JIUHU TECHNOLOGY JH-101 Call Center Headset User Manual

**JIUHU TECHNOLOGY JH-101 Call Center Headset User Manual

**

PRODUCT PARTS

1. +”:Volume up/Next song
2. -”: Volume down/Previous son
3. “M”: On/Off Button & MFB
4. Type-C charging port
5. Microphone
6. CNC noise canceling microphone
7. Mute Button
8. LED Indicator Light
   *MFB: Multifunction Button

BT Pairing Methods

1. Turn on Bluetooth on your phone.
2. Press and hold the On/Off Button for 2 seconds to power on the headset. Youwillhear “Power on. Pairing”, and the LED indicator flashes blue and red alternately
3. Search and tap to connect to”JH-101″on the Bluetooth device list of your phone.

Then you will hear “Your headset is connected”. The LED indicator will flashblueevery 10 seconds after paired. The phone shows that “JH-101” is connected.

Note:
The headset can also be connected to a computer by following the abovesteps.

To Pair with 2 Mobile Devices

You may pair the headset with 2 mobile devices (e.g. phones Or tablets) bythefollowing steps:

1. Follow the above pairing guide to connect the headset to device A, then switchofthe Bluetooth function of device A.
2. At this point, the headset automatically enters pairing mode.
3. Search and click to connect to”JH-101″ on the Bluetooth device list of deviceB.
4. After the headset is paired with Bluetooth function of device B,switchonthebluetooth function of device A and tap “siindoo-H6” to reconnect totheheadset. Now the headset is connected with two devices

Note:
When the headset is paired with two devices ,music can only be playedfromone.Ifyou want to play music on the other connected device , pause or stopplayingthemusic on the other
Previous one.if you want to answer a new Call from the other connectedphone,hangup the current call on the previous one

Operation Instructions

On/Off Button & MFB ****

**** On/Off Button & MFB

| Power on| Pres and hold the On/Off button for 2 seconds.
Power off| Pres and hold the On/Off button for 3 seconds.
Answer a call| Short pres the MFB to answer an incoming call.
Hang up a call| Short pres the MFB to hang up a call
Cancel dialing| Short pres the MFB to cancel dial
Reject a call| Press and hold the MFB for 2 seconds to reject an incoming call.
Audio switching| During a call, press and hold the MFB for 2 seconds to switch between the headset and phone speaker.
Redial a call| Double pres the MFB to dial the last number dialed.
Play/Pause| Short pres the MFB play/pause music.
Call waiting| To answer a new call and hang up the current call,short press the MFB.
To answer a new call and keep the current call,double press the MFB.
To keep current call and reject the new call,press and hold the MFB for 2 seconds.
**** Voice assistant| Press and hold the MFB for 2 seconds to activate the voice assistant on your phone(Only in thenon-calling state).

LED Indicator Light

Siri or google assistant
Long press button 2 seconds,Can activate Siri or google assistant

Charging instruction
While the headphone is in low battery please use Type-C charging cable tocharge. about 2 hours to charge full.

FAQS

Q:Can I use the headset while it

A:Yes,but extremely low battery or poor power quality may cause electrical noise. Wedo not recommend frequent use in this way as it will shorten the battery life.

Q: What should I do if the sound cuts in and out?

A: 1. Make sure to use the headset within the effective operation range (10meters).2.keep the headset away from electromagnetic interference devices suchasmicrowave ovens, base stations, etc. If the battery of the headset is low, please fully charge it before use.

Q: What's the password for pairing?

A: Some devices may require a password for pairing.Try entering 0000,8888, 1111, or1234.

Q: What devices can recharge the headset?

A: Any charger, car charger, power bank, PC, etc. with DC 5V/above 500mAoutput.

Q: What to do if I cannot turn the power on?

A: Check if the headset is in low battery state (red light flashes slowly). If itis,recharge the headset. Turn on the headset again after it is fully charged(steadybluelight). If this does not help,you may contact our customer service for moresupport.

Q: What to do if I fail to pair the headset with my devices?

A: 1.Turn of the power of the headset,and then turn it back on.Pair theheadsetwithyour device again. 2.Try to clear the pair record of the headset. Then pair the headset withyour deviceagain. 3.If the above method does not help, you may contact our customer serviceformoresupport.

Q:Why does the headset power off automatically?

A: When the headset is not connected over 10 minutes or the battery is toolow, theheadset will power off automatically.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference.
(2)This device must accept any interference received, including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide  reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the users encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an autlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>