling Pad

The cooling pads, also known as heat exchangers, are essential components for the proper operation of the portable evaporative cooler. It is recommended to clean the cooling pads once a month to ensure that the unit is working effectively.

Step 1 : Soak the Pads

Submerge the cooling pads in a mixture of water and lemon juice for 30-60 seconds. Alternatively, you can use a 50-50 solution of water and vinegar to clean the pads. Avoid using strong detergents as they may damage the pads.

Step 2: Air Dry the Pads

After the cooling pads have been thoroughly soaked, rinse them off and set them aside to air dry completely before reinstalling them in the unit. Alternatively, you can use the WIND mode to let the pads air dry, with the water pump turned off.

Attention

Please note that during cleaning, it is important to avoid using high water pressure as it can damage the honeycomb structure. Additionally, do not use acidic or alkaline detergents as they can cause corrosion and deterioration over time. Instead, use a mild soap solution or a mixture of water and lemon juice or vinegar as mentioned earlier in this manual. Always follow the manufacturer’s instructions and guidelines for cleaning and maintenance to ensure the longevity and proper functioning of your air cooler.

Replacing the Cooling Pads

If you experience reduced air flow from your evaporative air cooler, it may be time to replace the cooling pads. Honeycomb pads typically last longer and require replacement every 3 to 5 years, depending on mineral buildup. Generally, cooling pads don’t need to be replaced annually. Replace the pads if they’ve lost thickness or show fraying material.

Cleaning Outside of the Air Cooler

• Air Cooler Body: Before cleaning, ensure that the unit is turned off and unplugged from the power source. Wipe down the outside with a damp cloth, using only water. Avoid using harsh chemicals that may cause damage to the unit.
• Filter : The air cooler’s filter can get clogged with dust and debris over time. The filter is located in the back and sides of the fan and should be cleaned regularly. To clean it, remove the filter and wash it with a mild soap solution. Rinse it thoroughly with clean water and let it dry completely before replacing it. It is recommended to clean the filter once a month.
• Eliminate Air Cooler Odors : Evaporative coolers may develop musty odors over time. To freshen up the portable cooler, add essential oils to the water. Mix 15 drops of scented essential oil with vinegar and place it in a spray bottle. After cleaning the air cooler, spray the essential oil mixture into the unit. This will help eliminate any unpleasant odors and leave a pleasant scent.

Check the Mechanical Parts

Motor

Check the mechanical parts. While you have the air cooler apart, use a few drops of lubricating oil on the motor and fan. Use a few drops to lubricate the parts.

Fan Blades

After a long time of use, the fan can be stuck, so it is important to pay attention to hygiene. When cleaning the fan, use a damp towel to wipe it clean, avoiding washing directly with water because it may contain the panel and the LED display. The fan should be cleaned once a month.

Other Tips to MaintainYour Air Cooler

Check the water level: Always make sure that there is enough water in the tank before turning on the air cooler. If the water level is low, refill the tank immediately. Store the air cooler properly: When not in use, store the air cooler in a cool and dry place. Make sure that it is properly covered to prevent dust and debris from accumulating.

• Do not use strong detergents that may cause damage to the air cooler.
• Pay attention to hygiene so as not to leak the electricity into the engine, which can cause a fire.
• After cleaning, dry the components before re-fitting and using. By following these maintenance and cleaning tips, you can ensure that your air cooler remains in good working condition and provides you with cool and refreshing air for a long time.

Troubleshooting

Unable to start the fan

| Power failure| Check power supply

Switch burned

|

Inspect and call our Kolin Service Hotline

No air flow

| Motor starter’s capacitor damaged|

Inspect and call our Kolin Service Hotline

Motor damaged

|

Inspect and call our Kolin Service Hotline

There is jam at honeycomb or air filter|

Clean out the wet

Airflow not cool

| Be short of water in water tank|

Add water

Water pump damaged

|

Inspect and call our Kolin Service Hotline

honeycomb is dirty| Clean the honeycomb

Unpleasant odor

|

Water or honeycomb is dirty

|

Change the water and clean honeycomb

Air cooler is not cooling effectively| Low water level, dirty or clogged cooling pads| Refill tank, clean or replace the cooling pads as needed

Air cooler is leaking water

| Improperly seated water tank, loose or damaged drain plug,

dirty or damaged cooling pads

| Check the water tank and drain plug, clean or replace the cooling pads as needed
Air cooler is making unusual

noises

| Debris or obstruction in fan blades| Turn off and unplug the air cooler, remove any obstructions, and contact

customer service if problem persists

Note: When using the air cooler for the first few hours, you may notice a slight odor. This is normal and should dissipate after a few hours of use. This is due to the materials used during manufacturing and is not harmful to your health. To reduce the odor, it is recommended to run the air cooler on the highest speed with a full tank of water for a few hours in a well- ventilated area. After this initial period, the odor should dissipate.

If the problem persists after attempting these solutions, please contact Kolin customer service for further assistance.

The company shall not assume any liability for issues or problems arising from the use of solar panels, solar chargers, and batteries. For further assistance, we recommend contacting a solar panel expert who can provide specialized guidance and support

If you have any concerns, please contact us at the following:

Customer hotline: (02) 8-852-6868
Text hotline: (0917)-811-8982
Email: customerservice@kolinphil.com.ph

Also, please like and follow us on our following social media accounts:

• Facebook: Kolin Philippines
• Instagram : kolinphilippines
• Youtube: kolinphilippines

SERVICE CENTERS

BRANCH / ADDRESS / TEL. NO.

• Bacolod / Door #A-2 & A-3 UTC Bldg., Alunan St., Brgy. Singcang, Bacolod City / (034) 433-0031
• Cagayan De Oro / Door #3 De oro Land Bldg., Julio Pacana St., Punted, Cagayan De Oro City/ (088) 856-4672
• Cebu / Unit #6 A. Geson Bldg., D. Jakosalem cor. F. Ramos St., Cebu City/ 032) 253-9997 / (032) 253-7944
• Dagupan / Unit #1107 Caranglaan District, Dagupan City Pangasinan/ (075) 523-2832
• Davao / Blk 17 Lot 9, Calamansi St., Juna Subd., Matina, Davao City/ (082) 227 – 7063
• Iloilo / Door #4 D’ Appliance Arcade, South Fundidor, Moli, lloilo City/ (033) 336-1970
• Pampanga / LRK Commercial Bldg., Jose Abad Ave., Lagundi Mexico, Pampanga/ (045) 455-2934

For More air conditioner tips, please like, share and follow us on our social media accounts:

• Face book: kolinphilippines
• lnstagrarn: kolinphilippines
• Youtube: kolinphilippines
• Tiktok: kolinphilippines
• Website: www.kolinphilcom.ph

OFFICE

• Kolin Bldg., 1854 Sta. Rita St., Guadalupe Nuevo, Makati City
• Service Hotline: (02) 8852-6868

PLANT

• Blk 3 Lot 5, Main Drive First Cavite
• Industrial Estate, Langkaan 1, Dasmariiias City, Cavite
• Tel. No.: (046) 402-0793

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>