Jiuhu Technology JH-ANC930-S Bluetooth Headphone User Guide
- September 18, 2024
- JIUHU TECHNOLOGY
Table of Contents
JH-ANC930-S Bluetooth Headphone
“`html
Specifications:
- Bluetooth chipset: JL7012,V5.3
- Bluetooth distance: >10m
- Frequency range: 2402–2480MHz
- Input: DC5V,1A
- Charging time: Around 1.5 hours
- Charging port: Type-C
- Battery capacity: 200 mAh
Product Usage Instructions:
Power On/Off Instruction:
Power on: In power-off mode, click the power
button.
Power off: In power-on mode, press and hold the
power button around 4 seconds.
Screen On/Off:
-
After power on, the screen will be off automatically if there’s
no operation action within 30 seconds. -
In power-on mode, the screen will be off automatically when put
back on the headset and will be on automatically when taken
out. -
In power-on mode, the screen will be off if you click the power
button and will be on if you click the power button again.
The Pairing Between Headset and Screen:
- Turn on the headset and the screen.
- Put the screen on the headset.
- Triple-click the power button of the headset.
- After successful connection, the bluetooth icon of the screen
will be white in color.
Note:
-
If the connection is unsuccessful, the bluetooth icon of the
screen will be red in color. -
If the connection is unsuccessful, please try again by
triple-clicking.
The Interface Introduction:
Charging: Connect the screen to the adaptor
using a Type-C charging cable.
FAQ:
Q: What should I do if the screen does not turn on
automatically?
A: If the screen does not turn on automatically, try clicking
the power button to turn it on manually.
“`
Headphone Screen
MODEL JH- ANC930PLUS Scr een
Function Instruction:
Type-C charging port Power button Communication pin
Power on/off Instruction:
Power on: In power-off mode,click the power button Power off: In power-on
mode,press and hold the power button around 4 seconds
Screen on/off :
1.After power on,the screen will be off automatically if no any operation
action on the screen within 30 seconds; 2.In power-on mode,the screen will be
off automatically when put back on the headset;and will be on automatically
when take it out; 3.In power-on mode,the screen will be off if click the power
button,and will be on if click the power button again.
The pairing between headset and screen
1.Turn on the headset and the screen; 2.Put the sreen on the headset; 3
.Triple-click the power button of headset; 4.After connect successfully,the
bluetooth icon of the screen will be white color; Note:
1. If connect unsuccessfully,the bluetooth icon of the screen is red color;
2. If connect unsuccessfully,please try again by triple-click
The interface introduction:
1. Music play Previous song/next song, music play/pause,display Lyrics 2.
Volume adjustment Volume up/down 3. ANC mode ANC mode,normal mode,transparency
mode 4. EQ adjustment(5 different EQ choice) Normal,rock,pop,classic,jazz mode
5. Alarm Can be user-defined 6. Brightness of screen Can adjust the degreen of
brightness 7. Language switch There are 18 diffeent Languages for choice 8.
Lock screen Wallpaper Can be user-defined 9. Light Can turn on the light or
turn off the light by touch the screen 10. Date&Time setting Can be user-
defined 11. Take photos If the headset is connected to mobile by bluetooth,and
turn on the camera of mobile,then can take photos by click 12. Give a like If
the headset is connected to mobile by bluetooth and play some vedios on the
app of mobile,then can click the screen to give a like
Charging:
Connect the screen to the adaptor by Type-C charging cable Note:Please notice
the direction when put the screen to the headset
Technical parameter
Bluetooth chipset Bluetooth distance Frequency range Input Charging time Charging port Battery capacity
JL7012,V5.3 >10m 2402–2480MHz DC5V,1A Around 1.5H Type-C 200 mAh
FCC Statement
1.This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1)This device may not cause harmful
interference. (2)This device must accept any interference received, including
interference that may cause undesired operation. 2. Changes or modifications
not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment. Note:This equipment has been tested
and found to comply with the limits for a class B digital device,pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and,if
not installed and used in accordance with the instructions,may cause harmful
interference to radio communications.However,there is no guarantee that
interference will not occur in a particular installation.if this equipmemt
does cause harmful interference to radio or television reception,which can be
determined by turning the equipment off and on,the user is encouraged to try
to correct the interference by one or more of the following measures: ·
Reorient or relocate the receiving antenna. · Increase the separation between
the equipment and receiver. · Connect the equipment into an outlet on a
circuit different from that to which the receiver is connected. · Consult the
dealer or an experienced radio/TV technician for help. The device has been
evaluated to meet general RF exposure requirement. The device can be used in
portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>